XIAOMI BHR9049GL

XIAOMI Insulated Kettle 1.8L GL User Manual

Model: BHR9049GL

1. Introduction

Thank you for choosing the XIAOMI Insulated Kettle 1.8L GL. This manual provides essential information for the safe and efficient use of your new insulated kettle. Please read it thoroughly before first use and retain it for future reference.

The XIAOMI Insulated Kettle is designed to keep liquids hot or cold for extended periods, making it ideal for various beverages. Its 1.8-liter capacity and insulated design ensure convenience and performance.

2. Important Safety Instructions

  • Read all instructions before using the kettle.
  • Do not immerse the kettle or its electrical components in water or other liquids.
  • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • Children should be supervised to ensure that they do not play with the appliance.
  • Do not fill above the maximum fill line to prevent boiling water from overflowing.
  • Always ensure the lid is securely closed before pouring to prevent spills and burns.
  • Use the kettle only for its intended purpose.
  • Do not place the kettle on or near a hot gas or electric burner, or in a heated oven.
  • Avoid contact with steam escaping from the spout or lid during use.
  • Do not use the kettle if it is damaged in any way. Contact customer support for assistance.
  • Handle with care when filled with hot liquids.

3. Setup and First Use

  1. Unpacking: Carefully remove the kettle from its packaging. Retain packaging materials for future transport or storage if needed.
  2. Initial Cleaning: Before first use, wash the interior of the kettle and the lid with warm, soapy water. Rinse thoroughly with clean water.
  3. Drying: Ensure all parts are completely dry before use.
Front view of the Xiaomi Insulated Kettle 1.8L GL

Image 1: Front view of the Xiaomi Insulated Kettle 1.8L GL. The kettle is white with a simple, cylindrical design and a flat top.

Side view of the Xiaomi Insulated Kettle 1.8L GL with handle

Image 2: Side view of the Xiaomi Insulated Kettle 1.8L GL, showing the integrated handle for easy carrying and pouring.

4. Operating Instructions

4.1 Filling the Kettle

  1. Open the Lid: Press the release button or lift the lid to open the kettle.
  2. Fill with Liquid: Pour your desired hot or cold liquid into the kettle. Do not exceed the maximum fill line to prevent spillage.
  3. Close the Lid: Securely close the lid until it clicks into place. This ensures optimal insulation.
Person filling the Xiaomi Insulated Kettle with water from a tap

Image 3: A person filling the Xiaomi Insulated Kettle with water from a kitchen tap, demonstrating the wide opening for easy filling.

Hand opening the lid of the Xiaomi Insulated Kettle

Image 4: A hand demonstrating how to open the lid of the Xiaomi Insulated Kettle, revealing the inner mechanism.

4.2 Pouring Liquid

  1. Position: Hold the kettle by its handle and position the spout over your cup or container.
  2. Pour: Gently tilt the kettle to pour the liquid. The lid mechanism is designed for controlled pouring.
  3. Close: After pouring, return the kettle to an upright position and ensure the lid is fully closed to maintain temperature.
Person pouring liquid from the Xiaomi Insulated Kettle into a glass

Image 5: A person pouring liquid from the Xiaomi Insulated Kettle into a glass, showcasing the controlled pour spout.

Xiaomi Insulated Kettle on a kitchen counter with snacks

Image 6: The Xiaomi Insulated Kettle placed on a wooden kitchen counter, ready for use, alongside a glass of water and some snacks.

5. Care and Maintenance

  • Regular Cleaning: Clean the kettle regularly, especially after using it for beverages other than water.
  • Washing: Wash the interior with warm, soapy water and a soft brush or sponge. Rinse thoroughly. The exterior can be wiped with a damp cloth.
  • Drying: Allow the kettle to air dry completely with the lid open to prevent odors and mildew.
  • Do Not Use Abrasives: Avoid using abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the finish and interior lining.
  • Storage: Store the kettle in a clean, dry place when not in use.

6. Troubleshooting

Problem Possible Cause Solution
Liquid does not stay hot/cold for long. Lid not properly sealed; kettle not pre-heated/cooled. Ensure the lid is securely closed. For best results, pre-heat with hot water or pre-cool with cold water for a few minutes before filling with your desired beverage.
Unpleasant odor inside the kettle. Improper cleaning or storage. Wash thoroughly with warm, soapy water and rinse. Allow to air dry completely with the lid open. A mixture of baking soda and water can help neutralize odors.
Difficulty pouring. Lid not fully open or spout blocked. Ensure the lid mechanism is fully engaged for pouring. Check the spout for any blockages and clean if necessary.

If you encounter issues not listed here, please contact XIAOMI customer support.

7. Product Specifications

Feature Detail
Brand XIAOMI
Model Name Xiaomi Insulated Kettle 1.8L GL
Model Number BHR9049GL
Capacity 1.8 Liters
Material Plastic
Colour Grey
Special Feature Insulated Design
Product Dimensions (L x W x H) 33L x 33W x 7H Centimetres
Item Weight 0.3 Kilograms
Manufacturer Xiaomi

8. Warranty and Support

The XIAOMI Insulated Kettle 1.8L GL comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including warranty duration and coverage details.

For technical support, service, or warranty claims, please contact XIAOMI customer service through their official website or the contact information provided in your product documentation. Keep your purchase receipt as proof of purchase.

You can visit the official XIAOMI store for more information: XIAOMI Store

© 2026 XIAOMI. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.