1. Introduction
Thank you for choosing the ONSTUY LED Wall Sconce. This versatile, battery-operated wall light features a 2000mAh rechargeable battery, three adjustable color temperatures (2700K, 4000K, 5700K), and dimmable brightness levels. Its magnetic 360° rotation capability allows for flexible lighting direction, making it ideal for various indoor applications such as bedrooms, living rooms, and reading areas. This manual provides essential information for the safe and effective use of your new wall sconce.
2. Safety Information
- Do not look directly at the light source when it is on, as it may cause eye discomfort.
- Keep the device away from water and high humidity environments.
- Do not attempt to disassemble or modify the product. Repairs should only be performed by qualified personnel.
- Use only the provided Type-C charging cable or a compatible certified cable for charging.
- Ensure the mounting surface is clean, dry, and stable before installation.
- Dispose of batteries according to local regulations.
3. What's in the Box
Verify that all components are present:
- ONSTUY LED Wall Sconce (1 unit)
- Magnetic Base with Adhesive Strip
- Mounting Hardware (Screws)
- Type-C USB Charging Cable
4. Setup and Installation
4.1 Initial Charging
Before first use, fully charge the LED Wall Sconce. Connect the provided Type-C USB charging cable to the charging port on the light and plug the other end into a standard USB power adapter (not included). The charging time is approximately 3-4 hours. The indicator light will change to show charging status (e.g., red for charging, green for fully charged).
Image: The ONSTUY LED Wall Sconce showing its Type-C charging port, with a hand holding the charging cable, illustrating the charging method.
4.2 Mounting the Sconce
The ONSTUY LED Wall Sconce offers two installation methods:
- Adhesive Mounting:
- Clean the desired wall surface thoroughly to ensure it is free of dust and grease.
- Peel off the protective film from the strong adhesive strip on the back of the magnetic base.
- Press the magnetic base firmly onto the wall for at least 30 seconds. Allow 24 hours for the adhesive to fully cure before attaching the light.
- Once the base is secure, the light can be magnetically attached to the spherical part of the base.
- Screw Mounting:
- Identify the desired mounting location on the wall.
- Use the magnetic base as a template to mark the screw holes.
- Drill pilot holes if necessary, then secure the magnetic base to the wall using the provided screws.
- Attach the light magnetically to the spherical part of the base.
Image: An illustration demonstrating the strong magnetic suction of the light to its base, the 360-degree rotation capability, and the strong adhesive on the back of the mounting plate for easy installation.
5. Operating Instructions
The ONSTUY LED Wall Sconce is controlled via a touch-sensitive button on its surface.
5.1 Power On/Off and Brightness Adjustment
- Short Press: A short press of the power button will cycle through brightness levels: Low Light > Medium Light > High Light > Off.
5.2 Color Temperature Adjustment
- Long Press: A long press of the power button will cycle through the three color temperatures: 2700K (Warm Light) > 4000K (Natural Light) > 5700K (White Light).
The light features a memory function, remembering the last used brightness and color temperature settings when turned back on.
Image: A detailed diagram illustrating the touch control functionality of the ONSTUY LED Wall Sconce, showing how a long press changes color temperature (2700K, 4000K, 5700K) and a short press adjusts brightness (low, medium, high).
5.3 Adjusting Light Direction
The light head is attached to the magnetic base with a 360° rotating magnetic ball. This allows you to easily adjust the direction of the light beam to suit your needs, whether for direct illumination or ambient lighting.
Image: The ONSTUY LED Wall Sconce mounted on a wall, demonstrating its ability to direct light. Below, three smaller images show the light output at different color temperatures and brightness levels.
5.4 Portable Use
Due to its magnetic design, the light can be easily detached from its base and used as a portable light source, such as a night light, reading light, or emergency light.
Image: A woman comfortably reading in bed, illuminated by the ONSTUY LED Wall Sconce mounted on the wall above her, demonstrating its use as a bedside reading light.
6. Maintenance
6.1 Cleaning
To clean the light, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
6.2 Battery Care
- Recharge the battery when the light output becomes dim or the light stops working.
- Avoid completely draining the battery frequently to prolong its lifespan.
- If storing the light for an extended period, charge it to approximately 50% every 3-6 months to prevent deep discharge.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Battery is depleted. | Charge the light fully using the Type-C cable. |
| Light is dim or flickers. | Low battery. | Recharge the light. |
| Light does not charge. | Charging cable or adapter issue; faulty battery. | Try a different Type-C cable and USB power adapter. If the issue persists, contact customer support. |
| Light falls from the wall. | Adhesive not cured; surface not clean; magnetic base not properly secured. | Ensure the surface is clean and dry. Allow 24 hours for adhesive to cure. For a more secure installation, use the provided screws. |
| Cannot change color temperature or brightness. | Incorrect touch operation. | Ensure you are performing a short press for brightness and a long press for color temperature. |
8. Specifications
| Brand | ONSTUY |
| Model Name | ON-CXBD-HS1P |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Color | Black |
| Product Dimensions | 2.5"L x 2.5"W x 1.5"H |
| Item Weight | 8.4 ounces |
| Power Source | Battery Powered |
| Battery Capacity | 2000mAh (Rechargeable) |
| Charging Time | Approx. 3-4 hours |
| Working Time (Min Brightness) | At least 15 hours |
| Working Time (Max Brightness) | More than 6 hours |
| Light Source Type | LED |
| Color Temperatures | 2700K (Warm), 4000K (Natural), 5700K (White) |
| Brightness | 200 lumen |
| Wattage | 4.5 watts |
| Control Method | Touch |
| Special Features | Adjustable Color Temperature, Dimmable, Magnetic 360° Rotation, Cordless |
| Indoor/Outdoor Usage | Indoor |
9. Warranty and Support
9.1 Warranty Information
This ONSTUY product comes with a Limited Warranty. Please refer to the product packaging or the official ONSTUY website for specific warranty terms and conditions.
9.2 Customer Support
For any questions, technical assistance, or warranty claims, please contact ONSTUY customer support through the retailer's platform where you purchased the product or visit the official ONSTUY website for contact information.