1. Introduction
Thank you for choosing Yaheetech 24-Inch Counter Height Bar Stools. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar stools. Please read these instructions carefully before assembly and retain them for future reference.
⚠ WARNING: This product can expose you to chemical Lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/furniture.
2. Package Contents
Before beginning assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.
- 2 x Seat Cushions (Brown Faux Leather)
- 2 x Metal Frames (Black)
- Hardware Kit (screws, washers, Allen wrench)
- Assembly Instructions
Image: Diagram illustrating the heavy-duty metal frame components, including the footrests and adjustable foot pads, which are part of the package contents.
3. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions (D x W x H) | 15.5" x 18.5" x 24" |
| Color | Brown |
| Brand | Yaheetech |
| Size | Set of 2 |
| Style | Modern |
| Furniture Finish | Metal, Faux Leather |
| Seat Height | 24 Inches |
| Maximum Weight Recommendation | 300 Pounds |
| Item Weight | 23.7 pounds (per set) |
| Assembly Required | Yes |
Image: Detailed dimensions of the bar stool, indicating a 24-inch height suitable for 34-38 inch high tables.
4. Setup and Assembly
Assembly is straightforward and requires minimal effort. Please follow these steps carefully:
- Unpack Components: Carefully remove all parts from the packaging. Place them on a clean, soft surface to prevent scratches.
- Identify Parts: Refer to the "Package Contents" section and the provided diagram to identify each component.
- Attach Seat Cushion to Frame: Align the pre-drilled holes on the underside of the seat cushion with the holes on the top of the metal frame.
- Secure with Screws: Insert the provided screws with washers through the frame and into the seat cushion. Hand-tighten all screws initially.
- Final Tightening: Once all screws are in place, use the included Allen wrench to fully tighten all screws. Do not overtighten.
- Adjust Foot Pads: The metal frame is equipped with adjustable foot pads. Adjust them as needed to ensure the stool is stable and level on your floor.
Repeat these steps for the second stool.
Image: Two fully assembled Yaheetech bar stools positioned at a kitchen island, demonstrating the final product.
5. Operating Instructions
These bar stools are designed for comfortable seating at counter-height surfaces. Observe the following guidelines for optimal use:
- Weight Capacity: Do not exceed the maximum weight recommendation of 300 pounds per stool.
- Intended Use: These stools are intended for indoor use as seating at kitchen islands, home bars, or similar counter-height surfaces (86-96 cm / 34-38 inches high).
- Stability: Always ensure the stool is placed on a flat, stable surface. Adjust the foot pads if the stool wobbles.
- Safe Seating: Sit centrally on the cushion. Avoid standing on the stool or using it as a ladder.
Image: A person seated on a bar stool at a counter, illustrating the intended use and comfortable design.
6. Maintenance
Regular maintenance will help preserve the appearance and longevity of your bar stools.
- Cleaning Faux Leather:
- Wipe spills immediately with a clean, dry cloth.
- For general cleaning, use a soft cloth dampened with mild soap and water. Wipe gently, then dry thoroughly with a clean cloth.
- Avoid abrasive cleaners, harsh chemicals, or solvents, as these can damage the faux leather finish.
- Frame Care: Wipe the metal frame with a soft, damp cloth. Dry immediately to prevent rust.
- Check Connections: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary to maintain stability.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause the faux leather to fade or crack.
Image: A close-up view of the faux leather surface, emphasizing its water-resistant and easy-to-clean characteristics, crucial for maintenance.
7. Troubleshooting
If you encounter any issues with your bar stools, refer to the following common solutions:
- Stool Wobbles:
- Ensure all screws are securely tightened.
- Adjust the leveling foot pads on the bottom of the frame to compensate for uneven floor surfaces.
- Squeaking Noises:
- Check and retighten all assembly screws.
- Ensure no parts are rubbing against each other incorrectly.
- Difficulty Assembling:
- Review the assembly instructions carefully, ensuring each step is followed in order.
- Verify that all parts are correctly oriented before tightening screws.
- Do not force parts together. If a part does not fit, re-check the instructions and part identification.
8. Warranty and Support
Yaheetech products are manufactured with quality and care. For specific warranty information or if you require further assistance, please contact Yaheetech customer support through their official website or the retailer where the product was purchased. Please have your model number (YT-00141811-01) and purchase date available.
9. Product Videos
While this product may have associated videos, specific video URLs and creator information were not available in the provided data to embed directly into this manual. For product videos, please visit the official Yaheetech product page or their brand store.
