RAWM SH01PRO 8K Wireless Gaming Mouse User Manual

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your RAWM SH01PRO 8K Wireless Gaming Mouse. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

2. Package Contents

Verify that all items listed below are present in your product package:

• RAWM SH01PRO Wireless Gaming Mouse
• 8K Wireless Dongle
• 1K USB Receiver
• PTFE Feet (pre-installed or spare set)
• Anti-slip Grip Tape
• Type-C to USB-A Charging/Data Cable
• User Manual (this document)

3. Product Overview

The RAWM SH01PRO is a lightweight gaming mouse designed for precision and versatility. It features a PAW3950 optical sensor, multiple connectivity options, and customizable components.

4. Setup

4.1 Initial Charging

Before first use, connect the mouse to your computer using the provided Type-C cable. The mouse can be used while charging.

4.2 Connecting via 2.4G Wireless (8K Dongle)

1. Insert the 8K wireless dongle into an available USB port on your computer.
2. Turn on the mouse using the switch on the bottom.
3. The mouse should automatically connect. If not, refer to the software section for pairing instructions.

4.3 Connecting via 2.4G Wireless (1K USB Receiver)

1. Insert the 1K USB receiver into an available USB port on your computer.
2. Turn on the mouse using the switch on the bottom.
3. The mouse should automatically connect. This receiver is suitable for general use and portability.

4.4 Connecting via Bluetooth 5.3

1. Turn on the mouse and switch it to Bluetooth mode (refer to the switch on the bottom of the mouse).
2. On your computer or device, navigate to Bluetooth settings and search for new devices.
3. Select "RAWM SH01PRO" from the list of available devices to pair.
4. The mouse can connect to up to 3 devices simultaneously via Bluetooth.

4.5 Wired Connection

Connect the mouse directly to your computer using the provided Type-C cable. The mouse will operate in wired mode and charge simultaneously.

5. Operating Instructions

5.1 DPI Adjustment

The SH01PRO features a PAW3950 optical sensor with up to 30,000 DPI. You can adjust DPI settings directly on the mouse using the dedicated DPI switch on the bottom, or through the RAWM software for more granular control.

• On-mouse DPI Control: Default settings include 4 DPI stages (400/800/1600/3200).
• Software DPI Adjustment: Use the RAWM software to set X/Y DPI values separately and adjust DPI in 1-DPI steps from 50 to 30,000.

5.2 Polling Rate Adjustment

The mouse supports an 8K Hz polling rate with the 8K dongle, providing ultra-low latency. Polling rate can be adjusted via the RAWM software (see Figure 5.2).

5.3 Customizing Buttons (RAWM Software)

The RAWM SH01PRO features 7 programmable buttons. Use the RAWM software to customize key mappings, macros, and functions. Four onboard configurations can be saved directly to the mouse's memory.

• R-plus Key: Assign any key as an R-plus key to activate additional secondary mappings when pressed.

5.4 Advanced Settings (RAWM Software)

The RAWM software provides advanced customization options:

• Performance Modes: Select between Office, LP (Low Power), HP (High Performance), Glass Mode, and Gaming+ Mode.
• Glass Mode: Enables tracking on glass surfaces.
• Gaming+ Mode: Optimized for gaming with 20,000+ FPS in static conditions.
• Lift-Off Distance (LOD): Adjust the height at which the mouse becomes unresponsive when lifted.
• Sleep Time: Configure idle time before the mouse enters sleep mode to conserve power.
• Angle Tuning: Adjust the angle between the mouse's horizontal direction and the pointer's horizontal direction.
• Key Delay: Adjust key delay time for improved key stability.

5.5 Cross-Computer Technology

The SH01PRO supports switching between multiple devices (e.g., office computer, laptop, Mac) using its dual receivers (1K and 8K) and Bluetooth 5.3. This allows for seamless transitions between different workstations.

5.6 Hot-Swappable Switches

The mouse features a hot-swappable switch design, allowing users to change the micro-switches to suit different tactile preferences. It comes equipped with HUANO Green and White Dot Switches, rated for 100 million clicks.

6. Maintenance

To ensure the longevity and optimal performance of your RAWM SH01PRO mouse, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to clean the mouse surface. For stubborn dirt, slightly dampen the cloth with water. Avoid using harsh chemicals or abrasive materials.
• Sensor Care: Keep the optical sensor on the bottom of the mouse clean and free from dust or debris to ensure accurate tracking.
• Storage: When not in use for extended periods, store the mouse in a dry, cool place away from direct sunlight.
• Battery Care: Avoid fully discharging the battery frequently. Charge the mouse when the battery indicator suggests low power.

7. Troubleshooting

If you encounter issues with your RAWM SH01PRO mouse, refer to the following common solutions:

8. Specifications

9. Warranty and Support

For warranty information and technical support, please refer to the official RAWM website or contact customer service through your purchase platform. Keep your proof of purchase for warranty claims.