Xpoovv G200 Magnetic Bluetooth Speaker Instruction Manual

1. Introduction

Thank you for choosing the Xpoovv G200 Magnetic Bluetooth Speaker. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and retain it for future reference.

Figure 1: Xpoovv G200 Magnetic Bluetooth Speaker

2. Package Contents

Ensure all items listed below are present in your package:

• 1 x Xpoovv G200 Wireless Speaker
• 1 x Magnetic Ring
• 1 x USB Charging Cable
• 1 x User Manual (this document)

Figure 2: Package Contents

3. Setup

3.1 Charging the Speaker

Before initial use, fully charge the speaker. Connect the provided USB charging cable to the speaker's USB-C port and the other end to a compatible USB power adapter (not included).

• The LED indicator will show charging status (specific color/behavior not detailed in product data, assume standard charging indication).
• A full charge typically takes approximately 2-3 hours.

3.2 Power On/Off

• To Power On: Press and hold the power button (often indicated by a smiley face icon) for a few seconds until the RGB lights illuminate and an audible prompt is heard.
• To Power Off: Press and hold the power button again for a few seconds until the RGB lights turn off and an audible prompt is heard.

3.3 Bluetooth Pairing

The Xpoovv G200 uses Bluetooth 5.3 for stable connectivity.

1. Ensure the speaker is powered on and in pairing mode (LED indicator may flash, refer to specific product behavior).
2. On your device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
3. Select "G200" from the list of available devices to connect.
4. Once connected, the speaker will provide an audible confirmation, and the LED indicator will change (e.g., solid blue).

3.4 True Wireless Stereo (TWS) Pairing (for two speakers)

To achieve stereo sound, you can pair two G200 speakers together:

1. Ensure both G200 speakers are powered on and not connected to any other Bluetooth device.
2. Double-click the power button on one of the speakers. It will enter TWS pairing mode and attempt to connect to the other G200 speaker.
3. Once successfully paired, both speakers will provide an audible confirmation, and their LED indicators will synchronize.
4. Now, connect your device to one of the paired G200 speakers via Bluetooth as described in Section 3.3. Both speakers will play audio in stereo.

Figure 3: True Wireless Stereo Pairing

4. Operating Instructions

4.1 Basic Controls

• Play/Pause: Short press the power button.
• Volume Up/Down: Control volume directly from your connected device.
• Next/Previous Track: Control track selection directly from your connected device.

4.2 RGB Light Effects

The speaker features colorful RGB light effects. The lights typically cycle automatically. Specific controls for changing light modes are not detailed in the product information, suggesting automatic cycling.

Figure 4: Speaker with RGB Lighting

4.3 Magnetic Mounting & Phone Holder

The G200 speaker has built-in magnets for attachment to metal surfaces and can function as a phone holder.

• Direct Magnetic Attachment: Attach the speaker directly to any metal surface (e.g., refrigerator, metal table, bike frame).
• Using the Magnetic Ring: For non-metal surfaces or devices without built-in magnets, use the included metal ring. Peel off the adhesive backing and firmly attach the ring to your desired surface (e.g., phone case, wall, cabinet). The speaker can then magnetically attach to this ring.
• Phone Holder Function: When attached to the back of a compatible phone case, the speaker can act as a kickstand, allowing for hands-free viewing of videos or video calls.

Figure 5: Speaker functioning as a phone holder

Figure 6: Magnetic attachment to various surfaces

4.4 Official Product Video

Video 1: Official product video demonstrating the features and usage of the Xpoovv G200 Magnetic Bluetooth Speaker.

5. Maintenance

• Cleaning: Use a soft, dry cloth to clean the speaker. Avoid using harsh chemicals or abrasive materials.
• Water Resistance: The speaker is IPX5 water-resistant, meaning it can withstand splashes and light rain. Do not submerge the speaker in water. Ensure the charging port cover is securely closed when exposed to moisture.
• Battery Care: To prolong battery life, avoid fully discharging the speaker frequently. Store in a cool, dry place when not in use for extended periods.

6. Troubleshooting

• Speaker not turning on: Ensure the battery is charged. Connect to a power source and try again.
• Unable to pair via Bluetooth: Ensure the speaker is in pairing mode and not connected to another device. Turn off and on your device's Bluetooth, then try pairing again. Move closer to the speaker.
• No sound: Check the volume level on both the speaker and your connected device. Ensure the speaker is properly paired.
• Poor sound quality: Ensure the speaker is within Bluetooth range of your device. Check for obstructions between the speaker and device.
• Battery drains quickly when powered off: This may indicate a potential battery issue. Ensure the speaker is fully powered off (not just in standby) when not in use. If the issue persists, contact customer support.

7. Specifications

8. Warranty and Support

The Xpoovv G200 Magnetic Bluetooth Speaker comes with a standard manufacturer's warranty. For specific warranty details, claims, or technical support, please refer to the product packaging or contact the seller directly through your purchase platform.

For further assistance, please visit the official Xpoovv website or contact their customer service department.