1. Introduction
The AprilAire 413 MERV 13 Replacement Filter is designed to maintain optimal indoor air quality by effectively capturing airborne contaminants. This filter utilizes patented AprilAire Self-Seal™ Technology to ensure a tight fit within your AprilAire Whole House Air Purifier system. Regular replacement of this filter is crucial for the continuous performance of your air purification system.

The AprilAire 413 MERV 13 Replacement Filter, designed for whole-house air purifiers.
2. Compatibility
The AprilAire 413 Replacement Filter is compatible with the following AprilAire Whole House Air Purifier models:
- AprilAire Models: 1410, 1610, 2410, 2416, 3410, 4400
- Also compatible with Models 2400 and 2140, provided the Upgrade Kit, part #1413, has been installed.
- UV14, UV24

An image displaying the nominal filter size (16" x 25" x 4") and a list of compatible AprilAire air purifier models.
3. Setup & Installation
Follow these general steps to replace your AprilAire 413 filter. Always refer to your specific AprilAire Air Purifier model's manual for detailed instructions.
- Power Off: Turn off your HVAC system at the thermostat and the main power switch to prevent accidental operation during filter replacement.
- Locate Filter Access: Open the access door or panel on your AprilAire Whole House Air Purifier unit where the filter is housed.
- Remove Old Filter: Carefully slide out the old filter. Note the direction of the airflow arrow on the old filter for correct installation of the new one.
- Insert New Filter: Unpack the new AprilAire 413 filter. Ensure the airflow arrow on the new filter points in the same direction as the old filter, typically towards the furnace or air handler. Slide the new filter completely into the unit.
- Close Access: Securely close the access door or panel.
- Restore Power: Turn the power back on to your HVAC system.
Official video demonstrating the features and benefits of the genuine AprilAire 413 Replacement Filter, including installation.
A seller's review showcasing the genuine AprilAire 413 Replacement Filter and its installation process.

A close-up view of an AprilAire 413 filter being inserted into an air purifier unit.
4. Operating Principles
The AprilAire 413 filter features a MERV 13 rating, indicating its high efficiency in capturing a wide range of airborne particles. This advanced filtration helps to improve indoor air quality by removing:
- Up to 97% of common allergens such as pollen, mold spores, pet dander, dust, and dust mites.
- Up to 92% of viruses.
- 15% more harmful particles compared to minimum MERV 13 requirements, based on ASHRAE 52.2 2017 testing methods.
This filtration capability contributes to a healthier home environment and can reduce the frequency of cleaning by trapping contaminants before they settle.

An illustration detailing the AprilAire 413's MERV 13 rating and its effectiveness in removing dust, mold, common allergens, and viruses.

Key benefits of using genuine AprilAire air filters, including advanced purification, energy efficiency, and long filter life.
5. Maintenance
To ensure peak performance of your AprilAire Air Purifier, the 413 filter should be changed at least once a year. The filter is designed for a 12-month lifespan under normal operating conditions. Your Air Cleaner Control may also indicate when it is time for a filter change.
Using only genuine AprilAire SelfSeal #413 filters is recommended to maintain the best performance and airtight seal of your air cleaner.

A person demonstrating the replacement of an AprilAire 413 filter, emphasizing its 12-month lifespan.

A smartphone screen showing a filter replacement reminder from the AprilAire Healthy Air App.
6. Troubleshooting
If you experience issues after replacing your filter, consider the following:
- Reduced Airflow: Ensure the filter is installed with the airflow arrow pointing in the correct direction. A backward filter can restrict airflow.
- Filter Not Fitting: Verify you have the correct AprilAire 413 model filter. Check for any obstructions in the filter slot.
- Persistent Air Quality Issues: If air quality does not improve after filter replacement, consult your HVAC professional or AprilAire support.
For further assistance, please refer to the Support section of this manual.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | 413 |
| MERV Rating | 13 |
| Nominal Dimensions (L x W x Th) | 16" x 25" x 4" |
| Material | Synthetic Fiber |
| Filter Life | Up to 12 months |
| Filter Mounting Type | Slide In |
| Included Components | (1) 413 Filter Media |
8. Warranty Information
The AprilAire 413 Replacement Filter itself does not carry a specific warranty. However, AprilAire offers a 10-year Clean-Coil Commitment for their Air Purifiers. This commitment applies to new HVAC system units with an AprilAire Whole-House Air Purifier installed no more than 6 months after HVAC system installation. The unit must be properly maintained with air filters changed according to the recommended service schedule. Should your new indoor air conditioner coil require professional cleaning within its first 10 years of use, AprilAire will pay $100 toward a cleaning by an HVAC contractor.
9. Support
For technical assistance, product inquiries, or further information, please contact the AprilAire support team:
- Phone: 800.334.6011
- Hours: Monday - Friday, 7:00 A.M. - 5:00 P.M. CT
You can also download the AprilAire Healthy Air App (available on App Store and Google Play) to schedule reminders for filter replacement and learn more about maintaining indoor air quality.

Contact details for the AprilAire in-house USA expert support team.
Visit the AprilAire Store for more products and information.