1. Introduction
Thank you for choosing the AZDOME PG18S Mirror Dash Cam. This device is designed to provide reliable front and rear vehicle recording, enhancing your driving safety and providing evidence in case of incidents. This manual will guide you through the installation, operation, and maintenance of your dash cam.
2. Product Overview
Key Features
- Split Front Camera Design: The front camera is separate from the mirror monitor, allowing for flexible installation and optimal viewing angles.
- High-Resolution Recording: 4K Ultra HD front camera and 1080P Full HD rear camera for clear video capture.
- 12-inch IPS Full Touch Screen: Large, responsive display for easy navigation and real-time viewing.
- WDR Night Vision: Wide Dynamic Range technology with Sony IMX335 sensor and F1.8 wide aperture for clear recordings in low-light conditions.
- GPS Tracking: Records vehicle information accurately, viewable on PC via AZDOME Player.
- 24-Hour Parking Monitoring: Features impact detection and time-lapse recording for continuous surveillance (requires 3A hardwire kit, ASIN: B09KPSBZNY).
- Loop Recording: Automatically overwrites the oldest unlocked footage when the SD card is full.
- G-Sensor: Automatically locks footage upon sudden impact or collision.
- Parking Assist Lines: Displays guide lines for safe parking when reversing.
Package Contents
Verify that all items are present in your package:
- AZDOME PG18S Mirror Dash Cam (Main Unit)
- Front Camera (1.2m cable)
- Rear Camera (6.6m cable)
- GPS Module
- USB Car Charger
- 2-in-1 Connection Cable
- Anti-glare Screen Film
- Installation Tool Kit (cable clips, prying tool)
- Cleaning Cloth
- User Manual
- 64GB MicroSD Card
- Rubber Straps (4 pieces)
Image: Contents of the AZDOME PG18S package, including the mirror dash cam, front and rear cameras, GPS module, cables, and accessories.
3. Setup
3.1 Installing the Dash Cam
- Mount the Mirror Dash Cam: Secure the main mirror unit over your vehicle's existing rearview mirror using the provided rubber straps. Ensure it is firmly attached and does not obstruct your view.
- Install the Front Camera: The front camera is separate. Mount it on your windshield, typically near the top center, ensuring it has a clear view of the road ahead. Connect its cable to the main mirror unit. The flexible design allows for mounting on either the left or right side of the mirror.
- Install the Rear Camera: Mount the rear camera on the rear windshield or near the license plate. The rear camera is IP66 waterproof, allowing for external mounting if preferred. Route the rear camera cable to the main mirror unit and connect it.
- Connect the GPS Module: Attach the GPS module to the main unit and place it on the dashboard or windshield where it has a clear view of the sky for optimal signal reception.
- Power Connection: Connect the USB car charger to your vehicle's cigarette lighter socket and route the power cable to the main mirror unit. Ensure cables are neatly tucked away using the provided cable clips and prying tool to avoid obstructing driving.
Image: Diagram illustrating the easy installation process of the AZDOME PG18S, showing the mirror unit, front camera, and rear camera wiring paths within a car interior.
Image: Illustration showing the separate front camera design of the AZDOME PG18S, highlighting its 360-degree rotation and 150-degree wide angle, with examples of left and right side mounting options.
3.2 Initial Setup
- Insert MicroSD Card: Before powering on, insert the provided 64GB microSD card (or another compatible card up to 256GB) into the designated slot on the main unit.
- Power On: Once connected to power, the dash cam will automatically power on and begin recording.
- Format SD Card: It is recommended to format the microSD card within the device settings upon first use and periodically thereafter to ensure optimal performance.
4. Operating Instructions
4.1 Basic Operation
- Power On/Off: The device powers on automatically with vehicle ignition and powers off when the ignition is turned off. You can also manually power it on/off using the power button.
- Recording: The dash cam automatically starts loop recording when powered on.
- Screen On/Off: Tap the screen to turn it on or off. The screen can be set to automatically turn off after a set period to avoid distraction while recording continues in the background.
4.2 Touch Screen Functions
The 12-inch IPS touch screen allows for intuitive control:
- View Adjustment: Swipe up or down on the screen to adjust the vertical viewing angle of the camera.
- Camera Switching: Swipe left or right to switch between front camera view, rear camera view, or a split-screen display showing both.
- Menu Access: Tap the screen to reveal on-screen icons for settings, playback, and other functions.
Image: Demonstrates the 12-inch IPS full touch screen of the AZDOME PG18S, showing how to adjust the view vertically and switch between front, rear, and combined camera displays.
