VECELO Twin Over Twin Metal Bunk Bed Instruction Manual

1. Important Safety Information

Please read and understand all instructions before assembling and using this bunk bed. Failure to follow these instructions may result in serious injury.

• Weight Capacity: Do not exceed the maximum weight capacity of 400 lbs (181 kg) per bunk.
• Assembly: Always follow the assembly instructions carefully to prevent instability. Ensure all parts and screws are firmly attached before use.
• Guardrails: The top bunk is equipped with guardrails. Ensure they are properly installed and maintained.
• Mattress Thickness: The mattress surface of the top bed must be at least 5 inches (127mm) below the top edge of the guardrail. Recommended mattress thickness is less than 8 inches.
• Ladder Safety: Use the provided ladders for entry and exit from the top bunk. Do not jump on or off the bunk bed.
• Anti-Tipping Device: Utilize the included anti-tipping device to fix the bed to the wall for increased stability.
• Children: The top bunk is not suitable for children under 6 years of age.
• Ventilation: Ensure adequate ventilation around the bed.
• Modifications: Do not modify the bunk bed structure. Use only manufacturer-approved replacement parts.

Figure 1: Safety Guardrails and Side Ladders. The image highlights the 11-inch high guardrails on the top bunk and the two side ladders for safe access.

Figure 2: Anti-Tipping Device and Noise-Free Slats. This image illustrates how the anti-tipping device secures the bed to the wall and the plastic buckles designed to prevent slat noise.

2. Package Contents

Before beginning assembly, ensure all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer service.

• 1 x VECELO Twin Over Twin Metal Bunk Bed Frame (all structural components)
• 1 x Assembly Instruction Manual (this document)
• 1 x Assembly Kit (includes all necessary screws, bolts, and tools like an Allen wrench)
• 1 x Anti-Tipping Device

3. Assembly Instructions

Assembly typically requires two adults. Please follow the steps carefully. All parts are clearly labeled for ease of installation.

3.1 Preparation

• Clear a spacious area for assembly.
• Unpack all components and verify against the package contents list.
• Keep children and pets away from the assembly area.

3.2 Step-by-Step Assembly

1. Assemble Bed Frames: Begin by assembling the two individual bed frames. Attach the side rails to the headboards and footboards using the provided hardware. Do not fully tighten screws until all components are in place.
2. Install Slat Supports: Insert the metal slats into the designated slots on both bed frames. Ensure the plastic buckles are used to fasten the slats firmly, which helps prevent noise.
3. Stack Beds (for Bunk Bed Configuration): Carefully lift the top bed frame and place it onto the lower bed frame, aligning the connecting posts. Secure them using the appropriate hardware.
4. Attach Ladders: Securely attach the two side ladders to the bunk bed structure.
5. Install Guardrails: Ensure the full-length guardrails for the top bunk are correctly installed and tightened.
6. Tighten All Hardware: Once all components are in place and aligned, systematically tighten all screws and bolts. Do not overtighten.
7. Install Anti-Tipping Device: For enhanced stability, attach the anti-tipping device to the bunk bed and secure it to a wall stud according to the separate instructions provided with the device.

Figure 3: Bunk Bed Dimensions and Mattress Recommendation. This diagram provides key measurements of the assembled bunk bed and specifies that the mattress thickness should be less than 8 inches.

4. Operating Instructions

4.1 Bunk Bed Configuration

The VECELO Twin Over Twin Metal Bunk Bed is designed to provide two sleeping surfaces in a compact footprint. The top bunk is accessed via the integrated side ladders. Ensure guardrails are always in place when using the top bunk.

4.2 Convertible Feature (2-in-1 Design)

This bunk bed can be separated into two individual twin beds. To convert:

1. Remove mattresses from both bunks.
2. Carefully detach the top bunk from the lower bunk by unscrewing the connecting hardware.
3. Remove the ladders and guardrails.
4. Position the two individual twin beds as desired.

Figure 4: Convertible Design. This image demonstrates the flexibility of the VECELO bunk bed, allowing it to be used as a stacked bunk bed or separated into two individual twin beds.

4.3 Under-Bed Storage

The bunk bed provides approximately 13 inches of under-bed clearance, offering space for storage bins, toys, or other items to help keep the room organized.

Figure 5: Under-Bed Storage. This image highlights the 13-inch clearance beneath the lower bunk, suitable for storing various items.

5. Maintenance

• Cleaning: Wipe down the metal frame with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Hardware Check: Periodically check all bolts and screws to ensure they remain tight. Retighten if necessary to maintain stability and prevent squeaking.
• Slat Integrity: Inspect the bed slats regularly for any signs of damage or displacement. Ensure the plastic buckles are securely holding the slats to prevent noise.

6. Troubleshooting

7. Specifications

• Brand: VECELO
• Model: bunk beds
• Type: Twin Over Twin Bunk Bed
• Material: Metal
• Color: White (other colors may be available)
• Product Dimensions (L x W x H): 78" x 41.5" x 65" (198 cm x 105 cm x 165 cm)
• Guardrail Height: 11 inches (28 cm)
• Under-Bed Clearance: 13 inches (33 cm)
• Weight Capacity (Per Bunk): 400 lbs (181 kg)
• Mattress Recommendation: Less than 8 inches thick (top bunk mattress surface must be at least 5 inches below guardrail top)
• Box Spring Required: No
• Assembly Required: Yes
• UPC: 840408949286
• ASIN: B0DK4W9Y7H

8. Warranty and Customer Support

For any questions, concerns, or assistance with your VECELO Twin Over Twin Metal Bunk Bed, please contact our customer service team.

• Customer Service Email: Please refer to your purchase documentation or the VECELO official website for the most current contact information.
• Warranty Information: Details regarding product warranty are typically included with your purchase receipt or available on the VECELO official website. Please retain your proof of purchase for warranty claims.