Transformers G1028

Download PDF
Contents

Transformers Age of the Primes Deluxe Class Combaticon Vortex Instruction Manual

Introduction

This manual provides instructions for the Transformers Age of the Primes Deluxe Class Combaticon Vortex action figure. This 5.5-inch figure converts between robot and helicopter modes and can combine with other Combaticon figures to form Bruticus.

What's Included

  • Combaticon Vortex Figure
  • Detachable Propeller Accessory
  • 3 Blaster Accessories

Safety Information

WARNING: CHOKING HAZARD – Small parts may be generated. Not for children under 3 years.

Recommended for ages 8 and up.

Transformation Instructions

The Combaticon Vortex figure converts between robot and helicopter modes in 19 steps. Refer to the visual guide on the product packaging for detailed step-by-step instructions.

Robot to Helicopter Mode

To transform from robot to helicopter mode, carefully follow the 19 sequential steps outlined in the visual guide. Key steps involve folding the limbs, rotating the torso, and positioning the propeller and blasters.

Back of Combaticon Vortex packaging with 19-step transformation guide

Image: The reverse side of the product packaging, illustrating the 19 steps required to convert the figure between robot and helicopter modes.

Combaticon Vortex in helicopter mode

Image: The Combaticon Vortex figure transformed into its helicopter vehicle mode, featuring rotating blades and mounted blasters.

Helicopter to Robot Mode

To transform from helicopter to robot mode, reverse the 19 steps. Ensure all parts are securely locked into place in robot mode.

Combaticon Vortex in robot mode, standing upright

Image: The Combaticon Vortex figure in its robot form, showcasing its detailed design and proportions.

Accessories

The Combaticon Vortex figure includes a detachable propeller and three blaster accessories. These accessories can be attached to the figure in both robot and helicopter modes.

Combaticon Vortex in robot mode with all included accessories

Image: The Combaticon Vortex figure in robot mode, equipped with its detachable propeller and three blaster accessories.

Articulation and Posing

The figure features articulated head, arms, and legs, allowing for a variety of action poses. The detachable propeller can also spin 360 degrees.

Combaticon Vortex in robot mode, posed dynamically

Image: The Combaticon Vortex figure in robot mode, holding blasters and ready for action.

Combining with Bruticus

The Combaticon Vortex figure is designed to combine with other Transformers Combaticon figures (each sold separately) to create the larger Bruticus action figure. Follow the instructions provided with the other Combaticon figures for combining them.

Care and Maintenance

  • Keep the figure clean by wiping it with a soft, dry cloth.
  • Avoid exposing the figure to extreme temperatures or direct sunlight for prolonged periods.
  • Handle all moving parts and joints gently during transformation to prevent damage.
  • Store accessories in a safe place to prevent loss.

Specifications

FeatureDetail
BrandTransformers (Hasbro)
Model NameGEN PRIME DLX VORTEX
Model NumberG1028
Figure TypeAction Figure
CharacterCombaticon Vortex
Size5.5 inches (14 cm)
Transformation Steps19 steps (Robot to Helicopter)
Recommended Age8 Years and Up
MaterialPlastic
Weight0.09 Kilograms

Warranty and Support

For warranty information or product support, please refer to the manufacturer's official website or contact their customer service department. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.