1. Introduction
The JBL Tune Beam 2 are wireless Bluetooth earbuds designed to deliver powerful JBL Pure Bass sound with advanced features for an enhanced listening experience. These earbuds incorporate Adaptive Noise Cancellation to minimize distractions and Smart Ambient technology to keep you aware of your surroundings. With a long-lasting battery, robust water and dust resistance, and seamless multipoint connectivity, the JBL Tune Beam 2 are suitable for various environments and activities.
Image 1.1: JBL Tune Beam 2 earbuds and charging case.
2. What's in the Box
Your JBL Tune Beam 2 package includes the following components:
- 1 pair of JBL Tune Beam 2 earbuds
- 1 USB Type-C charging cable
- 3 sizes of ear tips (small, medium, large)
- 1 charging case
- 1 warranty/warning booklet
- 1 quick start guide/safety sheet
Image 2.1: Included accessories: USB-C charging cable and ear tips.
3. Setup
3.1. Initial Pairing
- Ensure the earbuds are charged.
- Open the charging case. The earbuds will automatically enter pairing mode.
- On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
- Select "JBL Tune Beam 2" from the list to connect.
For Android 6.0+ devices, Fast Pair is supported for quick connection. For Microsoft Windows 10 v1803+ devices, Swift Pair is supported.
3.2. JBL Headphones Application
Download the JBL Headphones app from your device's app store to customize your listening experience. The app allows for sound adjustments, control over noise cancellation modes, and other personalized settings.
4. Operating the Earbuds
4.1. Sound Features
The JBL Tune Beam 2 earbuds feature JBL Pure Bass Sound for a rich audio experience. They also include:
- Adaptive Noise Cancellation (ANC): This feature actively filters out ambient noise, allowing for focused listening.
- Smart Ambient: This mode allows you to hear your surroundings while still enjoying your audio, enhancing situational awareness.
Image 4.1: Earbuds featuring Adaptive Noise Cancelling and Smart Ambient.
4.2. Calls
Each earbud is equipped with two microphones, totaling six microphones across both earbuds. These microphones are designed to capture and transmit your voice clearly while reducing ambient noise, ensuring clear calls even in noisy environments.
Image 4.2: Earbuds with 6 microphones for clear calls.
4.3. Multipoint Connection
The JBL Tune Beam 2 supports multipoint connection, allowing you to seamlessly switch between two connected Bluetooth devices. This feature enables you to manage calls from one device while listening to music or other audio from another, without needing to manually reconnect.
5. Battery and Charging
The earbuds offer a long battery life, providing up to 10 hours of listening time with Adaptive Noise Cancellation activated, and an additional 30 hours from the charging case. When ANC is deactivated, you can achieve up to 12 hours of playback, plus 36 hours from the case.
To ensure optimal battery performance, fully recharge your True Wireless earbuds at least every three months. The charging time for a full charge is approximately 2 hours.
Note: Battery life varies depending on usage and settings. The number of charging cables and plug types may differ by region.
6. Maintenance
The JBL Tune Beam 2 earbuds are rated IP54 for water and dust resistance, and the charging case is IPX2 protected. This means they are resistant to splashes of water and dust ingress, making them suitable for outdoor use and workouts. However, they are not designed for submersion in water.
To maintain your earbuds, regularly clean them with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials. Ensure the charging contacts on both the earbuds and the case are clean and dry before charging.
7. Troubleshooting
If you encounter issues with your JBL Tune Beam 2 earbuds, consider the following general troubleshooting steps:
- No Sound: Ensure the earbuds are charged, connected to your device, and the volume is turned up on both the earbuds and your device.
- Connection Issues: Try unpairing and re-pairing the earbuds with your device. Ensure Bluetooth is enabled and the earbuds are within range.
- Poor Sound Quality: Check if the ear tips are properly seated in your ears. Try different sized ear tips for a better seal. Ensure there are no obstructions between the earbuds and your device.
- Charging Problems: Verify that the charging cable is securely connected to both the case and a power source. Clean the charging contacts if necessary.
- Earbuds Not Responding: Place the earbuds back into the charging case, close the lid, and then open it again to reset them.
For more detailed troubleshooting or persistent issues, refer to the official JBL support website or contact customer service.
8. Specifications
| Feature | Detail |
|---|---|
| Model Name | JBL Tune Beam 2 |
| Connectivity Technology | Wireless (Bluetooth) |
| Wireless Communication Technology | Bluetooth |
| Ear Placement | In-Ear |
| Form Factor | In-Ear |
| Noise Isolation | Adaptive Noise Reduction |
| Frequency Response | 20 KHz |
| Sensitivity | 100 dB |
| Impedance | 16 Ohms |
| Battery Type | Lithium-ion |
| Rechargeable Battery | Yes |
| Charging Time | 2 hours |
| Water Resistance Level | IP54 (Earbuds), IPX2 (Case) |
| Control Method | Application |
| Compatible Devices | Bluetooth Android and Microsoft devices |
| Special Features | Noise Cancellation, Fast Charging, Multipoint Pairing, Sweat Resistant |
| Material | Metal |
| Manufacturer Warranty | 2 Years |
9. Warranty and Support
The JBL Tune Beam 2 earbuds come with a 2-year manufacturer's warranty. For warranty claims, technical support, or further assistance, please refer to the warranty booklet included in your package or visit the official JBL support website.
For additional resources and frequently asked questions, you may visit the JBL Brand Store.
