Victrola Journey+ Bluetooth Suitcase Record Player Instruction Manual

1. Introduction

Thank you for purchasing the Victrola Journey+ Bluetooth Suitcase Record Player. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and retain it for future reference.

2. Package Contents

Ensure all items are present in the package:

• Victrola Journey+ Bluetooth Suitcase Record Player
• Power Adapter
• Instruction Manual (this document)

3. Product Components

Familiarize yourself with the main components of your record player.

3.1 Front View

Figure 1: Front view of the Victrola Journey+ Record Player in its closed, portable suitcase form.

3.2 Top Panel Controls

Figure 2: Top panel with turntable, tonearm, and control interface.

• Turntable Platter: Where records are placed.
• Tonearm: Holds the stylus (needle) for playing records.
• Tonearm Lever: Lifts and lowers the tonearm.
• Speed Selector: Adjusts playback speed (33 1/3, 45, 78 RPM).
• Auto Stop Switch: Enables or disables automatic stopping of the platter when a record finishes.
• Function Knob: Selects input source (BT for Bluetooth, Phono for vinyl, Line In).
• Power/Volume Knob: Turns the unit on/off and adjusts volume.
• Headphone Jack: For private listening.

3.3 Rear Panel Connections

Figure 3: Rear panel with RCA output and power input.

• RCA Output Jacks: Connect to external speakers or an amplifier.
• DC Power Input: Connects to the included power adapter.

4. Initial Setup

1. Unpack: Carefully remove the record player from its packaging.
2. Power Connection: Connect the power adapter to the DC Power Input on the rear of the unit and plug it into a wall outlet.
3. Stylus Protection: Remove the clear plastic stylus protector from the needle before use.
4. Tonearm Lock: Release the tonearm lock to allow the tonearm to move freely.

5. Operating Instructions

5.1 Playing a Vinyl Record

1. Power On: Turn the Power/Volume knob clockwise to power on the unit.
2. Select Phono Mode: Turn the Function knob to 'Phono'.
3. Place Record: Place a vinyl record on the turntable platter.
4. Select Speed: Set the Speed Selector to match the record's RPM (33 1/3, 45, or 78). For 45 RPM records, use the included 45 RPM adapter.
5. Lift Tonearm: Use the Tonearm Lever to gently lift the tonearm.
6. Position Tonearm: Manually move the tonearm over the desired track on the record.
7. Lower Tonearm: Use the Tonearm Lever to gently lower the tonearm onto the record. Playback will begin.
8. Adjust Volume: Adjust the volume using the Power/Volume knob.
9. Auto Stop: If the Auto Stop switch is ON, the platter will stop spinning when the record finishes. If OFF, it will continue to spin.
10. End Playback: When finished, use the Tonearm Lever to lift the tonearm, return it to its rest, and secure it with the tonearm lock. Turn the Power/Volume knob counter-clockwise to power off.

5.2 Bluetooth Streaming

1. Power On: Turn the Power/Volume knob clockwise to power on the unit.
2. Select BT Mode: Turn the Function knob to 'BT' (Bluetooth). The indicator light will flash.
3. Pair Device: On your Bluetooth-enabled device (e.g., smartphone), search for 'Victrola Journey+' in the Bluetooth settings and select it to pair.
4. Start Playback: Once paired, the indicator light will stop flashing. You can now stream audio from your device to the record player's built-in speakers.
5. Adjust Volume: Control volume using both your device and the record player's Power/Volume knob.

5.3 Line-In Connection

1. Power On: Turn the Power/Volume knob clockwise to power on the unit.
2. Select Line In Mode: Turn the Function knob to 'Line In'.
3. Connect Device: Connect an external audio device (e.g., CD player) to the 'Line In' jack using a 3.5mm audio cable (not included).
4. Start Playback: Begin playback on your external device.
5. Adjust Volume: Control volume using both your external device and the record player's Power/Volume knob.

5.4 Headphone Use

For private listening, plug your headphones into the Headphone Jack on the top panel. The built-in speakers will automatically mute.

5.5 Video Demonstrations

Watch these videos for visual guidance on operating your Victrola Journey+ Record Player.

6. Care and Maintenance

• Cleaning the Stylus: Gently clean the stylus periodically with a soft brush, brushing from back to front.
• Cleaning the Unit: Wipe the exterior with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Record Care: Keep records clean and free of dust to ensure optimal sound quality and prolong stylus life.
• Storage: When not in use, ensure the tonearm is locked in place and the unit is closed to protect components from dust and damage.

7. Troubleshooting

8. Specifications

• Product Dimensions: 7.17 x 12.83 x 16.5 inches
• Item Weight: 6.78 pounds
• Model Number: VSC-400SB-WSL
• Brand: Victrola
• Maximum Rotational Speed: 78 RPM
• Included Components: Bluetooth Record Player
• Special Feature: Bluetooth Connectivity
• Material: Plastic
• Style: Record Player
• Compatible Devices: Headphone, Smartphone, Speaker
• Motor Type: AC Motor

9. Warranty and Support

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Victrola website. Keep your purchase receipt as proof of purchase for warranty claims.