Important Safety Instructions
Please read all instructions carefully before using this appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Do not touch hot surfaces. Use handles or knobs.
- To protect against fire, electric shock, and injury to persons, do not immerse cord, plugs, or coffee maker in water or other liquid.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
- Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner.
- The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons.
- Do not use outdoors.
- Do not let cord hang over edge of table or counter, or touch hot surfaces.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to “off”, then remove plug from wall outlet.
- Do not use appliance for other than intended use.
Product Overview
Familiarize yourself with the components of your Electactic Coffee Maker.
Components
- Bean Hopper: For whole coffee beans.
- Grinder: Integrated burr grinder for fresh coffee.
- Water Tank: Transparent tank with water level markings.
- Control Panel: Smart LED touchscreen for settings and programming.
- Filter Basket: Holds the coffee filter (paper cone filter recommended).
- Carafe: Glass carafe with handle and lid for brewed coffee.
- Warming Plate: Keeps coffee warm after brewing.
Image: Front view of the Electactic 10-Cup Drip Coffee Maker, showcasing its sleek black and silver design, LED display, bean hopper, and glass carafe, with coffee beans and a cup of coffee beside it.
Control Panel and Display
The smart LED touchscreen allows for easy operation and customization.
- LED Display: Shows time, brewing status, and selected settings.
- Power Button: Turns the machine on/off.
- Program Button: Used to set the 24-hour timer.
- Grind Size/Strength Button: Adjusts coffee strength and grind coarseness.
- Cup Selection Button (2-10): Adjusts the amount of water for brewing 2 to 10 cups.
Setup
Before first use, and for daily operation, follow these steps:
- Unpack and Clean: Remove all packaging materials. Wash the carafe, filter basket, and bean hopper lid with warm, soapy water. Rinse thoroughly and dry. Wipe the exterior of the coffee maker with a damp cloth.
- Place the Machine: Position the coffee maker on a flat, stable, heat-resistant surface near an electrical outlet.
- Fill Water Tank: Open the water tank lid and fill the water tank with fresh, cold water up to the desired cup marking (2-10 cups). Do not exceed the MAX fill line.
- Add Coffee Beans or Grounds:
- For Whole Beans: Open the bean hopper lid and pour whole coffee beans into the hopper. Ensure the hopper is properly closed.
- For Pre-Ground Coffee: Insert a paper cone filter into the filter basket. Add the desired amount of pre-ground coffee into the filter.
- Insert Filter Basket and Carafe: Ensure the filter basket is correctly seated. Place the empty carafe with its lid on the warming plate.
Image: A hand adding ground coffee into a paper filter cone within the coffee maker's filter basket, while another hand pours whole beans into the top-mounted bean hopper, illustrating the 'Grind & Brew 2 IN 1' functionality.
Operating Instructions
Brewing Coffee (Grind & Brew)
- Ensure water is in the tank and whole beans are in the hopper.
- Place a paper cone filter in the filter basket.
- Use the 'Grind Size' knob to select one of the 8 grind settings. Finer settings for stronger coffee, coarser for milder.
- Press the 'Strength' button to choose your desired coffee strength: Mild, Classic, or Rich.
- Press the 'Cup Selection' button to select the number of cups (2-10).
- Press the 'Power' button to start the grinding and brewing process. The machine will grind the beans, then brew the coffee.
Image: A close-up of a hand adjusting the grind setting knob on the coffee maker, with an overlay indicating '8 Grind Settings' and a visual representation of different grind coarseness levels.
Image: The coffee maker with three cups of coffee in front, labeled 'Rich', 'Mild', and 'Classic', demonstrating the '3 Options of Coffee Strength' feature.
Brewing Coffee (Pre-Ground)
- Ensure water is in the tank.
- Insert a paper cone filter into the filter basket and add your desired amount of pre-ground coffee.
- Press the 'Strength' button to choose your desired coffee strength.
- Press the 'Cup Selection' button to select the number of cups (2-10).
