Vidapool SPT300-LV

Vidapool 3HP In/Above Ground Pool Pump with Timer

Model: SPT300-LV

1. Introduction

Thank you for choosing the Vidapool 3HP In/Above Ground Pool Pump with Timer. This manual provides essential information for the safe installation, efficient operation, and proper maintenance of your new pool pump. Please read all instructions carefully before installation and use to ensure optimal performance and longevity of the product.

2. Important Safety Instructions

WARNING: Failure to follow these instructions can result in serious injury or death.

  • Always disconnect power to the pump before performing any service or maintenance.
  • This pump is designed for permanent installation in swimming pools. Do not use with storable pools.
  • Ensure the electrical supply matches the pump's voltage (115V).
  • The pump must be installed by a qualified electrician and comply with all local and national electrical codes.
  • The power cord is 6 feet long and UL tested for safety. Do not use extension cords.
  • Built-in automatic thermal overload protection prevents motor overheating.
  • Do not operate the pump when the piping system is closed or blocked.
  • Keep children away from the pump and electrical connections.
Image showing a hand holding the UL-certified power cord for the Vidapool pool pump.

The Vidapool pool pump features a safe, UL-certified 6-foot power cord for reliable operation.

3. Product Overview

The Vidapool 3HP Pool Pump is a self-priming unit designed for efficient water circulation in both in-ground and above-ground pools. It features a powerful 3HP motor, an integrated timer, and a large filter basket.

Diagram of the Vidapool pool pump with numbered components including adapters, power cord, earthing terminal, timer, lid opener, filter basket, drain plug, and pure copper motor.

Detailed view of the Vidapool pool pump components.

Key Components:

  • 1.5" ID Adapters: For connecting to 1.5-inch piping.
  • 2" ID Adapters: For connecting to 2-inch piping.
  • Filter Basket: Collects debris before it reaches the pump impeller.
  • Drain Plug: For draining water from the pump housing.
  • Pure Copper Motor: Provides strong power for high flow and efficient circulation.
  • 6' Power Cord: UL-tested for safety and performance.
  • Earthing Terminal: For proper grounding.
  • Timer: Integrated control for setting run times.
  • Lid Opener: Tool for easy removal of the filter basket lid.
Close-up of the Vidapool pool pump motor, highlighting its continuous duty design.

The continuous duty motor ensures stable operation and ultra-low noise.

4. Setup and Installation

Proper installation is crucial for the pump's performance and safety. Ensure the pump is placed on a solid, level surface, protected from direct sunlight and excessive moisture.

4.1. Plumbing Connections

The pump includes two 1.25-inch and two 1.5-inch inlet and outlet adapters, compatible with Schedule 40 PVC pipe. You can choose between two connection methods:

  • Method 1: Direct 1.5-inch or 2-inch Schedule 40 PVC pipe glue connection.
  • Method 2: 1.5-inch or 2-inch Schedule 40 PVC pipe glue connection combined with a 2-inch PVC hose and clamp.
Diagram illustrating two methods for connecting the pool pump's inlet and outlet using PVC pipe and hose clamps.

Illustration of outlet/inlet connection methods.

Ensure all connections are watertight to prevent leaks and maintain pump efficiency. Use appropriate PVC cement for rigid pipe connections.

4.2. Electrical Connection

Connect the pump to a grounded 115V AC power outlet. The pump comes with a pre-attached UL-certified power cord. Do not modify the cord or use ungrounded adapters.

4.3. Priming the Pump

Before starting the pump for the first time, or after draining for maintenance, the pump must be primed:

  1. Ensure all valves are open and water can flow freely to the pump.
  2. Remove the filter basket lid.
  3. Fill the filter basket housing with water until it overflows.
  4. Replace the lid securely.
  5. Turn on the pump. It should self-prime within a few minutes. If not, repeat the process.

5. Operating Instructions

The Vidapool pump features an integrated timer for automated operation.

