CooSpo AP-B1
Contents
CooSpo Mini Electric Bike Pump User Manual
Model: AP-B1 | Brand: CooSpo
1. Introduction
Thank you for choosing the CooSpo Mini Electric Bike Pump. This portable and powerful tire inflator is designed for convenience and precision, ensuring your tires are always at the optimal pressure. Its compact size and versatile compatibility make it an essential tool for cyclists and sports enthusiasts alike. Please read this manual thoroughly before use to ensure proper operation and maintenance.

Figure 1: CooSpo Mini Electric Bike Pump
2. What's in the Box?
Verify that all items are present in your package:
- Bike Electric Pump
- Storage Bag
- Presta Valve
- Schrader Valve
- 2-in-1 Flexible Air Hose
- Ball Inflator Needle
- Type-C Charging Cable
- Wrist Lanyard
- User Manual

Figure 2: Package Contents
3. Safety Information
Please observe the following safety precautions:
- Do not leave the pump unattended while operating.
- Keep out of reach of children.
- Do not expose the pump to extreme temperatures or direct sunlight.
- Avoid dropping or subjecting the pump to severe impacts.
- Ensure the correct valve adapter is used for the item being inflated.
- Do not exceed the maximum recommended PSI for your tire or item.
- The pump may become warm during prolonged use. Use the silicone protector if provided, or allow it to cool down.
4. Setup
4.1 Charging the Pump
Before first use, fully charge the pump. Connect the provided Type-C charging cable to the pump's charging port and the other end to a USB power source (e.g., wall adapter, computer USB port). The battery indicator on the LCD screen will show charging status. A full charge typically takes about 40 minutes.

Figure 3: Charging the Pump
4.2 Attaching Valve Adapters
Select the appropriate valve adapter (Presta, Schrader, or ball needle) for the item you wish to inflate. Screw the chosen adapter securely onto the pump's air outlet. For bicycle tires, you may use the 2-in-1 flexible air hose for easier access.

Figure 4: Valve Compatibility
5. Operating Instructions
5.1 Powering On/Off
To power on the pump, press and hold the power button (U) until the LCD screen illuminates. To power off, press and hold the power button again.
5.2 Setting Desired Pressure
Once powered on, the LCD screen will display the current pressure and the preset pressure. Use the '+' and '-' buttons to adjust the desired pressure. The pump supports a maximum pressure of 120 PSI.

Figure 5: Real-time Pressure Display
5.3 Starting Inflation
Attach the pump securely to the valve of the item you wish to inflate. Press the power button (U) once to start the inflation process. The pump will automatically stop when the preset pressure is reached.

Figure 6: Easy to Use Operation
5.4 Switching Units (PSI/BAR)
To switch between PSI and BAR units, double-press the '-' button.
5.5 Using the LED Light
The pump features a built-in LED light for use in low-light conditions. Double-press the '+' button to turn the light on or off.

Figure 7: LED Light for Night Use
5.6 Inflation Performance
The pump is designed for efficient inflation. Refer to the table below for approximate inflation times and available uses per full charge for common tire types:

Figure 8: Working Performance When Fully Charged
6. Maintenance
6.1 Cleaning
Wipe the pump with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no water enters the charging port or air outlet.
6.2 Storage
Store the pump in a cool, dry place away from direct sunlight and extreme temperatures. Use the provided storage bag to protect it from dust and scratches.
6.3 Battery Care
To prolong battery life, charge the pump regularly, even if not in frequent use. Avoid fully discharging the battery for extended periods.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Pump does not turn on | Low battery; Power button not held long enough | Charge the pump; Press and hold the power button for 2-3 seconds |
| Slow inflation | Low battery; Air leakage from connection | Charge the pump; Ensure valve adapter is securely attached |
| Inaccurate pressure reading | Loose connection; Sensor calibration needed | Re-attach adapter securely; Consult customer support if persistent |
| Pump gets hot during use | Normal operation during prolonged inflation | Allow pump to cool down; Use silicone protector if available |
8. Specifications
| Feature | Detail |
|---|---|
| Model Name | AP-B1 |
| Brand | CooSpo |
| Color | Black |
| Material | Acrylonitrile Butadiene Styrene, LCD |
| Item Weight | 0.21 Kilograms (129g for pump only) |
| Power Source | Battery Powered (Built-in 500mAh) |
| Air Flow Capacity | 14 LPM |
| Maximum Pressure | 120 PSI |
| Charging Time | Approx. 40 minutes (via Type-C) |
| Dimensions | 74 x 48 x 34 mm (approx.) |
9. Warranty and Support
9.1 Warranty Information
This CooSpo product comes with a 1-Year Manufacturer Warranty. Please retain your proof of purchase for warranty claims.
9.2 Customer Support
For any questions, technical support, or warranty inquiries, please contact CooSpo customer service through the retailer's platform or visit the official CooSpo website for contact information.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.