Introduction
This manual provides detailed instructions for the VINABTY AH81-15183A replacement infrared remote control. It is designed to be a direct replacement for your original Samsung Soundbar remote, offering easy setup and reliable operation without the need for programming. Please read this manual thoroughly to ensure proper use and maintenance of your remote control.
Product Overview
The VINABTY AH81-15183A remote control is an ergonomic and lightweight device, designed for comfortable handling and intuitive operation. It features clearly labeled buttons for controlling various functions of your compatible Samsung Soundbar.
Image 1: Front view of the VINABTY AH81-15183A remote control, showing all buttons and their labels.
Setup
1. Battery Installation
The remote control requires two AAA (R03) 1.5V batteries. Ensure correct polarity when inserting the batteries.
- Locate the battery compartment on the back of the remote control.
- Slide the battery compartment cover downwards to open it.
- Insert two AAA (R03) 1.5V batteries, matching the (+) and (-) terminals as indicated inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Image 2: Back view of the remote control with the battery compartment open, illustrating the correct placement for two AAA batteries.
2. Initial Use
This remote control is designed to work immediately with compatible Samsung Soundbar models without any programming or configuration. Simply insert the batteries and point the remote towards your soundbar to begin operation.
Operating Instructions
The remote control features a range of buttons for controlling your Samsung Soundbar. Below is a general guide to common button functions:
- Power Button (⏻): Turns the soundbar on or off.
- Source/Input Button (↷): Selects the input source (e.g., HDMI, Optical, Bluetooth).
- Mute Button (🔇): Mutes or unmutes the sound.
- Volume Up/Down (+/-): Adjusts the main volume level.
- Play/Pause Button (⏸): Controls media playback (play, pause).
- Sound Mode Button: Cycles through available sound modes (e.g., Standard, Surround, Game).
- Info Button (i): Displays information about the current soundbar status or input.
- Woofer Button: Adjusts the subwoofer level.
- Pair Button (⚛ PAIR): Initiates Bluetooth pairing mode for connecting devices.
- Tone Control Button: Accesses settings for adjusting treble and bass.
- CH Level Button: Adjusts individual channel levels.
- Settings Button (⚙): Opens the soundbar's settings menu.
Note: Specific button functions may vary slightly depending on your Samsung Soundbar model. Refer to your soundbar's original manual for detailed functionality.
Maintenance
Battery Replacement
Replace the batteries when the remote control's response becomes sluggish or stops working. Always replace both batteries at the same time with new AAA (R03) 1.5V batteries. Do not mix old and new batteries, or different types of batteries.
Cleaning
To clean the remote control, gently wipe it with a soft, dry cloth. Do not use liquid cleaners, abrasive pads, or chemical solvents, as these may damage the remote's surface or internal components.
Troubleshooting
- Remote not responding:
- Check if the batteries are inserted correctly with the correct polarity.
- Replace the batteries with new ones.
- Ensure there are no obstructions between the remote control and the soundbar's infrared receiver.
- Make sure the remote is pointed directly at the soundbar.
- Short operating range:
- Replace the batteries. Low battery power can reduce the remote's effective range.
- Ensure the remote is within the maximum operating range of 10 meters (approximately 33 feet).
If you continue to experience issues, please refer to the Support section for assistance.
Specifications
| Brand | VINABTY |
| Model Name | AH81-15183A |
| Connectivity Technology | Infrared |
| Compatible Devices | Samsung Soundbar |
| Maximum Range | 10 meters (approx. 33 feet) |
| Number of Buttons | 7 (functional buttons) |
| Dimensions (L x W x H) | 18 cm x 4 cm x 1.5 cm |
| Special Features | Ergonomic, No programming required |
| Power Source | 2 x AAA (R03) 1.5V Batteries |
Compatible Models
This remote control is compatible with the following Samsung Soundbar models:
- TM2260S
- AH81-15183A
- HW-S800D
- HW-S800B
- HW-S800B/ZS
- HW-S800B/ZW
- HW-S800B/ZX
- HW-S810B/XE
- HW-S810B/ZG
- HW-S800D/XY
- HW-S800B/ZL
- HW-S800B/ZN
- HW-S800B/ZP
- HW-S800B/EN
- HW-S800B/RU
- HW-S800B/SA
- HW-S800B/TK
- HW-S800B/XA
- HW-S800B/XM
- HW-S800B/XN
- HW-S800B/XT
- HW-S800B/XU
- HW-S800B/XV
- HW-S800B/XY
- HW-S800B/ZC
- HW-S800B/ZD
- HW-S800B/ZF
- HW-S800B/ZK
- HW-W80CB
- HW-S810B
- HWS800B
- HWS80CB
- HWS810B
Note: This list may not be exhaustive. If your model is not listed, please contact customer support for compatibility verification.
Support
If you encounter any issues with your VINABTY AH81-15183A remote control or have questions regarding its compatibility, please contact the seller or manufacturer's customer support. Providing your product model number (AH81-15183A) and a detailed description of the issue will help expedite assistance.
