Thermalright FW PRO 360 ARGB CPU AIO Cooler Instruction Manual

1. Product Overview

The Thermalright FW PRO 360 ARGB is an all-in-one (AIO) liquid CPU cooler designed for high-performance cooling. It features a 360mm radiator, three 120mm PWM fans, and an integrated 2.73-inch IPS LCD display on the water block for system monitoring and customization.

This cooler is engineered to provide efficient heat dissipation with low noise operation, making it suitable for various computing environments.

Image: The Thermalright FW PRO 360 ARGB cooler installed, highlighting its RGB fans and the customizable LCD screen.

Key Features:

• 360mm Radiator: Fully blackened nano-painted cold drain for effective heat exchange.
• High-Performance Fans: Three 120mm PWM air pressure fans (TL-P12-S) with shock-absorbing silicone pads for quiet operation and high airflow.
• Integrated IPS LCD Display: 2.73-inch screen with 320x320 resolution, 450 NITS peak brightness, and 24-bit true color for real-time system monitoring and customizable visuals.
• Durable Water Pipes: Polymer-compiled protective water pipes designed for low liquid evaporation and extended lifespan.
• Broad Compatibility: Supports Intel LGA1150/1151/1155/1156/1200/2011/2066/1700/1851 and AMD AM4/AM5 sockets.

2. Package Contents

Verify that all components are present before beginning installation.

• Thermalright FW PRO 360 ARGB CPU AIO Cooler (Radiator, Pump/Water Block with LCD, and three 120mm fans pre-attached)
• Mounting hardware for Intel sockets (LGA1150/1151/1155/1156/1200/2011/2066/1700/1851)
• Mounting hardware for AMD sockets (AM4/AM5)
• Fan screws
• Thermal paste (pre-applied or included in a tube)
• USB cable for LCD display
• ARGB cable

3. Setup and Installation

This section outlines the general steps for installing the Thermalright FW PRO 360 ARGB cooler. Specific steps may vary slightly depending on your motherboard and PC case. Refer to your motherboard manual for precise socket and header locations.

3.1 Preparation

• Ensure your system is powered off and unplugged from the wall outlet.
• Open your PC case and locate the CPU socket area and radiator mounting points (typically top or front of the case).
• Remove any existing CPU cooler. Clean the CPU surface thoroughly with isopropyl alcohol to remove old thermal paste.

3.2 Radiator and Fan Installation

1. Determine the optimal mounting location for the 360mm radiator in your PC case (e.g., top, front).
2. Secure the radiator to the case using the provided fan screws. Ensure proper airflow direction (intake or exhaust) based on your case's cooling design.
3. Connect the three 4-pin PWM fan cables to your motherboard's fan headers or a fan controller.

Image: Radiator design details and motherboard compatibility for Intel and AMD sockets.

3.3 Water Block Installation

1. Select the appropriate mounting brackets for your CPU socket (Intel or AMD).
2. Attach the chosen brackets to the water block.
3. Position the water block over the CPU. If thermal paste is not pre-applied, apply a small pea-sized amount to the center of the CPU IHS (Integrated Heat Spreader).
4. Secure the water block to the motherboard using the provided standoffs and thumb screws, ensuring even pressure.
5. Connect the pump's 4-pin PWM connector to the motherboard's dedicated AIO_PUMP or CPU_FAN header.
6. Connect the USB cable from the water block to an available internal USB 2.0 header on your motherboard. This powers the LCD display and enables software control.
7. Connect the ARGB cable from the water block to a 5V 3-pin ARGB header on your motherboard. Note: This cooler supports 5V 3-pin ARGB only and is not compatible with 12V 4-pin RGB headers.

Image: Installed water block and fans, illustrating the 5V 3-pin ARGB connection requirement.

3.4 Initial Power On

After installation, double-check all connections. Power on your system. The LCD display should illuminate, and the fans should begin spinning. It is normal to hear some gurgling noises initially as air bubbles are purged from the loop; this should subside within a few minutes of operation.

