ALLIMITY 43S19UHD

ALLIMITY Remote Control Instruction Manual

For Selecline TV Models (e.g., 43S19UHD, 50SL8, 32S18T2)

1. Introduction

This manual provides instructions for the ALLIMITY Remote Control, designed as a replacement or secondary remote for various Selecline TV models. It offers full functionality without requiring complex programming.

2. Compatibility

This remote control is compatible with a wide range of Selecline TV models. Please verify your TV model number against the list below to ensure compatibility. The model number is typically found on a label on the back of your television.

Compatible Selecline TV Models include:

  • 146371/58S19UHD
  • 894527/50SL8
  • 894527/50S18
  • 890919/40S18
  • 899635/3951810
  • 888100/39S17
  • 894528/65518
  • 6000710202/39S201B
  • 886817/LE-3918
  • 894527/50S18UHD
  • 146372/43S19UHD
  • 600104291/32S221B(V2)
  • 600082363/40S201B
  • 894526/24S17T2
  • 130112/32S18T2
  • 894528/65S18
  • 899635/39S1810
  • 600071202/395201B
  • 89963S/39S1810
  • 58S19UHD
Front view of the ALLIMITY remote control

Image 1: Front view of the ALLIMITY Remote Control. This image displays the ergonomic design and button layout of the remote control.

3. Setup

3.1 Battery Installation

  1. Locate the battery compartment on the back of the remote control.
  2. Slide the battery compartment cover downwards or press the latch and lift to open.
  3. Insert two AAA batteries (not included), ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
  4. Replace the battery compartment cover by sliding it back into place until it clicks securely.

No programming or additional setup is required. The remote is ready for use once batteries are installed.

Back view of the ALLIMITY remote control with battery compartment open

Image 2: Back view of the ALLIMITY Remote Control with the battery compartment open. This shows where to insert the AAA batteries.

4. Operating Instructions

The ALLIMITY Remote Control is designed to replicate the functions of your original Selecline TV remote. Point the remote directly at your TV's infrared receiver for optimal performance.

4.1 Key Functions

ButtonFunction
Power (Red Button)Turns the TV on or off.
0-9 (Number Buttons)Direct channel selection.
VOL +/-Adjusts the volume level.
CH +/-Changes the TV channel up or down.
MUTEMutes or unmutes the TV audio.
SOURCESelects input source (HDMI, AV, etc.).
MENUOpens the TV's main menu.
ENTERConfirms selections in menus.
EXITExits the current menu or function.
Navigation ArrowsNavigates through menus and options.
DISPLAYShows on-screen information.
ASPECTChanges the screen aspect ratio.
GUIDEAccesses the electronic program guide.
SUBTITLEToggles subtitles on/off.
TEXTAccesses Teletext functions.
Colored Buttons (Red, Green, Yellow, Blue)Functions vary depending on the TV model and current menu. Refer to your TV's manual for specific uses.

5. Maintenance

  • Cleaning: Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Battery Replacement: Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time with new ones of the same type (AAA).
  • Storage: If the remote will not be used for an extended period, remove the batteries to prevent leakage and damage.
  • Environment: Avoid exposing the remote to extreme temperatures, direct sunlight, or moisture.

6. Troubleshooting

ProblemSolution
Remote is not working.
  • Check if the batteries are inserted correctly with the correct polarity (+/-).
  • Replace old batteries with new ones.
  • Ensure there are no obstructions between the remote and the TV's infrared sensor.
  • Make sure you are pointing the remote directly at the TV.
Remote works intermittently.
  • Batteries may be low; replace them.
  • Ensure a clear line of sight to the TV.
  • Check for strong light sources (e.g., direct sunlight, fluorescent lights) that might interfere with the IR signal.
Some buttons do not respond.
  • This remote is designed to cover all functions of the original remote. If a specific button does not work, it might not be supported by your specific TV model or the function is not active in the current TV mode.
  • Ensure the remote is clean and there is no debris under the buttons.

7. Specifications

  • Brand: ALLIMITY
  • Model Name: 43S19UHD (Representative model for compatibility)
  • Connectivity Technology: Infrared (IR)
  • Number of Buttons: 20
  • Maximum Range: 10 Meters (approx. 33 feet)
  • Special Features: Ergonomic design
  • Power Source: 2 x AAA Batteries (not included)
  • Item Weight: 59 Grams

8. Warranty and Support

This product is covered by a standard return policy. For specific warranty details or support inquiries, please refer to the retailer's return policy or contact the seller directly through the platform where the purchase was made.

For further assistance, you may also consult the user manual of your specific Selecline TV model for detailed information on remote control functions and TV settings.

© 2026 ALLIMITY. All rights reserved.