Introduction
Thank you for choosing the VanAcc Multi-Functional Sleeper Sofa Bed. This manual provides detailed instructions for the safe assembly, operation, and maintenance of your new sofa bed. Please read this manual thoroughly before assembly and retain it for future reference.
Image: The VanAcc Multi-Functional Sleeper Sofa Bed in its standard L-shaped configuration.
Safety Information
Please observe the following safety guidelines to ensure safe use of your sofa bed:
- All foam and upholstered surfaces meet flammability standards.
- Keep the sofa bed away from open flames or high heat sources.
- Supervise children and pets to avoid entrapment risks, especially during conversion between sofa and bed modes.
- Do not exceed the maximum weight limit of 600 pounds.
- Ensure all components are securely fastened before use.
Package Contents
Your VanAcc Sofa Bed is shipped in multiple packages. Please verify all components are present before beginning assembly. The package includes:
- Sofa sections (main sofa, chaise lounge)
- Back cushions and seat cushions
- Armrests with integrated USB ports and cup holders
- Hardware kit (bolts, washers, nuts, Allen wrench)
- Assembly instructions
- Throw pillows (if included with your model)
Image: Dimensional diagram of the sofa bed, indicating it ships in two packages and includes a 40-inch power cord.
Assembly Instructions
Assembly typically requires two people and takes approximately 30-45 minutes. All necessary tools are provided.
- Unpack Components: Carefully remove all parts from the packaging. Place them on a clean, soft surface to prevent scratches.
- Attach Legs: Securely attach the furniture legs to the bottom of each sofa section. Ensure they are tightened firmly.
- Connect Sofa Sections: Align the connectors on the main sofa and the chaise lounge. Slide them together until they lock securely. The chaise is reversible, allowing you to configure it on either the left or right side.
- Install Armrests: Attach the armrests to the sides of the sofa sections using the provided hardware. Ensure the USB charging ports are accessible and the power cord can be routed easily.
- Place Cushions: Position the seat and back cushions onto the sofa frame.
- Connect Power: Plug the power cord for the USB charging ports into a wall outlet.
Refer to the included assembly diagram for visual guidance.
Operating Instructions
Converting Sofa to Bed
To transform your sofa into a bed, gently pull the hidden bed mechanism located beneath the main seat cushions. The pull-out section will extend forward and lift to align with the seat height, creating a flat sleeping surface.
Image: The sofa bed in its extended sleeping position.
Using USB Charging Ports and Cup Holders
The armrests are equipped with two USB charging ports (5V/2A safe charge) and two built-in cup holders. Simply plug your device's USB cable into the port to charge. Use the cup holders for beverages.
Image: Close-up of the armrest showing the USB charging port and cup holder in use.
Accessing Hidden Storage
The chaise lounge features a flip-open hidden storage compartment. Lift the seat cushion of the chaise to access the storage space, ideal for blankets, pillows, or other items.
Image: The hidden storage compartment under the chaise lounge.
Maintenance and Care
Proper care will extend the life and appearance of your sofa bed. The upholstery fabric is Boucle.
- Cleaning: Wipe with a damp cloth for general cleaning.
- Stains: Address spills immediately. Blot with a clean, dry cloth. Avoid harsh chemicals.
- Fabric Care:
- Do not wash.
- Do not bleach.
- Do not tumble dry.
- Do not iron.
- Do not dryclean.
- The fabric is not removable.
- Cushions: Seat and back cushions are removable. Rotate and fluff cushions regularly to maintain their shape and extend their lifespan.
Image: Care instructions for the sofa bed fabric.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Sofa feels unstable after assembly. | Legs or connectors are not fully tightened. | Re-check and tighten all leg and section connectors. Ensure the sofa is on a level surface. |
| USB ports are not charging devices. | Power cord is not plugged in or is loose. | Ensure the power cord is securely plugged into both the sofa and a functional wall outlet. Check the wall outlet with another device. |
| Pull-out bed mechanism is stiff or difficult to operate. | Mechanism may need lubrication or is misaligned. | Ensure no obstructions are blocking the mechanism. Apply a silicone-based lubricant to moving parts if necessary. If issues persist, contact customer support. |
| Cushions appear flat or lose shape. | Normal wear and tear; lack of rotation. | Fluff and rotate cushions regularly. This helps maintain their shape and even out wear. |
Specifications
| Brand | VanAcc |
| Model | B0DKT7C84G |
| Type | Sofa Bed, L-Shape |
| Color | White (Boucle Upholstery) |
| Product Dimensions (D x W x H) | 57"D x 84"W x 36"H |
| Item Weight | 193 Pounds |
| Weight Limit | 600 Pounds |
| Seating Capacity | 3 |
| Seat Height | 18 Inches |
| Seat Depth | 52 Inches |
| Frame Material | Metal |
| Seat Fill Material | Foam, Wrapped Coils |
| Back Fill Material | Cotton |
| Assembly Required | Yes (Recommended 2 people) |
| Special Features | Pull-out bed, USB Charging Ports, Cup Holders, Hidden Storage, Removable Cushions |
Warranty and Support
The VanAcc Sofa Bed comes with a manufacturer warranty. For specific details regarding your warranty coverage, please refer to the documentation included with your purchase or contact VanAcc customer service.
If you encounter any issues during assembly or operation, or if you have questions about your product, a professional customer service team is available to assist you. Please refer to your purchase receipt or product packaging for contact information.