4.3 Advanced Features
- G-Sensor: The built-in G-sensor detects sudden impacts or collisions and automatically locks the current video segment to prevent it from being overwritten by loop recording. The sensitivity can be adjusted in the settings.
- Loop Recording: Videos are recorded in segments (e.g., 1, 3, or 5 minutes). When the memory card is full, the oldest unlocked file is automatically deleted to make space for new recordings.
- WDR Night Vision: This feature enhances video quality in low-light or high-contrast environments, ensuring clearer recordings at night or in tunnels.
Image: Compares video quality with WDR ON and WDR OFF, showing improved clarity and detail in night scenes when WDR is active on the AZDOME PG18S.
- GPS Tracking: The GPS module records your driving route, speed, and other vehicle data. This information can be viewed on a computer using the dedicated AZDOME GPS Player software.
Image: Illustrates the GPS tracking feature of the AZDOME PG18S, showing how vehicle data and route information are displayed on a computer via the AZDOME GPS Player.
- Parking Monitoring: To enable 24-hour parking monitoring, a 3A hardwire kit (ASIN: B09KPSBZNY) is required. This feature includes:
- Impact Detection Parking Mode: The dash cam will automatically start recording if an impact is detected while parked.
- Time-Lapse Parking Mode: Records continuously at a low frame rate (e.g., 1 frame per second) to save storage space and provide a comprehensive overview of events while parked.
Image: Depicts the 24-hour parking monitoring feature of the AZDOME PG18S, showing both impact detection and time-lapse recording modes for vehicle security.
- Parking Guide Function: When reversing, the rear camera view will display parking assist lines on the screen to help you park safely.
Image: Shows the safe parking guide function of the AZDOME PG18S, with parking assist lines overlaid on the rear camera view to aid in reversing.
5. Maintenance
- MicroSD Card Care: Regularly format the microSD card (at least once a month) to prevent data corruption and ensure smooth recording. Use a high-quality Class 10 or U3 microSD card for optimal performance. Replace the card if it shows signs of degradation or errors.
- Cleaning the Device: Use a soft, dry cloth to clean the mirror screen and camera lenses. For stubborn smudges, slightly dampen the cloth with water. Avoid using harsh chemicals or abrasive materials.
- Firmware Updates: Check the official AZDOME website periodically for firmware updates. Updating the firmware can improve performance, add new features, or fix bugs. Follow the instructions provided with the firmware update carefully.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dash cam does not power on. | No power supply; faulty power cable. | Check power connection to the car charger and the dash cam. Ensure the car charger is working. |
| Recording stops unexpectedly. | SD card full; SD card error; low power. | Format the SD card. Replace the SD card if corrupted. Ensure continuous power supply. |
| Video footage is blurry or unclear. | Camera lens dirty; protective film still on lens; incorrect focus. | Clean the camera lenses. Remove any protective film. Ensure the camera is securely mounted. |
| Screen is dark or difficult to see. | Screen brightness setting; strong reflections. | Adjust screen brightness in settings. Consider using the anti-glare screen film. |
| GPS signal not found. | GPS module obstructed; poor satellite reception. | Ensure the GPS module has a clear view of the sky. Relocate the module if necessary. |
| Smart key interference. | Electromagnetic interference from dash cam. | Ensure proper grounding of the dash cam's power supply. If interference persists, contact support. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | AZDOME |
| Model Name | AZDOME PG18S |
| Screen Size | 12 inches |
| Display Type | LCD (IPS Full Touch Screen) |
| Control Method | Touch |
| Front Camera Resolution | 4K Ultra HD |
| Rear Camera Resolution | 1080P Full HD |
| Field of View | 150° Wide Angle (Front) |
| Image Sensor | Sony IMX335 |
| Maximum Aperture | F2.8 |
| Flash Memory Type | microSD |
| Included Memory Card Capacity | 64 GB |
| Maximum Memory Card Support | 256 GB |
| Mounting Type | Rearview Mirror Mount |
| Special Features | G-sensor, Touch screen, Loop recording, Night vision (WDR), GPS, Parking Monitoring (with hardwire kit) |
| Product Dimensions (D x W x H) | 3 x 31 x 11 cm |
| Battery Included | No |
8. Warranty and Support
Warranty Information
The AZDOME PG18S Mirror Dash Cam comes with a one-year free warranty. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.
Customer Support
If you encounter any issues with your product, or if it is initially defective or malfunctions, please do not hesitate to contact AZDOME customer support. We are committed to providing prompt assistance and resolving any concerns you may have.
For support, please visit the official AZDOME website or contact us through the platform where you purchased the product.
