1. Introduction
The Flashpoint R2 Nano Remote is a compact and advanced wireless flash trigger designed specifically for Leica cameras. It offers precise control over your flash units, enhancing your photographic capabilities with features like a responsive touchscreen interface, OLED display, and robust wireless communication.
This manual provides detailed instructions for setting up, operating, and maintaining your R2 Nano Remote to ensure optimal performance and longevity.
2. Setup
2.1 Package Contents
Before proceeding, please verify that all items are present in your package:
- Flashpoint R2 Nano Remote
- USB-C Charging Cable
- User Manual (this document)
2.2 Charging the Device
The R2 Nano Remote features a built-in rechargeable lithium battery. For first use, or if the battery is low, charge the device using the provided USB-C cable.
- Connect the USB-C cable to the charging port on the R2 Nano Remote.
- Connect the other end of the USB-C cable to a compatible USB power adapter (not included) or a computer's USB port.
- The device will fully charge from 0% to 100% in approximately 2 hours. The battery indicator on the OLED screen will show charging status.

Figure 2.2.1: The R2 Nano Remote connected via its USB-C port for charging. The device is equipped with a built-in rechargeable lithium battery, allowing for quick and convenient power replenishment.
2.3 Mounting to Camera Hotshoe
The R2 Nano Remote is designed with an easy-mounting, durable metal hotshoe for secure attachment to your Leica camera.
- Ensure your camera is powered off.
- Slide the R2 Nano Remote's hotshoe into your camera's hotshoe mount until it clicks into place.
- To detach, press the installing/detaching button located near the hotshoe and slide the remote off.

Figure 2.3.1: The R2 Nano Remote securely mounted on a camera's hotshoe. Its robust metal hotshoe ensures a stable connection, allowing photographers to focus on capturing their shots without concerns about setup.
2.4 Powering On/Off
To power on the R2 Nano Remote, press and hold the Power Switch button located on the side of the device until the OLED screen illuminates. To power off, press and hold the same button until the screen turns off.
4. Maintenance
4.1 Cleaning
To maintain the appearance and functionality of your R2 Nano Remote:
- Wipe the device with a soft, dry cloth.
- For stubborn marks, slightly dampen the cloth with water. Do not use harsh chemicals, cleaning solvents, or strong detergents.
- Keep the hotshoe contacts clean and free of debris.
4.2 Storage
When not in use, store the R2 Nano Remote in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, ensure the battery is charged to approximately 50% to prolong its lifespan.
4.3 Battery Care
The R2 Nano Remote contains a built-in rechargeable battery. To maximize battery life:
- Avoid fully discharging the battery frequently.
- Recharge the battery regularly, even if the device is not used often.
- Do not expose the device to temperatures below -10°C (14°F) or above 45°C (113°F).
7. Warranty & Support
Specific warranty terms and conditions for the Flashpoint R2 Nano Remote may vary by region and retailer. Please retain your proof of purchase. For detailed warranty information, including coverage period and claims process, please refer to the documentation provided with your purchase or visit the official Flashpoint website.
7.2 Customer Support
For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Flashpoint customer support. You can find contact information and additional resources on the official Flashpoint website:
Visit the Flashpoint Store on Amazon
Please have your product model (R2 Nano Remote) and ASIN (B0DKPFCXKS) ready when contacting support.