1. Introduction and Overview
The JBL 12-inch Ultra Premium Subwoofer, model JBLSUBAX122AM, is engineered to deliver powerful and clear bass for your car audio system. This integrated unit combines a 150Wrms amplifier, a 12-inch subwoofer, and Slipstream Port Technology within a robust MDF wood enclosure. The design focuses on eliminating turbulence and noise, ensuring articulate bass reproduction. A remote control is included for convenient bass volume adjustment from the driver's seat.
Image 1: Side view of the JBL 12-inch Ultra Premium Subwoofer, showcasing its robust enclosure and design.
2. What's in the Box
Please check the contents of the package to ensure all components are present:
- 1 x Powered subwoofer
- 1 x Bass volume remote control
- 2 x High-level input wiring harness
- 1 x 25A fuse
3. Setup and Installation
Proper installation is crucial for optimal performance and safety. It is recommended to have this subwoofer installed by a qualified car audio professional. Ensure the vehicle's power system can support the subwoofer's requirements.
3.1 Mounting
This subwoofer is designed for car mount applications. Securely mount the enclosure in a suitable location within your vehicle, such as the trunk or cargo area, ensuring it does not obstruct safety features or passenger movement. Use appropriate mounting hardware (not included unless specified) to prevent movement during vehicle operation.
3.2 Wiring
Connect the provided high-level input wiring harness to your car's audio system. Ensure correct polarity for all connections. Install the 25A fuse in the appropriate location within the power circuit to protect the unit and your vehicle's electrical system. Refer to your vehicle's service manual or consult a professional for specific wiring diagrams and safety precautions.
Image 2: Rear view of the JBL 12-inch Ultra Premium Subwoofer, highlighting the terminal block for wiring connections.
4. Operating Instructions
Once installed and connected, the subwoofer will power on with your car's audio system. The primary control for the subwoofer is the included bass volume remote control.
4.1 Bass Volume Remote Control
Use the remote control to adjust the bass output level to your preference. This allows for on-the-fly adjustments without needing to access the subwoofer unit directly. Position the remote control in a convenient location within the driver's reach.
4.2 System Integration
The subwoofer works in conjunction with your car's head unit and other speakers. Adjust the bass settings on your head unit to complement the subwoofer's output for a balanced sound profile. Compatible audio sources include smartphones, MP3 players, laptops, and tablets when connected to your car's main audio system.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your subwoofer.
5.1 Cleaning
Use a soft, dry cloth to clean the exterior of the subwoofer enclosure. Avoid using abrasive cleaners or solvents, which can damage the finish. Do not allow liquids to enter the unit.
5.2 Connections
Periodically check all wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to poor performance or damage.
5.3 Environmental Conditions
This subwoofer is not waterproof. Avoid exposing the unit to excessive moisture, direct sunlight for prolonged periods, or extreme temperatures. Ensure adequate ventilation around the enclosure to prevent overheating.
6. Troubleshooting
If you experience issues with your JBL subwoofer, refer to the following common troubleshooting steps:
6.1 No Sound
- Verify that the subwoofer is receiving power. Check the 25A fuse for continuity.
- Ensure all audio input connections are secure and correctly wired.
- Confirm that the car audio system's head unit is powered on and outputting audio.
- Check the bass volume remote control setting; ensure it is not set to minimum.
6.2 Distorted or Weak Bass
- Check the input signal level from your head unit. Too high a signal can cause distortion, while too low can result in weak bass.
- Inspect speaker wires for damage or short circuits.
- Ensure the subwoofer enclosure is securely mounted and not vibrating excessively against other surfaces.
- Adjust the bass boost feature on the subwoofer or head unit if available, but avoid over-boosting which can lead to distortion.
If problems persist after performing these checks, contact JBL customer support or a qualified service technician.
7. Specifications
| Feature | Specification |
|---|---|
| Brand | JBL |
| Model Name | JBLSUBAX122AM |
| Speaker Type | Subwoofer |
| Speaker Size | 12 Inches |
| Woofer Diameter | 12 Inches |
| Audio Driver Type | Dynamic Driver |
| Speaker Maximum Output Power | 150 Watts |
| Material | MDF Wood, Subwoofer |
| Color | Black |
| Special Feature | Bass Boost |
| Control Method | Remote |
| Connectivity Technology | Wired |
| Power Source | Corded Electric |
| Audio Output Mode | Stereo |
| Mounting Type | Car Mount |
| Specific Uses For Product | Car audio systems |
| Product Dimensions | 7.6 x 12.99 x 12.99 inches |
| Item Weight | 31 pounds |
| Is Waterproof | False |
| Warranty Type | Limited |
| UPC | 753359665931 |
Image 3: Angled view of the JBL 12-inch Ultra Premium Subwoofer, showing its overall form factor.
8. Warranty and Support
The JBL 12-inch Ultra Premium Subwoofer comes with a 1-Year Manufacturer Limited Warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty validation.
For warranty claims, technical assistance, or service inquiries, please contact JBL customer support. You can typically find contact information on the official JBL website or through your authorized dealer.
Online Resources: Visit the official JBL website for additional product information, frequently asked questions (FAQs), and support resources.