- Press the 'Power' button to start the brewing process. The grinder will not activate.
Setting the 24-Hour Timer
Program your coffee maker to start brewing at a specific time.
- Ensure the coffee maker is set up for brewing (water, beans/grounds, filter, carafe in place).
- Press the 'Program' button. The display will show 'PROG'.
- Use the 'Hour' and 'Minute' buttons (often integrated with other controls, refer to specific button icons on your machine) to set the desired start time.
- Once the time is set, press the 'Program' button again to confirm. The display will show the current time and a small clock icon, indicating the timer is active.
- The coffee maker will automatically start brewing at the programmed time.
Keep Warm Function
After brewing, the warming plate will automatically keep your coffee warm for up to 2 hours.
Image: A hand removing the glass carafe from the coffee maker, with a glowing red warming plate visible and an overlay indicating '2-Hours Warming Function'.
Maintenance
Regular cleaning ensures optimal performance and extends the life of your coffee maker.
Daily Cleaning
- Unplug: Always unplug the coffee maker before cleaning and allow it to cool completely.
- Carafe and Filter Basket: Remove the carafe and filter basket. Discard the used coffee grounds and filter. Wash both with warm, soapy water. Rinse thoroughly and dry. These parts may also be top-rack dishwasher safe (check product manual for specific confirmation).
- Exterior: Wipe the exterior surfaces of the coffee maker with a soft, damp cloth. Do not use abrasive cleaners or scouring pads.
- Warming Plate: Wipe the warming plate with a damp cloth. Do not immerse the unit in water.
Descaling (Monthly or Bi-Monthly)
Mineral deposits from water can build up over time, affecting performance. Descale regularly.
- Fill the water tank with a mixture of white vinegar and water (1:2 ratio, e.g., 1 cup vinegar to 2 cups water).
- Place an empty carafe on the warming plate.
- Run a brewing cycle without coffee grounds.
- After the cycle, let the solution sit in the carafe for 15-20 minutes, then discard.
- Run 2-3 cycles with fresh, clean water to rinse out any remaining vinegar taste.
Troubleshooting
Refer to this section for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Coffee not brewing. | No water in tank; machine not plugged in; power button not pressed; timer set. | Fill water tank; ensure plug is secure; press power button; check timer settings. |
| Coffee is too weak. | Not enough coffee grounds/beans; coarse grind setting; weak strength selected. | Add more coffee; select a finer grind setting; choose 'Rich' strength option. |
| Coffee is too strong. | Too much coffee grounds/beans; fine grind setting; strong strength selected. | Reduce coffee amount; select a coarser grind setting; choose 'Mild' strength option. |
| Grinder not working. | No beans in hopper; hopper lid not closed properly; machine set to pre-ground mode. | Fill bean hopper; ensure lid is secure; check settings to ensure grind function is active. |
| Water leaking. | Water tank overfilled; carafe not properly placed; filter basket overflowing. | Do not overfill water tank; ensure carafe is centered; check filter basket for clogs. |
Specifications
Technical details of your Electactic Coffee Maker.
| Feature | Detail |
|---|---|
| Brand | Electactic |
| Capacity | 1.5 Liters (10 Cups) |
| Color | BLACK |
| Product Dimensions | 12.36"D x 8.39"W x 16.93"H |
| Special Features | Integrated Coffee Grinder, Programmable, Timer, Smart LED Touchscreen, Customizable Strength & Grind Size, 2-Hour Keep Warm Function |
Image: The coffee maker shown with its key dimensions: 8.26 inches width, 9.84 inches depth, and 16.81 inches height.
Warranty and Support
This Electactic coffee maker comes with a standard manufacturer's warranty. Please refer to the product packaging or the official Electactic website for specific warranty terms and conditions.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Electactic customer service through their official channels. Keep your purchase receipt as proof of purchase for warranty claims.
Online Support: Visit the official Electactic website for FAQs and support resources. Electactic Store on Amazon
