Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Spigen Magnetic Air Vent Car Mobile Holder MFT13-1. Please read this guide thoroughly before use to ensure proper functionality and safety.
Package Contents
Verify that all items are present in your package:
- Spigen Magnetic Car Mount (MFT13-1)
- MagSafe Ring (for non-MagSafe compatible devices)
- Extra Mini Dashboard Mount
Setup Instructions
1. Air Vent Installation
- Identify a suitable air vent in your vehicle that provides a stable mounting surface and does not obstruct your view.
- Gently push the air vent clip onto one of the vent blades until it is securely attached. Ensure the clip is firmly seated to prevent movement.
- Adjust the angle of the mount to your preferred viewing position.
2. Dashboard Installation (Optional)
- Clean the desired dashboard surface thoroughly with an alcohol wipe and allow it to dry completely.
- Peel off the protective film from the adhesive base of the extra mini dashboard mount.
- Press the mount firmly onto the cleaned dashboard surface for at least 30 seconds. Allow the adhesive to cure for 24 hours before attaching your device.
- Attach the magnetic holder to the dashboard mount.
3. Attaching Metal Ring (for non-MagSafe devices)
If your smartphone is not MagSafe compatible or does not have a MagSafe case, use the included metal ring for optimal magnetic connection.
- Clean the back of your phone or phone case where you intend to place the metal ring.
- Carefully peel off the adhesive backing from the metal ring.
- Center the metal ring on the back of your device or case. For wireless charging compatibility, ensure the ring does not cover the charging coil area.
- Press firmly to secure the ring.
Operating Instructions
Attaching Your Device
Once the mount is installed, simply bring your MagSafe-compatible device (or device with the attached metal ring) close to the magnetic surface of the holder. The strong N52 magnets will automatically secure your phone in place.
Adjusting Viewing Angle
The mount features a 360-degree free rotation. Gently rotate your device or the magnetic head of the mount to achieve your desired portrait or landscape viewing angle.
Maintenance
To ensure the longevity and optimal performance of your car mobile holder, follow these maintenance guidelines:
- Cleaning: Wipe the surface of the mount with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners.
- Checking Connections: Periodically check that the mount is securely attached to the air vent or dashboard. Ensure the magnetic surface is free from dust or debris that could weaken the magnetic hold.
- Adhesive Longevity: If using the dashboard mount, avoid repositioning it frequently as this can reduce the effectiveness of the adhesive.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Phone does not hold securely. | Weak magnetic connection; improper metal ring placement; heavy phone/case. | Ensure the metal ring is correctly centered on non-MagSafe devices. Verify the phone or case is not excessively thick. Clean the magnetic surface. |
| Mount is unstable on air vent. | Improper installation; vent blades too thin/loose. | Re-attach the vent clip, ensuring it is firmly seated on a stable vent blade. Consider using the dashboard mount if the vent is unsuitable. |
| Dashboard mount adhesive fails. | Surface not clean; insufficient curing time; extreme temperatures. | Ensure the dashboard surface is clean and dry before application. Allow 24 hours for the adhesive to cure. Avoid extreme heat or cold immediately after installation. |
Specifications
- Brand: Spigen
- Model Name: MFT13-1
- Colour: Gray
- Compatible Devices: iPhone 17/16/15/14/13/12 series, Samsung Galaxy series, iQOO, Redmi, Oneplus, Pixel, Oppo, and most mobile phone devices
- Mounting Type: Air Vent, Dashboard (with included accessory)
- Product Features: MagSafe-Compatible, Universal Use with Included Metal Ring, 360-Degree Free Rotation, N52 Magnets
- Item Dimensions: 10.2 x 5.7 x 5.8 Centimeters
- Item Weight: 70 Grams
- Material: Plastic
- Country of Origin: China
Warranty and Support
Warranty: This product comes with a 6-month manufacturer's warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
Manufacturer/Importer Contact:
Spigen India Private Limited
NO.295 - 296, Ecotech-1, Extension,
Greater Noida, Uttar Pradesh 201310, India
For additional support or product information, please visit the Official Spigen Store on Amazon.