Vidapool SPT200-HV In/Above Ground Pool Pump User Manual

1. Introduction

This manual provides essential information for the safe and efficient operation of your Vidapool SPT200-HV In/Above Ground Pool Pump. This self-priming, high-flow pump features an integrated timer, a 2HP motor, and a flow rate of 8120 GPH, operating on 220V. Please read all instructions carefully before installation and use to ensure proper function and longevity of the product.

Vidapool Swimming Pool Pump with Timer, showing flexible performance settings, energy-saving mode, quiet operation, and low maintenance design.

Image: Overview of the Vidapool Swimming Pool Pump highlighting its key features.

2. Safety Information

WARNING: Failure to follow these instructions can result in serious injury or death.

Always disconnect power before servicing the pump.
Ensure the pump is installed by a qualified electrician in accordance with all local and national electrical codes.
Do not operate the pump if the power cord is damaged.
Keep children and pets away from the pump during operation.
Ensure proper ventilation around the pump to prevent overheating.
This pump is designed for swimming pool filtration only. Do not use for other purposes.

3. Product Overview

The Vidapool SPT200-HV pump is engineered for efficient pool water circulation and filtration. Key components include:

1.5" ID Adapters: For connecting to various pipe sizes.
2" ID Adapters: For connecting to various pipe sizes.
Filter Basket: Large capacity basket to capture debris.
Drain Plug: For easy water drainage.
Pure Copper Motor: Provides strong power for high flow.
5' Power Cord: UL certified for safety.
Earthing Terminal: For proper grounding.
Timer: Integrated for customizable energy-saving schedules.
Lid Opener: Tool for easy access to the filter basket.

Diagram showing labeled components of the Vidapool pool pump, including 1.5 inch and 2 inch ID adapters, filter basket, drain plug, pure copper motor, power cord, earthing terminal, timer, and lid opener.

Image: Labeled diagram of the Vidapool pool pump components.

Close-up of the pool pump motor, highlighting its continuous duty design for high flow, efficient circulation, stable operation, and ultra-low noise.

Image: Detail of the continuous duty motor, emphasizing its power and quiet operation.

Close-up of the UL certified power cord, indicating safety, performance, and compliance.

Image: Detail of the safe UL certified power cord.

4. Specifications

Feature	Specification
Brand	Vidapool
Model Number	SPT200-HV
Style	With Timer + 2HP + 220V
Power Source	AC
Item Weight	16.47 kg
Maximum Flow Rate	135 GPM (8120 GPH)
Maximum Lifting Height	60 feet
Horsepower	2 HP
Voltage	220V/60Hz
Specific Uses	Swimming pool filtration

Integrated Timer feature of the Vidapool pool pump, showing customizable energy-saving schedules.

Image: The integrated timer feature for energy-saving schedules.

5. Setup

5.1 Placement

Position the pump on a solid, level surface as close to the pool as possible to minimize friction loss in plumbing. Ensure adequate ventilation and protection from direct sunlight and harsh weather conditions.

5.2 Connection Methods

The pump supports two primary connection methods for inlet/outlet:

1-1/2" or 2" Schedule 40 PVC Pipe Glue Connection: For a permanent and secure connection using PVC cement.
1-1/2" or 2" Schedule 40 PVC Pipe Glue Connection + 2" PVC Hose with Clamp: For a more flexible connection, combining a glued PVC pipe section with a clamped PVC hose.

Diagram illustrating two outlet/inlet connection methods for the pool pump: Method 1 uses 1-1/2 or 2 inch Schedule 40 PVC pipe glue connection, and Method 2 uses 1-1/2 or 2 inch Schedule 40 PVC pipe glue connection with a 2 inch PVC hose and clamp.

Image: Visual guide for outlet/inlet connection methods.

5.3 Electrical Connection

Connect the pump to a dedicated 220V/60Hz power supply. Ensure all electrical connections are waterproof and properly grounded. Consult a qualified electrician if you are unsure about wiring procedures.

5.4 Pump Selection Tips (Horsepower based on Pool Size)

Selecting the correct pump horsepower is crucial for efficient filtration. Refer to the following guidelines based on pool shape and size:

Oval Pools

Image: Oval pool pump selection chart.

