Introduction
Thank you for choosing the Marsail Electric Standing Desk. This manual provides essential information for the safe assembly, operation, and maintenance of your new adjustable height desk. Please read these instructions thoroughly before use and retain them for future reference.
Important Safety Information
- Always unplug the desk when not in use or before cleaning.
- Keep fingers and other body parts clear of moving parts during height adjustment.
- Ensure the desk is placed on a stable, level surface.
- Do not exceed the maximum weight limit of 176 lbs (80 kg).
- Follow all assembly instructions carefully to prevent injury or damage.
- Do not allow children to operate the desk without adult supervision.
Included Components
Verify that all components are present before beginning assembly:
- Electric Standing Desk Frame
- Desktop Surface
- Control Panel
- Cable Clip
- Headphone Hook
- Installation Instruction Manual
- Necessary installation tools (Allen Wrench)
Setup and Assembly
Assembly is required for this product. It is recommended that 1 person perform the assembly. A screwdriver is recommended for certain steps, though an Allen wrench is included.
- Unpack all components and verify against the included components list.
- Place the desktop upside down on a soft, clean surface to prevent scratches.
- Attach the lifting columns to the desktop using the provided screws and Allen wrench.
- Secure the foot pads to the bottom of the lifting columns.
- Mount the control panel and headphone hook to the underside of the desktop as indicated in the detailed instruction manual.
- Connect all cables from the lifting columns to the control box, ensuring secure connections.
- Use the provided cable clips to manage and organize cables.
- Carefully flip the desk upright and place it in its desired location.
Operating Instructions
Height Adjustment
The Marsail Electric Standing Desk offers a flexible height adjustment range from 28.3 inches to 46.5 inches, allowing for comfortable transitions between sitting and standing positions. Use the 'Up' and 'Down' buttons on the control panel to adjust the desk height.
Control Panel and Memory Presets
The desk features a convenient control panel with a digital display and four customizable memory height settings. This allows for quick and easy switching between preferred heights.
Setting Memory Presets:
- Adjust the desk to your desired height using the 'Up' or 'Down' buttons.
- Press and hold one of the numbered memory buttons (1, 2, 3, or 4) until the display flashes or beeps, indicating the height has been saved.
Recalling Memory Presets:
- Simply press the corresponding numbered memory button (1, 2, 3, or 4) to automatically move the desk to the saved height.
Quiet Motor Operation
The adjustable desk is equipped with a motor designed for minimal noise output, ensuring quiet operation that will not disturb others, especially during night use. The noise level is approximately 50dB, comparable to a quiet office environment.
Maintenance
To ensure the longevity and proper function of your Marsail Electric Standing Desk, follow these simple maintenance guidelines:
- Cleaning: Wipe the desk surfaces with a dry cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Regular Checks: Periodically check all screws and connections to ensure they are tight. Retighten if necessary.
- Cable Management: Keep cables organized using the provided cable clips to prevent snagging or damage during height adjustments.
Troubleshooting
If you encounter issues with your Marsail Electric Standing Desk, refer to the following common troubleshooting steps:
- Desk Not Moving:
- Ensure the power cord is securely plugged into both the desk and a working power outlet.
- Check for any obstructions under or around the desk that might prevent movement.
- Unplug the desk for 10-15 seconds, then plug it back in to perform a soft reset.
- Uneven Movement or Instability:
- Verify that the desk is placed on a level surface.
- Check that all assembly screws are tightened securely.
- Ensure the weight on the desktop is evenly distributed and does not exceed the maximum load capacity.
- Error Codes on Display:
- Refer to the detailed instruction manual for specific error code meanings and solutions. Often, unplugging and replugging the desk can resolve temporary errors.
Smart Anti-Collision System
The desk is equipped with a smart anti-collision system. If the desk encounters an obstruction during height adjustment, it will automatically stop and reverse slightly to prevent damage. Clear any obstructions before resuming adjustment.
Specifications
| Brand | Marsail |
| Model Number | TZESD22N-US |
| Product Dimensions (D x W x H) | 24"D x 55"W x 28.3"H |
| Minimum Height | 28.3 Inches |
| Maximum Height | 46.5 Inches |
| Color | Maple |
| Top Material Type | Maple Wood |
| Base Material | Alloy Steel |
| Maximum Weight Recommendation | 176 Pounds |
| Item Weight | 42.3 Pounds |
| Lifting Mechanism | Electric |
| Required Assembly | Yes |
| Product Care Instructions | Wipe with Dry Cloth |
Warranty and Support
The Marsail Electric Standing Desk comes with a Limited Warranty. The manufacturer's warranty type is listed as '5', which typically refers to a 5-year warranty on parts, but please consult your purchase documentation or the official Marsail website for specific warranty terms and conditions.
For technical support, troubleshooting assistance, or warranty claims, please contact Marsail customer service through the retailer where the product was purchased or visit the official Marsail brand store online.
