1. Introduction and Important Safety Instructions
Thank you for choosing the Midea Ceramic Heater and Fan 2-in-1. This manual provides essential information for the safe and efficient operation of your appliance. Please read it thoroughly before use and keep it for future reference.
Important Safety Warnings:
- Always place the heater on a firm, level surface.
- Do not cover the heater or block air inlets/outlets.
- Keep flammable materials at least 3 feet (0.9 meters) away from the heater.
- This appliance is equipped with built-in safety features including Overheat Protection and Tip-over Protection, which automatically shut off the unit if it overheats or is accidentally knocked over.
- Constructed with V0 grade flame-retardant materials for enhanced safety.
- Do not use in bathrooms, laundry areas, or similar indoor locations where water may be present.
2. Package Contents
Please check the package for the following items:
- Midea Ceramic Heater and Fan Unit
- Remote Control
- User Manual (this document)
3. Product Overview
The Midea Ceramic Heater and Fan features a sleek tower design with an intuitive touch control panel and an LED display. It comes with a remote control for convenient operation.
4. Setup
4.1 Assembly
The heater may require minor assembly, typically attaching the base. Follow these steps:
- Carefully remove all components from the packaging.
- Align the heater body with the base, ensuring the power cord passes through the designated opening.
- Secure the base to the heater body using the provided screws (if any) and a screwdriver.
- Ensure the base is firmly attached before proceeding.
4.2 Placement
- Place the heater on a stable, flat, and heat-resistant surface.
- Ensure there is at least 3 feet (0.9 meters) of clear space around the heater to allow for proper airflow and prevent fire hazards.
- Do not place the heater directly below a power outlet.
- Plug the power cord into a grounded electrical outlet.
5. Operating Instructions
Your Midea Ceramic Heater and Fan can be operated using the touch control panel on the unit or the included remote control.
5.1 Power On/Off
- Press the Power button (⏻) on the control panel or remote to turn the unit on or off.
5.2 Mode Selection
Press the Mode button (M) to cycle through the available modes:
- Fan Mode: Circulates air without heating.
- Low Heat (900W): Provides gentle warmth.
- High Heat (1400W): Delivers maximum heating power.
- ECO Mode: Automatically adjusts heating power (900W or 1400W) based on the ambient temperature to maintain your set temperature and save energy.
5.3 Temperature Adjustment
In heating modes, use the Temperature Up (+) and Temperature Down (-) buttons to set your desired temperature between 5°C and 35°C.
5.4 Oscillation
Press the Oscillation button (⟳) to activate or deactivate the 75° oscillation function, which helps distribute heat evenly across a wider area (up to 20m²).
5.5 Timer Function
Press the Timer button (◷) to set an automatic shut-off timer for up to 24 hours. Each press typically increases the timer by one hour.
6. Maintenance
Regular cleaning and proper storage will ensure the longevity and efficient operation of your heater.
6.1 Cleaning
- Always unplug the heater and allow it to cool completely before cleaning.
- Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Use a vacuum cleaner with a brush attachment to gently clean the air intake and outlet grilles to remove dust and debris.
- Do not immerse the heater in water or allow water to drip into the interior.
6.2 Storage
- When not in use, store the heater in a cool, dry place, preferably in its original packaging.
- Avoid placing heavy objects on top of the heater during storage.
7. Troubleshooting
If you encounter issues with your heater, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | No power, unit unplugged, power switch off, safety feature activated. | Ensure unit is plugged in and power switch is on. Check circuit breaker. If tipped over or overheated, unplug, wait 30 minutes, and restart. |
| No heat output. | Unit in Fan mode, temperature setting too low. | Select a heating mode (Low or High). Increase the set temperature above the ambient room temperature. |
| Unit stops unexpectedly. | Overheat protection or tip-over switch activated, timer expired. | Check for obstructions. Unplug and allow to cool for 30 minutes. Ensure unit is upright. Check timer settings. |
| Remote control not working. | Batteries depleted, obstruction, remote out of range. | Replace batteries. Ensure clear line of sight to the heater's sensor. Move closer to the unit. |
If the problem persists after trying these solutions, please contact Midea customer support.
8. Specifications
- Model: B0DK5D9CBQ
- Power Output: 1500W (Max), 1400W (High Heat), 900W (Low Heat)
- Modes: Fan, Low Heat, High Heat, ECO
- Temperature Range: 5°C - 35°C
- Oscillation: 75°
- Coverage Area: Up to 16-20 m²
- Noise Level: <55dB
- Heating Method: Convection
- Dimensions (approx.): 58 cm (Height), 18 cm (Base Width), 17.6 cm (Base Depth)
- Item Weight: 2.44 kg
- Safety Features: Overheat Protection, Tip-over Protection, V0 Flame-retardant Materials, 24-hour Timer
9. Warranty and Support
9.1 Manufacturer's Warranty
For information regarding the manufacturer's warranty, please refer to the documentation included with your product or visit the official Midea website. Extended warranty options may be available from third-party providers.
9.2 Customer Support
If you have any questions, require technical assistance, or need to report a problem, please contact Midea customer support through their official website or the contact information provided in your product documentation.
