1. Introduction and Overview
Thank you for choosing the Lenovo L24i-4A monitor. This 23.8-inch Full HD (1920x1080) IPS display offers a 100Hz refresh rate and a rapid 1ms MPRT response time, providing a smooth visual experience. It features AMD FreeSync technology, 99% sRGB color gamut, and integrated 3W x 2 speakers. Connectivity options include HDMI 1.4 and VGA ports. The monitor is designed for comfort with anti-glare properties, Eyesafe 2.0 certification for low blue light, and tilt adjustability.
Figure 1.1: Front view of the Lenovo L24i-4A monitor.
Figure 1.2: Key features of the Lenovo L24i-4A monitor.
2. Setup Instructions
2.1 Unpacking the Monitor
Carefully remove all components from the packaging. Ensure all items listed in the 'What's in the Box' section are present. Retain the packaging for future transport or service needs.
2.2 Assembling the Stand
- Place the monitor face down on a soft, clean surface to prevent scratches.
- Attach the stand base to the stand neck. Secure it with the captive screw, typically hand-tightened.
- Align the assembled stand with the mounting slot on the back of the monitor. Insert and secure the stand until it clicks into place or is fastened with screws as indicated in the quick setup guide.
Figure 2.1: Lenovo L24i-4A monitor with stand.
2.3 Connecting Cables
Connect the necessary cables to the monitor and your computer:
- Power Cable: Connect one end of the power cable to the monitor's power input and the other end to a grounded electrical outlet.
- HDMI Cable: For digital video and audio, connect the supplied HDMI cable from your computer's HDMI output to the HDMI 1.4 port on the monitor.
- VGA Cable: For analog video, connect a VGA cable (not supplied) from your computer's VGA output to the VGA port on the monitor.
- Audio Out: If using external speakers or headphones, connect them to the 3.5mm audio output jack on the monitor.
Figure 2.2: Rear view showing connectivity ports.
2.4 Initial Power On
After connecting all cables, press the power button on the monitor. The monitor will automatically detect the input signal. If no signal is detected, ensure your computer is powered on and the correct input source is selected on the monitor.
3. Operating Instructions
3.1 On-Screen Display (OSD) Menu
The OSD menu allows you to adjust various monitor settings. Use the buttons located on the monitor (typically on the back or bottom right) to navigate the menu. Common adjustments include:
- Brightness/Contrast: Adjust the display's luminance and contrast levels.
- Color Settings: Modify color temperature, gamma, and individual RGB values.
- Input Selection: Manually switch between HDMI and VGA inputs.
- Audio: Adjust speaker volume or mute audio.
- Display Mode: Select preset display modes for different content types (e.g., Standard, Gaming, Movie).
3.2 Lenovo Smart Artery Software
The Lenovo Smart Artery software provides advanced display management and customization options directly from your computer. This self-learning software can adjust display settings based on your usage patterns and offers scenario modes and split-screen multitasking features. Install the software from the official Lenovo support website for your monitor model.
Figure 3.1: Lenovo Artery software interface for monitor settings.
4. Maintenance
4.1 Cleaning the Monitor
- Always power off the monitor and unplug the power cord before cleaning.
- Use a soft, lint-free cloth lightly dampened with water or a non-abrasive screen cleaner.
- Do not spray cleaner directly onto the screen. Apply it to the cloth first.
- Avoid using benzene, thinner, ammonia-based cleaners, or abrasive materials, as these can damage the screen surface.
4.2 General Care
- Avoid placing the monitor in direct sunlight or near heat sources.
- Ensure adequate ventilation around the monitor.
- Do not block ventilation openings.
- Protect the monitor from excessive dust and moisture.
5. Troubleshooting
If you encounter issues with your monitor, refer to the following common problems and solutions:
| Problem | Possible Solution |
|---|---|
| No image on screen |
|
| Image is blurry or distorted |
|
| No sound from speakers |
|
| Screen flickering |
|
6. Specifications
| Feature | Specification |
|---|---|
| Model Name | Lenovo L24i-4A |
| Display Size | 23.8 inches (60.45 cm) |
| Panel Type | IPS |
| Resolution | FHD 1920 x 1080 |
| Refresh Rate | 48Hz - 100Hz |
| Response Time | 1 ms (MPRT@100Hz) / 4 ms (Extreme Mode) / 6 ms (Normal Mode) / 14 ms (Off Mode) |
| Color Gamut | 99% sRGB, 16.7 Million Colours |
| Brightness | 250 nits |
| Aspect Ratio | 16:9 |
| Viewing Angle | 178°/178° (Horizontal/Vertical) |
| Connectivity | 1x HDMI 1.4, 1x VGA |
| Audio | Integrated 3W x 2 Speakers, 1x Audio Out (3.5mm) |
| Features | AMD FreeSync, Anti-Glare, Eyesafe 2.0 Certified, Natural Low Blue Light, Lenovo Smart Artery Software, Tilt Adjustment (-5° to +22°), VESA Mount Capability |
| Dimensions (HxWxD) | 31.5 x 53.9 x 4.1 cm (monitor head only); 315 x 539 x 41 mm |
| Weight | 3.01 kg (monitor head only); 3 kg 10 g |
| Included Components | Monitor with stand, 1x Power cable (1.8 m), Quick setup guide, 1x HDMI cable (1.8 m) |
7. Warranty and Support
7.1 Manufacturer Warranty
This Lenovo L24i-4A monitor comes with a 3 Year Manufacturer Carry-in Warranty. For detailed warranty terms and conditions, please visit the official Lenovo support website.
7.2 Warranty Registration and Service Request
To activate your monitor's warranty or to submit a service request, please visit the Lenovo support portal. You will typically need your invoice copy, a P-slip copy with the serial number updated, and a serial number snapshot available on the monitor.
- Warranty Lookup: https://pcsupport.lenovo.com/in/en/warranty-lookup#/
- Service Request: https://pcsupport.lenovo.com/in/en/servicerequest?ProblemType=/warranty/
Figure 7.1: Warranty details and support information.
8. Media Integration
No relevant product videos from the seller were available for embedding in this manual.