FEZIBO 55'' x 24'' Height Adjustable Electric Standing Desk User Manual

Introduction

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your FEZIBO 55'' x 24'' Height Adjustable Electric Standing Desk. Please read this manual thoroughly before assembly and use to ensure proper function and safety.

Safety Information

• Ensure all components are present and undamaged before assembly.
• Keep children and pets away from the desk during operation.
• Do not overload the desk. Refer to specifications for weight limits.
• Ensure the power cord is not pinched or damaged.
• Only use the provided power adapter.
• Avoid placing liquids directly on the desk surface without protective coasters.
• The anti-collision system is designed to prevent damage, but caution should still be exercised during height adjustments.

Package Contents

Verify that all the following components are included in your package:

• Desk Top (55'' x 24'')
• Electric Lifting Columns (Legs)
• Foot Pads (4)
• Control Panel
• Power Adapter and Cable
• Double Drawer Unit
• Headphone Hooks (2)
• Assembly Tools
• Instruction Manual

Setup and Assembly

Follow these steps to assemble your FEZIBO electric standing desk. It is recommended to have two people for assembly.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
2. Attach Lifting Columns: Secure the electric lifting columns to the underside of the desk top using the provided screws and tools. Ensure they are aligned correctly.
3. Install Foot Pads: Attach the four height-adjustable foot pads to the bottom of the lifting columns. These can be adjusted to level the desk on uneven floors.
4. Mount Control Panel: Secure the control panel to the underside of the desk top in an easily accessible location.
5. Connect Wiring: Connect the motor cables from the lifting columns and the control panel cable to the control box. Then, connect the power adapter to the control box and plug it into a wall outlet.
6. Install Double Drawer Unit: Position and secure the double drawer unit onto the desk top.
7. Attach Hooks: Install the two headphone hooks to the desired locations on the desk frame.

Image: Fully assembled FEZIBO electric standing desk with a monitor riser, two drawers, and accessories.

Image: Diagram showing the product dimensions: 55 inches width, 24 inches depth, and adjustable height from 28.3 to 45 inches (desk surface to floor).

Operating Instructions

Height Adjustment

The desk's height can be adjusted electrically between 27.36 inches and 46.06 inches. The motor operates with low noise, typically under 50 dB.

• Press the UP (^) button to raise the desk.
• Press the DOWN (v) button to lower the desk.
• Release the button at your desired height.

Memory Height Settings

The control panel features 3 programmable memory height buttons to save your preferred sitting and standing positions.

1. Adjust the desk to your desired height using the UP or DOWN buttons.
2. Press one of the memory buttons (1, 2, or 3) until you hear a beep or see a confirmation on the display (if available). The height is now saved.
3. To recall a saved height, simply press the corresponding memory button. The desk will automatically move to the programmed height.

Image: Close-up of the desk's control panel, showing the Up/Down arrows and memory height setting buttons (1, 2).

Anti-Collision Technology

The desk is equipped with an anti-collision system. If the desk encounters an obstacle during height adjustment, it will automatically reverse its movement by approximately 2 cm to prevent damage or injury.

Image: Illustration demonstrating the anti-collision technology, showing the desk reversing when an obstacle is detected during downward movement.

Reset Procedure

If the desk is not functioning correctly or needs to be recalibrated, perform a reset:

• Press and hold the DOWN (v) button for 5 seconds until the desk reaches its lowest position and slightly rebounds. This indicates a successful reset.

Drawer and Hook Usage

• The integrated double drawers provide convenient storage for small office supplies.
• The included hooks can be used to hang headphones, bags, or other accessories.

Image: Detailed view of the desk's storage features, including two pull-out drawers and a central open storage cubicle.

Maintenance

• Cleaning: Wipe the desk surface with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals.
• Inspection: Periodically check all screws and connections to ensure they are tight.
• Cable Management: Ensure cables are neatly managed and do not interfere with the desk's movement.

Troubleshooting

Specifications

• Brand: FEZIBO
• Model: B0DKFJRCGY
• Product Dimensions: 24"D x 55"W x 27"H (minimum height)
• Height Adjustment Range: 27.36'' - 46.06''
• Color: Light Rustic (Top), White (Base)
• Base Material: Alloy Steel
• Top Material Type: Wood
• Number of Drawers: 2
• Special Features: Electric Height Adjustable, Double Drawer, Anti-Collision Technology, Memory Height Settings, Headphone Hooks
• Noise Level: Under 50 dB during operation
• Assembly Required: Yes

Warranty and Support

This FEZIBO product comes with a Limited Warranty. For specific warranty terms and conditions, please refer to the warranty card included in your package or contact FEZIBO customer support.

For technical assistance, troubleshooting, or parts replacement, please visit the official FEZIBO website or contact their customer service department. When contacting support, please have your product model (B0DKFJRCGY) and purchase date available.

You can visit the FEZIBO Store for more information: FEZIBO Store