Introduction
This manual provides detailed instructions for the safe and effective use of your HORL 3 Cruise Rolling Knife Sharpener. Please read all instructions carefully before first use and retain this manual for future reference.
Product Components
The HORL 3 Cruise Rolling Knife Sharpener consists of two primary components: the magnetic angle support and the rolling sharpener unit.
Image: The HORL 3 Cruise Rolling Knife Sharpener, showing the magnetic angle support and the rolling sharpener unit.
- Magnetic Angle Support: This component features strong neodymium magnets on each side, designed to securely hold your knife at a precise sharpening angle. It offers two fixed angles: 15° for fine edges and 20° for robust blades.
- Rolling Sharpener Unit: This cylindrical unit contains two distinct discs. One side features a diamond grinding disc for initial sharpening and edge creation, while the other side has a stainless steel honing disc for refining the edge and removing burrs. The industrial diamonds used are highly durable and efficient.
Setup
- Choose a Stable Surface: Place the magnetic angle support on a clean, stable, and flat surface, such as a cutting board or countertop. Ensure the surface is non-slip to prevent movement during sharpening.
- Select the Sharpening Angle: The magnetic angle support has two sides, marked 15° and 20°.
- 15° Grinding Angle: Ideal for fine blades made from high-quality steel, providing a filigree sharpness.
- 20° Grinding Angle: Recommended for robust blades like European chef's knives, ensuring long-lasting sharpness for everyday use.
Image: Close-up view of the HORL 3 Cruise magnetic angle support, highlighting the 15-degree and 20-degree sharpening angles.
- Attach the Knife: Place the knife blade flat against the chosen magnetic side of the angle support. The strong magnets will hold the knife securely in place. Ensure the blade is flush with the surface of the cutting board or countertop.
Operating Instructions
Follow these steps to sharpen your knife effectively:
- Initial Sharpening (Diamond Disc):
- Hold the rolling sharpener unit with the diamond grinding disc facing the knife blade.
- Place the diamond disc against the knife blade, ensuring it makes full contact with the edge.
- Roll the sharpener unit back and forth along the entire length of the blade, from the heel to the tip. Apply light, consistent pressure. You will hear a grinding sound, which is normal.
- Perform approximately 5-7 passes on one side of the blade.
Image: A user demonstrating the sharpening motion with the HORL 3 Cruise, showing the rolling unit moving along the knife blade.
- Honing (Stainless Steel Disc):
- Flip the rolling sharpener unit to the stainless steel honing disc side.
- Repeat the back-and-forth rolling motion along the entire length of the blade, applying very light pressure. This step refines the edge and removes any burrs created during sharpening.
- Perform approximately 5-7 passes on this side.
- Repeat for the Other Side: Carefully detach the knife from the magnetic angle support, flip it over, and re-attach it to the other side of the magnetic angle support. Repeat steps 1 and 2 for the second side of the blade.
- Test Sharpness: After sharpening both sides, carefully test the sharpness of your knife. A common test is to try slicing a ripe tomato or a piece of paper. The knife should cut smoothly without tearing.
Maintenance
- Cleaning: After each use, wipe down the diamond and stainless steel discs with a damp cloth to remove any metal particles or dust. The magnetic angle support can also be wiped clean. Do not immerse the sharpener in water.
- Storage: Store the HORL 3 Cruise Rolling Knife Sharpener in a dry place, away from extreme temperatures and humidity. Keep it out of reach of children.
- Diamond Wear: During the first few uses, it is normal for some diamond particles to come off the grinding disc. This is part of the conditioning process and will result in a smoother surface over time without affecting performance.
Troubleshooting
- Knife Not Sharpening:
- Ensure the knife blade is placed flush against the magnetic angle support and the cutting surface.
- Verify you are using the correct angle (15° or 20°) for your knife type.
- Increase the number of passes on the diamond grinding disc if the knife is very dull.
- Uneven Edge:
- Ensure consistent pressure and full contact of the rolling unit across the entire blade length during each pass.
- Make sure the knife is securely held by the magnets and does not shift during sharpening.
- Excessive Metal Dust:
- This is normal during the initial grinding phase, especially for very dull knives. Clean the sharpener and knife thoroughly after use.
Specifications
| Brand | HORL |
| Model Number | HO3C |
| Material | Polypropylene (Body), Diamond (Grinding Disc), Stainless Steel (Honing Disc) |
| Color | Sand |
| Product Dimensions | 4.72"L x 2.53"W x 5.31"H |
| Item Weight | 1.48 pounds |
| Sharpening Angles | 15° and 20° |
| Grit Type | Medium (Diamond) |
Warranty Information
For detailed warranty information, please refer to the official HORL website or contact HORL customer support directly. Retain your proof of purchase for any warranty claims.
Customer Support
If you have any questions, concerns, or require assistance with your HORL 3 Cruise Rolling Knife Sharpener, please visit the official HORL website or contact their customer support team. Contact details can typically be found on the product packaging or the official brand website.