Rectangular Pools

Image: Rectangular pool pump selection chart.

Round Pools

Image: Round pool pump selection chart.

Kidney-Shaped Pools

Image: Kidney-shaped pool pump selection chart.

6. Operating Instructions

6.1 Priming the Pump

Before starting the pump for the first time or after draining, ensure the pump is primed:

Turn off all power to the pump.
Remove the transparent lid of the filter basket.
Fill the filter basket with water until it reaches the suction pipe level.
Replace the lid, ensuring it is securely tightened to prevent air leaks.
Restore power and start the pump. It should begin to draw water. If not, repeat the priming process.

6.2 Setting the Timer

The integrated timer allows for automated operation, optimizing energy use.

Calculate the desired pump run time based on your pool size and usage.
Wait until the exact time you want the pump to start its daily cycle.
Press the clock button on the timer control panel to select the desired running hours (e.g., 2, 4, 6, 8, 10, 12, 18, 24 hours).
The pump will then run for the set number of hours each day, starting at the time you initially set it.

Instructions for setting the timer on the Vidapool pool pump, including calculating run time, waiting for start time, pressing the clock button, and understanding daily operation.

Image: Guide to setting the pump's integrated timer.

6.3 General Operation

Once primed and the timer is set, the pump will operate automatically. Regularly check the pressure gauge on your filter (if applicable) to determine when backwashing or filter cleaning is needed.

Official Product Video: Vidapool Pool Pump with Timer

Video: An official video from Vidapool (Langley Tools) demonstrating the features and operation of the pool pump with its integrated timer.

7. Maintenance

7.1 Cleaning the Filter Basket

The pump's extra-large filter basket effectively captures debris. Regular cleaning is essential for optimal performance.

Turn off all power to the pump.
Use the provided lid opener tool to unscrew and remove the transparent lid.
Carefully lift out the filter basket.
Empty any collected debris (leaves, hair, grit, etc.) and rinse the basket thoroughly with water.
Inspect the basket for any damage.
Place the clean basket back into the pump housing, ensuring it seats correctly.
Replace the lid and tighten it securely.
Re-prime the pump if necessary (refer to Section 6.1).

Image showing the detachable filter basket design of the pool pump, highlighting its ability to filter debris like leaves, hair, and grit, and its ease of checking and cleaning.

Image: Detachable filter basket design for easy cleaning.

7.2 Winterization

In colder climates, proper winterization is crucial to prevent damage:

Turn off all power to the pump.
Drain all water from the pump by removing the drain plug.
Disconnect plumbing lines.
Store the pump in a dry, frost-free location.

8. Troubleshooting

Refer to the table below for common issues and their solutions.

Problem	Possible Cause	Solution
Pump does not start	No power; tripped breaker; faulty wiring; motor issue	Check power supply, circuit breaker. Verify wiring. Consult electrician if motor is faulty.
Pump runs but no water flow	Not primed; air leak in suction line; clogged filter basket; closed valves	Prime the pump. Check all connections for air leaks. Clean filter basket. Open all necessary valves.
Low water flow	Partially clogged filter basket; restricted suction/discharge lines; low water level in pool	Clean filter basket. Check and clear any obstructions in plumbing. Ensure adequate pool water level.
Excessive noise/vibration	Air leak; cavitation; loose mounting; worn bearings	Check for air leaks. Ensure proper water flow to prevent cavitation. Tighten mounting bolts. Contact support for bearing issues.
Timer not working correctly	Incorrect setting; power interruption	Re-set the timer according to instructions. Ensure continuous power supply.

9. Warranty and Support

Your Vidapool SPT200-HV Pool Pump comes with a 2-Year Warranty, ensuring peace of mind regarding product quality and performance. Additionally, Vidapool offers 24 Months Tech Support to assist with any installation, operation, or troubleshooting queries you may have.

For technical assistance or warranty claims, please refer to the contact information provided with your purchase or visit the official Vidapool website.

Image highlighting the durability and reliability of the Vidapool pool pump, along with 24 months of tech support.

Image: Durable and reliable pump with tech support information.