MicroTech Blood Glucose Test Strips & Lancets Instruction Manual

1. Introduction

This manual provides essential information for the proper use and maintenance of your MicroTech Blood Glucose Test Strips and Lancets, designed for use with the MicroTech GoCheck2 and GoCheck2 Connect blood glucose meters. These products are intended for self-testing by individuals for monitoring blood glucose levels.

The MicroTech system offers stable and accurate testing, immunity to oxygen partial pressure interference, and is suitable for a wide range of users, including infants, pregnant women, anemic individuals, and obese individuals. It features no-coding technology for simplified daily monitoring and provides quick results within 5 seconds.

2. Product Overview

The MicroTech Blood Glucose Test Strips and Lancets kit typically includes the following components:

• GoCheck2 Blood Glucose Meter (sold separately or as part of a kit)
• Blood Glucose Test Strips (50 count per bottle, 2 bottles for 100 strips)
• Blood Lancets (50 count per box)
• Lancing Device
• Carrying Pouch

Figure 2.1: Overview of MicroTech Blood Glucose Test Strips, Lancets, and Meter Packaging.

Figure 2.2: Structural diagram of a lancet and a test strip, showing the sample area, fingerhold area, test window, and contacts.

3. Setup

3.1 Inserting Batteries (GoCheck2 Meter)

The GoCheck2 meter is powered by two CR2032 lithium batteries. To insert or replace batteries:

1. Open the battery compartment cover on the back of the meter.
2. Insert two CR2032 batteries, ensuring correct polarity (+/-).
3. Close the battery compartment cover securely.

3.2 Preparing the Lancing Device

The lancing device is used to obtain a blood sample. Follow these steps:

1. Remove the cap from the lancing device.
2. Insert a new, sterile lancet firmly into the lancet holder.
3. Twist off the protective cap from the lancet.
4. Replace the lancing device cap.
5. Adjust the penetration depth by rotating the cap. A lower number indicates a shallower prick, suitable for sensitive skin.
6. Pull back the cocking mechanism until it clicks, indicating it is ready to use.

Figure 3.1: The tri-beveled tip of MicroTech lancets is designed to minimize skin trauma and discomfort during blood sampling.

3.3 Inserting a Test Strip

Before performing a test, ensure the meter is off. Insert a test strip into the test strip port of the meter. The meter will automatically turn on and display a blood drop symbol, indicating it is ready for a blood sample.

4. Operation

4.1 Performing a Blood Glucose Test

Follow these steps for an accurate blood glucose reading:

1. Wash your hands thoroughly with soap and warm water, then dry them completely.
2. Insert a test strip into the meter.
3. Place the lancing device firmly against the side of your fingertip and press the release button.
4. Gently squeeze your finger to form a small drop of blood.
5. Touch the tip of the test strip to the blood drop. The strip will draw the blood into the sample area.
6. The meter will begin a 5-second countdown, and your blood glucose result will appear on the display.

Figure 4.1: The MicroTech system requires only a tiny 0.5µL blood sample for efficient and quick testing.

4.2 Understanding Results and Memory Function

The GoCheck2 meter provides accurate results within 5 seconds. A typical fasting blood glucose reading for a non-diabetic individual is usually between 80-120 mg/dL. Always consult your healthcare professional for personalized target ranges and interpretation of your results.

The meter can store up to 500 blood glucose test results, allowing you to track your trends over time. It can also calculate average readings for 7, 14, 30, and 90 days, providing a comprehensive overview of your glucose control.

Figure 4.2: Key advantages of the MicroTech system: accurate measurement, high testing efficiency, longer validity period, and wider applicability.

5. Maintenance

5.1 Test Strip Storage and Validity

Proper storage of test strips is crucial for accurate results:

• Store test strips between 2-35°C (35.6-95°F). Do not refrigerate.
• Keep humidity below 90%.
• Discard test strips 6 months after first opening the vial.
• Always keep the vial cap tightly closed after removing a strip.

Figure 5.1: Test strips have a 24-month unopened shelf life and remain valid for 180 days after opening.

5.2 Cleaning the Meter

Clean the meter regularly with a soft, damp cloth. Do not immerse the meter in water or use harsh cleaning agents.

5.3 Disposal of Used Materials

Dispose of used test strips and lancets in a puncture-resistant container (sharps container) according to local regulations. Do not dispose of them in regular household trash.

6. Troubleshooting

If you encounter issues with your MicroTech blood glucose monitoring system, consider the following common troubleshooting tips:

• Error Message: Refer to the full user manual for a list of error codes and their corresponding solutions.
• Inaccurate Readings: Ensure test strips are not expired and have been stored correctly. Verify that the test strip is fully inserted into the meter. Ensure you have applied a sufficient blood sample to the strip.
• Meter Not Turning On: Check if the batteries are correctly inserted and have sufficient charge. Replace batteries if necessary.
• No Blood Sample: Adjust the lancing device depth if the prick is too shallow. Ensure your hands are warm and you gently squeeze your finger to encourage blood flow.

For persistent issues or concerns, contact MicroTech customer support or your healthcare provider.

7. Specifications

Figure 7.1: Key specifications for MicroTech Blood Glucose Test Strips and Lancets.

8. Warranty and Support

For detailed warranty information, product registration, or technical support, please refer to the documentation included with your MicroTech Blood Glucose Monitoring System or visit the official MicroTech Medical website. Contact information for customer service is typically provided in the product packaging or on the manufacturer's website.

Legal Disclaimer: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.