Jensen Tools JTK-34 User Manual

Product Overview

The Jensen Tools JTK-34 is a comprehensive kit designed for professional field service technicians. It features a durable gray Cordura Plus case, providing organized storage for a wide array of inch and metric tools. This kit is ideal for various applications, including PC service, aviation, HVAC, and biomedical repair, ensuring quick access to essential tools for any job.

Image: The Jensen Tools JTK-34 kit, shown open, revealing an organized arrangement of various hand tools and a compartment for a multimeter (not included). The durable gray Cordura Plus case is designed for portability and easy access to tools.

Setup and Features

The JTK-34 kit is designed for immediate use with its pre-organized layout. Simply open the case to access the tools.

• Case Style: Single Cordura Plus case in gray, offering robust protection and portability.
• Pallet Style: Fixed pallets ensure tools remain securely in place during transport and use.
• Tool Compatibility: Contains both inch and metric professional service tools, suitable for a wide range of applications.
• DMM Compartment: Designed with room for an optional Digital Multimeter (DMM is not included with the kit).
• External Pockets: Features three external pockets for larger accessories: one measuring 11 x 9 x 2 inches and two measuring 5-1/2 x 9 x 2 inches.
• Internal Pockets: Numerous internal pockets are available for smaller items such as cell phones, test leads, and other accessories.
• Handles: Equipped with web strap handles featuring soft rubber grips for comfortable carrying. D-rings are also included for an optional shoulder strap (not included).

Operating Instructions

This kit provides a comprehensive set of tools for various service applications. Select the appropriate tool for the task at hand, ensuring proper handling and safety procedures are followed.

Kit Contents:

• 1 x Jonard Tools EX1 DIP Extractor for 8 to 24-pin narrow chips
• 1 x Techni-Pro 36B910 Nutdriver Blade, 5/16" Drive Size, Metal
• 1 x Techni-Pro 1-003/4012 Miniature Diagonal Cutters 4-3/8" Long
• 1 x Techni-Pro 36B912 Nutdriver Blade, 3/8" Drive Size, Metal
• 1 x Techni-Pro 1-007/4024 Miniature Chain Nose Pliers with Serrated Jaws 4-7/8" Long
• 1 x Techni-Pro 3B655 Nutdriver Blade, 5.0mm
• 1 x Eveready PLED23AEH Silver Penlight with Batteries
• 1 x Techni-Pro 3B661 Nutdriver Blade, 7.0mm
• 1 x Techni-Pro 10946 L-Key Balldriver Set, 6 pc., 1.
• (Note: The full list of tools may vary slightly based on specific kit configurations. Refer to your packing list for exact contents.)

Maintenance

Proper maintenance ensures the longevity and performance of your JTK-34 tool kit and its contents.

• Cleaning Tools: After each use, wipe down tools to remove dirt, grease, or debris. For metal tools, a light coat of rust preventative oil can be applied if storing for extended periods in humid environments.
• Case Care: The Cordura Plus case can be cleaned with a damp cloth and mild soap. Allow it to air dry completely before closing or storing. Avoid harsh chemicals that may damage the fabric.
• Storage: Store the kit in a dry, cool place away from direct sunlight and extreme temperatures. Ensure all tools are properly seated in their designated slots within the fixed pallets to prevent damage during transport.
• Inspection: Periodically inspect tools for wear, damage, or corrosion. Replace any damaged tools to maintain safety and effectiveness.

Troubleshooting

This section addresses common issues you might encounter with your tool kit.

• Missing Tool: Double-check all compartments and external pockets. Ensure tools are returned to their correct slots after use. If a tool is genuinely missing, contact JENSEN Tools for replacement options.
• Damaged Case: While the Cordura Plus case is durable, excessive force or sharp objects can cause damage. Minor tears can sometimes be repaired with fabric repair kits. For significant damage, consider contacting JENSEN Tools for repair or replacement options.
• Tools Not Fitting Properly: Ensure each tool is placed in its correct, corresponding slot. The fixed pallet design requires tools to be inserted precisely. Do not force tools into incorrect slots.

Specifications

Warranty and Support

For specific warranty information regarding your Jensen Tools JTK-34 kit, please refer to the documentation provided at the time of purchase or contact JENSEN Tools directly. JENSEN Tools offers custom build options and support for industry-specific needs.

Contact Information: Please visit the official JENSEN Tools website or contact their customer service for technical support, parts, or warranty claims. Refer to your purchase receipt or product packaging for the most current contact details.

Note: Protection plans may be available for purchase separately through retailers. These plans are distinct from the manufacturer's warranty.