Xvive U7 Saxophone and Trumpet Wireless System Instruction Manual

Introduction

The Xvive U7 is a 2.4GHz wireless system designed for saxophone and trumpet, providing superior sound clarity and performance flexibility. This manual provides essential information for setting up, operating, and maintaining your wireless system.

What's in the Box

Verify that all items are present in your package:

• Xvive U7 Transmitter x1
• Xvive U7 Receiver x1
• Gooseneck Microphone x1
• Fur Windshield x1
• USB Cable x1
• Case x1

Image: All components included in the Xvive U7 Saxophone and Trumpet Wireless System package, neatly arranged.

Key Features

• 2.4GHz Wireless: Operates in the 2.4GHz ISM band for clear signal transmission.
• 100ft Working Range: Provides over 100 feet of reliable wireless range.
• Less than 5ms Latency: Ensures real-time audio transmission for distraction-free performance.
• 5-Hour Battery Life: Rechargeable battery for both transmitter and receiver, offering extended usage.
• Supercardioid Condenser Mic: Custom small diaphragm condenser microphone designed to capture the warmth and full-bodied sound of brass and woodwind instruments.
• 6 Selectable Channels: Allows selection of the best frequency to avoid interference.
• Clip-on Form Factor: Suitable for saxophones, trumpets, trombones, and other brass instruments.

Image: The Xvive U7 wireless system, featuring the transmitter, receiver, and microphone, shown in use with a saxophone.

Image: A detailed diagram showcasing the supercardioid condenser microphone, emphasizing its sensitivity and maximum SPL capabilities.

Image: The clip-on form factor of the Xvive U7 microphone, showing its attachment to a saxophone bell and compatibility with various brass instruments.

Setup Instructions

1. Charge the Units: Use the provided USB cable to fully charge both the transmitter and receiver before first use. The units have rechargeable lithium polymer batteries.
2. Attach Microphone to Transmitter: Securely screw the gooseneck microphone into the designated port on the transmitter.
3. Mount the Transmitter: Clip the transmitter onto the bell of your saxophone, trumpet, or other compatible instrument. Adjust the gooseneck to position the microphone optimally for sound capture.
4. Connect the Receiver: Plug the U7 receiver into your mixer, audio interface, or PA system via its XLR output.
5. Power On: Press and hold the power button on both the transmitter and receiver until the indicator lights illuminate.
6. Select Channels: The system features 6 selectable channels. To pair, ensure both the transmitter and receiver are set to the same channel. Simply click the 'CH' button on the transmitter and the channel button on the receiver to cycle through available channels until they match. The system will automatically pair.

Image: The Xvive U7 receiver connected to an audio mixer, illustrating the wireless connection from the instrument.

Operating Instructions

• Power Management: The units provide up to 5 hours of battery life. Monitor the battery indicator lights on both the transmitter and receiver. Recharge when lights indicate low battery.
• Channel Switching: If you experience interference, change the channel on both the transmitter and receiver to an unused frequency. The system supports up to 4 pairs of systems simultaneously.
• Optimal Performance: Maintain a clear line of sight between the transmitter and receiver for the best wireless range (up to 100ft). The ultra-low latency of less than 5ms ensures your performance is always in sync.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the units. Avoid using harsh chemicals or abrasive materials.
• Charging: Recharge the units using the provided USB cable. Do not use damaged cables or chargers.
• Storage: Store the system in its protective case when not in use to prevent damage. Keep away from extreme temperatures and moisture.

Troubleshooting

• No Sound:
  • Ensure both transmitter and receiver are powered on and fully charged.
  • Verify that both units are on the same channel.
  • Check all cable connections to your mixer/audio interface.
  • Adjust volume levels on your mixer/audio interface.
• Interference/Dropouts:
  • Change to a different channel on both units.
  • Reduce the distance between the transmitter and receiver.
  • Ensure there are no large metal objects or other 2.4GHz devices (like Wi-Fi routers) directly between the units.
• Short Battery Life:
  • Ensure units are fully charged before use.
  • Battery life may vary based on usage and environmental factors.

Specifications

Warranty and Support

For warranty information and technical support, please refer to the official Xvive website or contact your local distributor. Keep your proof of purchase for any warranty claims.