arboleaf SP10A

Arboleaf SP10A Rechargeable Upper Arm Blood Pressure Monitor User Manual

Model: SP10A | Brand: arboleaf

Introduction

This manual provides detailed instructions for the safe and effective use of your Arboleaf SP10A Rechargeable Upper Arm Blood Pressure Monitor. Please read this manual thoroughly before using the device and keep it for future reference. This device is designed for home use to measure systolic and diastolic blood pressure and pulse rate.

What's Included

Your Arboleaf SP10A Blood Pressure Monitor package includes the following items:

  • Blood Pressure Monitor (Main Unit)
  • 1 Wide Range Cuff (8.7"-18.9")
  • USB Charging Cable (Type-C)
  • Instruction Manual
  • Storage pouch

Setup Guide

Follow these steps to set up your Arboleaf SP10A Blood Pressure Monitor:

  1. Charge the Device: Before first use, fully charge the blood pressure monitor using the provided USB Type-C cable. The built-in 2000mAh rechargeable battery can last for weeks on a single charge.
  2. Connect the Cuff: Locate the cuff connection port on the side of the main unit. Firmly insert the air tube connector from the cuff into this port.
  3. Download the Arboleaf App: For advanced tracking and data management, download the "Arboleaf" app from your smartphone's app store (available on Apple App Store and Google Play).
  4. Pair with App (Bluetooth):

    1. Ensure Bluetooth is enabled on your smartphone.

    2. Open the Arboleaf app and navigate to the "Devices" section.

    3. Select "Add device" and choose "Smart Blood Pressure Monitor".

    4. Press the Blood Pressure Monitor button on the device to initiate pairing. The app will guide you through the connection process.

    5. Once successfully paired, you can configure Wi-Fi syncing within the app if desired (requires a logged-in account).

Arboleaf Blood Pressure Monitor main unit and cuff

Image: Arboleaf SP10A Blood Pressure Monitor with cuff and accessories.

Setup and Operation Video:

Operating Instructions

Before Taking a Measurement:

  • Rest for at least 5 minutes before measurement.
  • Avoid eating, drinking, bathing, or exercising for 30 minutes prior.
  • Sit upright with your back supported, feet flat on the floor, and legs uncrossed.
  • Place your arm on a flat surface so the cuff is at heart level.

Applying the Cuff:

  1. Slide the cuff onto your upper arm.
  2. Ensure the lower edge of the cuff is about one inch (2-3 cm) above the elbow.
  3. The cuff should be tight enough to insert two fingers comfortably between the cuff and your arm.
  4. The air tube should run down the center of your arm.
Person applying the blood pressure cuff correctly

Image: Proper cuff placement on the upper arm, 2-3 cm above the elbow.

Taking a Measurement:

  1. Press the Start/Stop button (power button) to begin the measurement.
  2. Remain still and avoid any movement or talking during the measurement process.
  3. The cuff will inflate and then slowly deflate. The monitor will display your systolic, diastolic, and pulse readings.
  4. The large color display provides clear results in various lighting conditions.
Arboleaf Blood Pressure Monitor displaying results

Image: The monitor displaying blood pressure and pulse readings on its large color screen.

Product Overview and Usage Video:

Dual User Mode:

The monitor supports two users, storing 99 readings for each. Use the User 1/2 buttons to switch between user profiles before taking a measurement. This ensures individual tracking of blood pressure trends.

App Synchronization:

After a measurement, the readings will automatically sync to the Arboleaf app via Bluetooth. In the app, you can:

  • View detailed measurement results and insights.
  • Track daily, weekly, and monthly trends.
  • Share data with healthcare providers.
  • Set reminders for regular monitoring.
Arboleaf app interface showing blood pressure trends

Image: Screenshot of the Arboleaf app displaying blood pressure tracking and trends.

Maintenance

  • Cleaning: Wipe the monitor and cuff with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
  • Charging: Recharge the device when the battery indicator shows low power. A full charge typically lasts for up to six months with twice-daily use.
  • Storage: Store the device and cuff in the provided storage pouch in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

ProblemPossible CauseSolution
No power/Device won't turn onLow battery or device is off.Charge the device using the USB-C cable. Press the power button firmly.
Inaccurate readingsIncorrect cuff placement, movement during measurement, talking, or not resting before measurement.Ensure correct cuff placement (2-3 cm above elbow, snug fit). Remain still and silent. Rest for 5 minutes before measuring.
Cuff not inflating/deflating properlyAir tube not securely connected, or cuff is damaged.Check that the air tube is firmly inserted into the monitor. Inspect cuff for damage.
Bluetooth pairing failureBluetooth off on phone, app not open, or device not in pairing mode.Ensure phone Bluetooth is on. Open Arboleaf app. Press the monitor button to activate pairing mode.

Specifications

  • Model Number: SP10A
  • Product Dimensions: 5.91 x 3.23 x 4.72 inches
  • Item Weight: 13.92 ounces (0.87 Pounds)
  • Cuff Size: Wide Range Cuff (8.7"-18.9")
  • Power Source: Battery Powered (1 Lithium Ion battery included)
  • Battery Capacity: 2000mAh (rechargeable)
  • Display Type: Large Color LCD
  • Memory: 99 readings for each of two users
  • Connectivity: Bluetooth, Wi-Fi (for logged-in app accounts)
  • Manufacturer: arboleaf
  • UPC: 850059066546

Important Safety Information

This device is intended for home use and should not replace professional medical advice or treatment. Consult your physician for interpretation of blood pressure readings. Self-diagnosis and treatment based on measurement results can be dangerous. Always follow your doctor's instructions.

Keep the device out of reach of children. Do not use the device on infants or individuals who cannot express consent. Do not use the device in a moving vehicle. Avoid using the device near strong electromagnetic fields.

Warranty and Support

Arboleaf provides 12 or 36 months of technical support for this product. For any inquiries or assistance, please contact Arboleaf customer service. Arboleaf is a Texas-based small business offering design and service support.

For further support, visit the official Arboleaf store: Arboleaf Store on Amazon.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.