4. Operating the LCD Display and Software

The 2.73-inch IPS LCD display on the water block provides real-time monitoring of system parameters and allows for visual customization.

4.1 TRCC Software Installation

• Download the Thermalright TRCC software from the official Thermalright website.
• Install the software by following the on-screen instructions.

4.2 Display Customization

The TRCC software allows you to customize the LCD display:

• System Monitoring: Display CPU temperature, GPU temperature, clock frequencies, and other system parameters.
• Custom Images/Videos: Upload your own GIF animations or MP4 video files to be displayed as custom backgrounds or themes.
• Pre-set Themes: Choose from a variety of pre-installed themes and animations within the software.
• Text Customization: Display custom text messages on the screen.

Image: The water block's LCD display showcasing system monitoring and customization capabilities.

Image: The TRCC software interface for managing LCD display settings and content.

4.3 Magnetic Display Orientation

The LCD screen is attached to the pump block via magnets and is not directional. This allows you to rotate the screen to any desired orientation after installation, ensuring the display is always upright and readable.

5. Maintenance

The Thermalright FW PRO 360 ARGB AIO cooler is designed for minimal maintenance due to its closed-loop system and polymer-sleeved water pipes that reduce liquid evaporation.

5.1 Dust Cleaning

• Periodically inspect the radiator fins and fan blades for dust accumulation.
• Use compressed air or a soft brush to gently remove dust from the radiator and fans. Ensure the fans are held stationary during cleaning to prevent damage.

5.2 System Inspection

• Occasionally check the water tubes for any signs of kinks or damage.
• Ensure all cables (PWM, ARGB, USB) are securely connected.

6. Troubleshooting

This section addresses common issues you might encounter with your AIO cooler.

6.1 High CPU Temperatures

• Check Thermal Paste: Ensure adequate thermal paste application and proper contact between the water block and CPU. Reapply if necessary.
• Verify Pump Operation: Confirm the pump is running by checking its connection to the motherboard's AIO_PUMP or CPU_FAN header and listening for its operation.
• Fan Speed: Ensure fans are spinning at appropriate speeds. Check fan connections and BIOS/software settings.
• Radiator Airflow: Clear any dust or obstructions from the radiator fins. Ensure case airflow is optimized.

6.2 Unusual Noises (Gurgling, Buzzing)

• Gurgling: Initial gurgling is normal as air purges from the loop. If it persists, gently tilt your PC case to help trapped air move to the radiator.
• Buzzing/Vibration: Check if fans are securely mounted and not touching any cables or case components. Ensure the pump is mounted firmly.

6.3 LCD Display Not Working or Showing Incorrect Data

• USB Connection: Verify the internal USB 2.0 cable from the water block is securely connected to both the water block and the motherboard.
• TRCC Software: Ensure the Thermalright TRCC software is installed and running in the background. Update to the latest version if available.
• Power Cycle: Restart your computer to refresh connections and software.

6.4 ARGB Lighting Not Functioning

• ARGB Connection: Confirm the 5V 3-pin ARGB cable is correctly connected to a compatible motherboard header.
• Software Control: Use your motherboard's RGB software or the TRCC software to control the lighting effects.
• Compatibility: Ensure you are using a 5V 3-pin ARGB header, not a 12V 4-pin RGB header.

7. Specifications

Detailed technical specifications for the Thermalright FW PRO 360 ARGB CPU AIO Cooler.

Image: Detailed specifications and features of the TL-P12-S fan.

Image: Internal design of the pump and coldplate, engineered for efficient heat transfer.

8. Warranty Information

Thermalright products are typically covered by a manufacturer's warranty. For specific warranty terms, duration, and claim procedures, please refer to the warranty card included with your product or visit the official Thermalright website. Retain your proof of purchase for warranty claims.

9. Support

If you encounter any issues or have questions not covered in this manual, please contact Thermalright customer service or the retailer from whom you purchased the product. You may also find additional resources, FAQs, and updated drivers/software on the official Thermalright website.

Official Product Videos: