AQUASTRONG In/Above Ground Pool Pump Instruction Manual

Introduction

Thank you for choosing the AQUASTRONG In/Above Ground Pool Pump. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new pool pump. Designed for both in-ground and above-ground pools, this high-flow pump ensures crystal-clear water circulation.

Figure 1: AQUASTRONG In/Above Ground Pool Pump, Model PSP200.

Safety Information

Always follow basic safety precautions to reduce the risk of fire, electric shock, and injury to persons.

• Read all instructions before using the pump.
• Ensure the pump is connected to a properly grounded outlet.
• Do not operate the pump if the power cord is damaged.
• Keep children away from the pump and pool area during operation.
• Disconnect power before performing any maintenance or service.
• The pump is designed for permanent installation and should not be moved while operating.
• Operating on 220V, this unit is equipped with an ETL-certified motor, ensuring long-lasting performance and safety.

Figure 2: The pump features a safe UL certified cord for enhanced safety.

Product Overview and Components

The AQUASTRONG Pool Pump is engineered for optimal performance and durability. Familiarize yourself with its key components:

Figure 3: Labeled diagram of the AQUASTRONG Pool Pump components.

1. 2" ID Inlet
2. 2" ID Outlet
3. Filter Basket
4. Drain Plug
5. Pure Copper Motor
6. 5' Power Cord
7. Earthing Terminal
8. Voltage Box
9. Lid Opener

Specifications

Figure 4: Detailed technical specifications and flow rate performance graph.

Figure 5: Product dimensions for installation planning.

Setup and Installation

The AQUASTRONG pool pump is designed for easy installation with adaptable fittings to suit various pool systems.

Pre-Installation Checklist:

• Ensure the installation site is level, well-drained, and protected from direct weather exposure.
• Verify that the electrical supply matches the pump's voltage (220V).
• Gather necessary tools and additional plumbing components if required.

Connecting the Pump:

The pump comes with two different adapters (1.5-inch and 2-inch internal diameter) for versatile connection to your pool's plumbing.

Figure 6: Identify the 'IN' (inlet) and 'OUT' (outlet) ports for correct plumbing.

Figure 7: Connection methods for 1.5-inch Schedule 40 PVC pipe (glue connection) or 2-inch PVC hose with clamp.

For a visual guide on installation, please refer to the official seller video below:

Operating Instructions

The AQUASTRONG pool pump is designed for low-maintenance, plug-and-play operation. This single-speed pool pump starts automatically when plugged into a 220V outlet.

Starting the Pump:

• Ensure all plumbing connections are secure and the filter basket is clean.
• Connect the pump's power cord to a grounded 220V electrical outlet.
• The pump will begin circulating water immediately.

Figure 8: The 3HP pump delivers a maximum flow rate of 9350 GPH for efficient water circulation.

Figure 9: The pump effectively moves water, ensuring optimal pool cleanliness.

Continuous Duty Motor:

The pump features a continuous duty pure copper motor, providing strong power for high flow and efficient pool circulation. It is designed for stable operation with ultra-low noise.

Figure 10: The continuous duty motor ensures powerful and quiet operation.

Maintenance

Regular maintenance is crucial for the longevity and optimal performance of your AQUASTRONG pool pump. The pump is designed for easy maintenance.

Filter Basket Cleaning:

The extra-large, detachable filter basket is designed to capture debris such as leaves, hair, and grit, preventing them from entering the pump and damaging the motor. Regular inspection and cleaning of the filter basket are essential.

• Turn off the pump and disconnect power before opening the filter basket lid.
• Use the provided lid opener to safely remove the lid.
• Remove the filter basket and empty any collected debris.
• Rinse the basket thoroughly with water.
• Reinsert the clean basket and secure the lid tightly.

Figure 11: The extra-large filter basket efficiently collects debris, keeping your pool clean.

Figure 12: The detachable basket design allows for easy inspection and cleaning of debris.

Troubleshooting

This section provides solutions to common issues you might encounter with your pool pump. Always disconnect power before attempting any troubleshooting steps.

Pump Selection Tips

Choosing the right pump for your pool size is essential for efficient circulation and filtration. Refer to the following guidelines based on common pool shapes and sizes:

Rectangular Pools:

Figure 13: Recommended pump horsepower for various rectangular pool sizes.

Round Pools:

Figure 14: Recommended pump horsepower for various round pool sizes.

Oval Pools:

Figure 15: Recommended pump horsepower for various oval pool sizes.

Kidney-Shaped Pools:

Figure 16: Recommended pump horsepower for various kidney-shaped pool sizes.

Warranty and Support

The AQUASTRONG pool pump is backed by a 2-year warranty, ensuring long-lasting support and efficiency. For any inquiries or technical assistance, please contact AQUASTRONG customer support.

Manufacturer: Shandong Penghui Environmental Technology Co., Ltd

For further support, visit the AQUASTRONG Store on Amazon.