Sanag G6S Open Ear Bluetooth Headphones User Manual

1. Introduction

Thank you for choosing the Sanag G6S Open Ear Bluetooth Headphones. These headphones are designed to provide a comfortable audio experience while allowing you to remain aware of your surroundings. This manual will guide you through the setup, operation, and maintenance of your new headphones.

2. What's in the Box

• Sanag G6S Open Ear Bluetooth Headphones (1 pair)
• Charging Case (1)
• USB-C Charging Cable (1)
• User Manual (this document)

Image: Contents of the Sanag G6S package.

3. Product Overview

The Sanag G6S headphones feature an open-ear design for comfort and situational awareness. They are lightweight and ergonomically contoured for a secure fit.

Image: Open-ear comfort design.

Image: Lightweight design of the earbud.

4. Setup

4.1 Charging the Headphones and Case

1. Connect the provided USB-C cable to the charging port on the case.
2. Connect the other end of the cable to a USB power adapter (not included) or a computer's USB port.
3. The indicator light on the charging case will show charging status.
4. Place the headphones into the charging case to charge them. The case will charge the headphones automatically.

A full charge provides approximately 10 hours of listening time, with the charging case extending total battery life to about 36 hours. Fast charging allows for 3 hours of use from a 10-minute charge.

Image: Charging the Sanag G6S headphones and case.

4.2 Bluetooth Pairing

1. Ensure the headphones are charged.
2. Open the charging case. The headphones will automatically enter pairing mode.
3. On your device (smartphone, tablet, etc.), enable Bluetooth.
4. Search for available Bluetooth devices and select "SANAG G6S" from the list.
5. Once connected, you will hear a confirmation tone, and the headphones will be ready for use.

The headphones will automatically reconnect to the last paired device when taken out of the case and within range.

Image: One-click connection process.

5. Operating Instructions

5.1 Basic Controls

The Sanag G6S headphones feature intuitive button controls on the earpiece for easy management of audio and calls.

• Play/Pause: Single press the multi-function button on either earbud.
• Next Track: Double press the multi-function button on the right earbud.
• Previous Track: Double press the multi-function button on the left earbud.
• Volume Up: Triple press the multi-function button on the right earbud.
• Volume Down: Triple press the multi-function button on the left earbud.
• Answer/End Call: Single press the multi-function button on either earbud during an incoming call or active call.
• Reject Call: Press and hold the multi-function button on either earbud during an incoming call.
• Activate Voice Assistant: Press and hold the multi-function button for 2 seconds.

5.2 App Control

For enhanced control and customization, download the Sanag application. The app allows you to:

• Adjust volume and other routine operations.
• Access voice assistant translation and noise control features.
• Support TF card/Radio mode (if applicable to your model).
• Set EQ sound effects.
• View battery reports.
• Use the app to locate your headphones if misplaced.

Image: Sanag App Control interface.

6. Maintenance

6.1 Cleaning

• Wipe the headphones and charging case with a soft, dry, lint-free cloth.
• Do not use abrasive cleaners, solvents, or aerosol sprays.
• Avoid getting moisture in any openings.

6.2 Storage

• Store the headphones in their charging case when not in use to protect them and keep them charged.
• Avoid storing in extreme temperatures or high humidity.

7. Troubleshooting

7.1 Pairing Issues

• Ensure Bluetooth is enabled on your device and the headphones are in pairing mode.
• Make sure the headphones are charged.
• Try turning off and on your device's Bluetooth, then re-attempt pairing.
• If previously paired, forget the device in your Bluetooth settings and pair again.

7.2 No Sound or Low Volume

• Check the volume levels on both your headphones and your connected device.
• Ensure the headphones are properly connected to your device.
• Re-pair the headphones with your device.

7.3 Charging Problems

• Verify the charging cable is securely connected to both the case and the power source.
• Try a different USB-C cable or power adapter.
• Ensure the charging contacts on the headphones and inside the case are clean and free of debris.

8. Specifications

9. Safety Information

• Do not expose the headphones or charging case to extreme temperatures, direct sunlight, or fire.
• Avoid using the headphones at high volume levels for extended periods to prevent hearing damage.
• Do not attempt to disassemble or modify the product. This may void the warranty and cause damage.
• Keep out of reach of children and pets.
• Dispose of the product responsibly according to local regulations.

10. Warranty and Support

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Sanag website. Contact details for support are typically found on the product packaging or the brand's online support page.

11. Product Video