Close-up of the Vidapool pool pump's control panel, showing the timer settings and on/off switch.

The control panel allows for quick and easy timer setup.

5.1. Setting the Timer

The pump offers nine run-time options, from 2 to 24 hours. Once set, the pump will automatically activate at the current time each day for the selected duration.

  1. Determine the optimal run time based on your pool size and usage.
  2. Wait until the desired start time for the pump.
  3. Press the clock button on the control panel to select the running hours.
  4. The pump will now run for the set hours daily, starting at the time you programmed it.
Diagram showing steps to set the timer on the Vidapool pool pump, including calculating run time, waiting for start time, pressing the clock button, and automatic daily operation.

Visual guide for setting the pump's integrated timer.

5.2. Manual Operation

To operate the pump manually, use the ON/OFF switch on the control panel. The timer settings will be overridden during manual operation.

6. Maintenance

Regular maintenance ensures the longevity and efficient operation of your pool pump.

6.1. Cleaning the Filter Basket

The large filter basket collects debris such as leaves, hair, and grit. It should be checked and cleaned regularly, depending on pool usage and debris levels.

  1. Turn off the pump and disconnect power.
  2. Use the provided lid opener to unscrew and remove the filter basket lid.
  3. Lift out the filter basket.
  4. Empty all collected debris and rinse the basket thoroughly with water.
  5. Inspect the O-ring on the lid for damage and ensure it is clean.
  6. Place the clean basket back into the housing and securely fasten the lid.
  7. Reconnect power and prime the pump if necessary.
Image showing the detachable filter basket of the Vidapool pool pump, emphasizing its ease of cleaning.

The detachable filter basket design allows for easy inspection and cleaning of debris.

6.2. Winterization

In colder climates, the pump must be properly winterized to prevent freeze damage. Consult a pool professional for specific winterization procedures for your pool system.

7. Troubleshooting

This section addresses common issues you might encounter with your pool pump.

ProblemPossible CauseSolution
Pump does not startNo power supply; Thermal overload tripped; Motor seizedCheck power connection and circuit breaker; Allow motor to cool; Contact support if motor is seized.
Low water flowClogged filter basket; Air leak in suction line; Low water level in pool; Clogged impellerClean filter basket; Check and seal suction line connections; Add water to pool; Inspect and clean impeller.
Pump loses primeAir leak in suction line; Low water level; Loose connectionsCheck all connections for leaks; Ensure adequate pool water level; Re-prime the pump.
Excessive noise/vibrationAir in system; Loose mounting; Debris in impeller; Worn bearingsBleed air from system; Tighten mounting bolts; Clean impeller; Contact support for bearing issues.

If you are unable to resolve an issue using the troubleshooting guide, please contact customer support.

8. Specifications

Technical details for the Vidapool 3HP In/Above Ground Pool Pump with Timer (Model SPT300-LV).

Infographic displaying the specifications of the Vidapool pool pump, including HP, Max Head, Amp, Voltage, Qmax, and Discharge.

Key specifications of the Vidapool pool pump.

FeatureDetail
BrandVidapool
Model NumberSPT300-LV
Horsepower (HP)3 HP
Voltage115 Volts
Power SourceAC
Maximum Flow Rate149 Gallons Per Minute (8964 GPH)
Maximum Lifting Height70 Feet
MaterialCast Iron, Plastic
Inlet/Outlet AdaptersTwo 1.25-inch, Two 1.5-inch
Cord Length6 feet (UL tested)

9. Warranty and Support

9.1. Product Warranty

This Vidapool pool pump is backed by a two-year warranty from the date of purchase. This warranty covers manufacturing defects and ensures customer peace of mind and satisfaction. Please retain your proof of purchase for warranty claims.

9.2. Customer Support

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Vidapool customer service. Refer to the product packaging or the retailer's website for the most current contact information.

10. Official Product Video

Official Vidapool Pool Pump with Timer overview video. This video provides a visual guide to the pump's features and benefits, including its durable design and easy installation process.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.