1. Introduction and Overview
The Marstek CT002 3-Phase Smart Meter provides a precise and reliable method for real-time monitoring and control of your household's electricity consumption. This device is specifically designed for use with Marstek VENUS, JUPITER, and SATURN series energy storage systems.
With its three-phase measurement capability, the CT002 detects the power requirements of your consumers across all phases with an accuracy of ±1%. Integrated WLAN and Bluetooth functions allow the device to wirelessly transmit measurement data to your energy management system. This provides a continuous overview of your self-consumption, grid feed-in, and overall energy flow within your household.
The Smart Meter is installed directly into your electrical distribution board on a DIN rail. For safety and functionality, installation should be performed exclusively by a qualified electrician.

Figure 1: Marstek CT002 Smart Meter, showing its compact design and connection points.
A key advantage of the CT002 is its intelligent control over the charging and discharging processes of your storage solution. Based on the actual demand of your devices, the meter dynamically adjusts energy distribution for higher efficiency, greater self-sufficiency, and lower energy costs.
2. Key Features
- Precise 3-Phase Measurement: Accurately measures electricity consumption with ±1% accuracy, ideal for households with photovoltaic systems.
- Seamless Integration: Compatible with Marstek VENUS, JUPITER, and SATURN storage systems for intelligent energy management.
- Real-time Monitoring: Monitor your energy flows live via WLAN or Bluetooth.
- Secure Installation: Designed for DIN rail mounting in the electrical distribution board; professional installation by an electrician is recommended.
- Intelligent Energy Distribution: Automatically optimizes charging and discharging strategies based on actual consumption.
3. Package Contents
Please check the package contents upon receipt to ensure all components are present:
- 1x Marstek CT002 Smart Meter
- 3x Current Transformers
4. Safety Information
WARNING: Electrical installation should only be performed by a qualified and licensed electrician. Failure to comply may result in electric shock, fire, or serious injury.
- Always disconnect power before installation, maintenance, or troubleshooting.
- Ensure the device is installed in a dry, well-ventilated area, protected from direct sunlight and extreme temperatures.
- Do not expose the device to water or moisture.
- Do not attempt to open or repair the device yourself. Refer all servicing to qualified personnel.
- Ensure all wiring connections are secure and comply with local electrical codes.
5. Setup and Installation
The Marstek CT002 Smart Meter is designed for DIN rail installation within your electrical distribution board.
5.1. Pre-installation Checklist
- Ensure power to the distribution board is completely shut off.
- Verify you have all necessary tools and safety equipment.
- Confirm the installation location is suitable (DIN rail, sufficient space, appropriate environmental conditions).
5.2. Installation Steps
- Mount the CT002 Smart Meter onto the DIN rail in your electrical distribution board.
- Connect the voltage inputs (VA, VB, VC, VN) from your three-phase system to the corresponding terminals on the CT002.
- Install the three current transformers (CTs) around the respective phase conductors (L1, L2, L3) that you wish to monitor. Ensure the direction of the CTs is correct (usually indicated by an arrow on the CT, pointing towards the load).
- Connect the output wires from each current transformer to the designated CT input terminals on the CT002.
- Double-check all wiring connections for tightness and correctness.
- Once all connections are secure, restore power to the distribution board. The device should power on and indicate its status.

Figure 2: The Marstek CT002 Smart Meter securely mounted on a DIN rail, ready for wiring.

Figure 3: Example of the CT002 Smart Meter installed and wired within an electrical distribution box, showing connections to circuit breakers.
6. Operating Instructions
After successful installation, the CT002 Smart Meter will begin measuring energy data. To access and manage this data, you will need to connect the device to your energy management system via WLAN or Bluetooth.
6.1. Initial Setup and App Connection
- Download the official Marstek energy management application from your smartphone's app store.
- Open the app and follow the on-screen instructions to add a new device.
- The app will guide you through connecting to the CT002 via Bluetooth for initial configuration, then setting up its WLAN connection to your home network.
- Once connected, the device will transmit real-time data to the app.

Figure 4: A smartphone screen showing the Marstek application interface, displaying real-time energy consumption data for each phase.
6.2. Monitoring Energy Data
Through the Marstek app, you can monitor various energy parameters:
- Total Power: Overall energy consumption or generation.
- Phase-specific Power: Individual power readings for Phase A, Phase B, and Phase C.
- Historical Data: View daily, weekly, or monthly energy trends.
- Grid Feed-in/Consumption: Understand the flow of energy to and from the grid.
6.3. Intelligent Energy Management
The CT002, in conjunction with Marstek VENUS, JUPITER, and SATURN storage systems, enables intelligent energy management. Based on real-time consumption data, the system can:
- Optimize battery charging from solar PV or grid.
- Control battery discharging to power household loads.
- Maximize self-consumption and minimize reliance on grid power.
7. Maintenance
The Marstek CT002 Smart Meter is designed for minimal maintenance. However, regular checks can ensure optimal performance and longevity.
- Cleaning: Periodically wipe the device with a soft, dry cloth to remove dust. Do not use liquid cleaners or solvents.
- Connection Check: Annually, or if issues arise, have a qualified electrician check all wiring connections within the distribution board to ensure they remain secure.
- Firmware Updates: Check the Marstek app or website for any available firmware updates for the CT002. Keeping the firmware updated can improve performance and add new features.
8. Troubleshooting
If you encounter issues with your Marstek CT002 Smart Meter, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not powering on. | No power supply; incorrect wiring. | Ensure power is restored to the distribution board. Have an electrician check wiring connections. |
| Cannot connect via Bluetooth. | Bluetooth disabled on phone; device not in pairing mode; interference. | Ensure Bluetooth is enabled on your phone. Try restarting the app and the CT002 (by cycling power). Move closer to the device. |
| Unstable WLAN connection. | Weak Wi-Fi signal; network interference; incorrect Wi-Fi password. | Ensure the CT002 is within Wi-Fi range. Check Wi-Fi password in the app. Try restarting your router. Reduce interference from other devices. |
| Inaccurate readings. | Incorrect CT installation direction; faulty CT; device malfunction. | Have an electrician verify the CT installation direction and connections. If problem persists, contact Marstek support. |
| App not displaying data. | No internet connection on phone; app glitch; device not transmitting. | Check your phone's internet connection. Restart the app. Verify the CT002 has a stable WLAN connection. |
If the problem persists after trying these solutions, please contact Marstek customer support for further assistance.
9. Specifications
| Parameter | Value |
|---|---|
| Model | TPM-100CTW (CT002) |
| Measurement Type | 3-phase (up to 100 A per phase) |
| Measurement Accuracy | ±1 % |
| Voltage Range | 100–260 V AC |
| Communication | WLAN (802.11 b/g/n), Bluetooth 5.2 |
| Protection Class | IP20 |
| Installation Type | DIN rail |
| Dimensions (L x W x H) | 65.4 x 26.5 x 83 mm |
| Device Power Consumption | <2 W |
| Operating Temperature | –20 °C to +40 °C |
| Weight | 200 g |
10. Warranty and Support
For information regarding the product warranty, technical support, and customer service, please refer to the official Marstek website or contact your point of purchase. Specific warranty terms and conditions may vary by region.
Always ensure you have your product model number (CT002 / TPM-100CTW) and purchase details ready when contacting support.