1. Introduction
Thank you for choosing the Homirxan 1.2 Cub Digital Home Safe. This manual provides essential instructions for the safe and proper use, setup, and maintenance of your new safe. Please read this manual thoroughly before operating the safe and retain it for future reference.
Image: The Homirxan 1.2 Cub Digital Home Safe, open to display its interior capacity, suitable for storing various valuables.
2. Important Safety Information
- Do not store emergency keys inside the safe. Keep them in a secure, separate location.
- Ensure the safe is placed on a stable, level surface or securely mounted to a wall or floor.
- Keep the safe away from excessive moisture or direct heat sources.
- Do not attempt to force the safe open if the digital lock malfunctions. Use the emergency key.
- Batteries are required for the digital keypad. Ensure they are installed correctly and replaced when low.
- This safe is designed to deter unauthorized access and protect contents. It is not impervious to all forms of attack.
3. Package Contents
Please check the package to ensure all items are present:
- 1 x Homirxan Digital Home Safe
- 2 x Emergency Keys
- 4 x Expansion Screws (for mounting)
- 1 x Instruction Manual
- 1 x Removable Shelf
Image: Visual representation of the items included in the safe's package.
4. Initial Setup
4.1 Battery Installation
- Locate the battery compartment on the inside of the safe door, usually behind the keypad cover.
- Open the battery compartment cover.
- Insert 4 AA batteries (not included) according to the polarity indicators (+/-).
- Close the battery compartment cover.
- Test the keypad by entering a default code (if provided in the manual) or by attempting to set a new code.
4.2 Setting Your Personal Passcode
The safe allows for a 3-8 digit personal passcode.
- With the safe door open, press the red reset button located on the inside of the door (usually near the hinge). You will hear a beep.
- Within 5 seconds, enter your desired 3-8 digit passcode on the keypad.
- Press the "#" or "B" button to confirm. You will hear a confirmation beep.
- Test the new passcode with the door open before closing it. Enter your passcode, then turn the knob clockwise to ensure it retracts the bolts.
Important: If you forget your passcode, you will need to use the emergency key to open the safe.
5. Operating the Safe
5.1 Opening the Safe with Passcode
- Enter your 3-8 digit personal passcode on the keypad.
- Press the "#" or "B" button. The green light will illuminate, and you will hear a beep.
- Within 5 seconds, turn the knob clockwise to open the safe door.
Image: Illustration of the three methods for opening the safe, including passcode entry, emergency key, and external power with passcode.
5.2 Closing and Locking the Safe
- Close the safe door.
- Turn the knob counter-clockwise to extend the locking bolts and secure the door.
5.3 Using the Emergency Key
The emergency key is for initial opening, forgotten passcodes, or dead batteries.
- Locate the emergency keyhole, usually concealed behind a cover on the keypad panel.
- Gently remove the cover.
- Insert the emergency key and turn it clockwise.
- While holding the key turned, turn the main knob clockwise to open the safe.
- Once open, you can replace the batteries if needed or reset the passcode.
5.4 External Power Supply (for Dead Batteries)
If the batteries are completely dead and you don't have the emergency key readily available, you can use an external USB power source.
- Connect a USB cable to the external power port on the keypad (usually a micro-USB port).
- Connect the other end of the USB cable to a power source (e.g., power bank, USB wall adapter).
- The keypad will power on. Enter your passcode and turn the knob clockwise to open the safe.
5.5 Alarm System
The safe features an anti-theft alarm system:
- If an incorrect passcode is entered 3 consecutive times, the alarm will activate, and the safe will lock for 20 seconds.
- Any strong vibration or impact to the safe may also trigger the alarm.
- To silence the alarm, enter the correct passcode or use the emergency key.
5.6 Removable Shelf
The safe includes a removable shelf to organize items of different sizes. To adjust or remove the shelf, simply slide it out of its supports inside the safe.
Image: The safe's interior, illustrating how the removable shelf allows for flexible storage configurations.
6. Installation (Mounting)
For enhanced security, the safe can be mounted to a wall or floor using the provided expansion screws.
- Choose a suitable location for mounting. Ensure the surface is solid and can support the weight of the safe and its contents.
- Open the safe door and locate the pre-drilled mounting holes on the back or bottom panel.
- Position the safe and mark the drilling points on the wall or floor through the pre-drilled holes.
- Drill pilot holes at the marked points using an appropriate drill bit for your wall/floor material.
- Align the safe with the drilled holes and insert the expansion screws through the safe's holes into the wall/floor.
- Tighten the screws securely to fix the safe in place.
Image: Step-by-step guide for wall-mounted installation of the safe.
7. Maintenance
- Battery Replacement: Replace batteries promptly when the low battery indicator appears on the keypad. Always use new, high-quality AA alkaline batteries.
- Cleaning: Wipe the safe's exterior with a soft, damp cloth. Avoid abrasive cleaners or solvents.
- Key Storage: Keep emergency keys in a secure location outside the safe, accessible only to authorized individuals.
- Regular Checks: Periodically check the locking bolts and hinges for smooth operation.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Safe does not open with passcode. | Incorrect passcode entered; low or dead batteries. | Re-enter correct passcode. Replace batteries or use external USB power. Use emergency key if necessary. |
| Keypad is unresponsive. | Dead batteries; loose battery connection. | Replace batteries, ensuring correct polarity. Check battery compartment for secure connection. Use external USB power. |
| Alarm sounds unexpectedly. | Incorrect passcode attempts; physical impact/vibration. | Enter correct passcode or use emergency key to disarm. Avoid strong impacts to the safe. |
| Safe door does not close or lock properly. | Obstruction in the door frame; locking bolts misaligned. | Check for any obstructions. Ensure the safe is on a level surface. Contact support if issue persists. |
9. Specifications
| Brand | Homirxan |
| Model Number | 25UB-NEW |
| Capacity | 1.2 Cubic Feet |
| Product Dimensions (D x W x H) | 9.84"D x 13.78"W x 9.84"H |
| Item Weight | 6.8 Kilograms (14.97 pounds) |
| Material | Alloy Steel |
| Lock Type | Electronic Combination Lock |
| Special Features | Alarm System, Combination Lock, Removable Shelf, Sensor Light |
| Mounting Type | Wall Mount |
| Batteries Required | Yes (4 x AA, not included) |
10. Warranty and Support
Homirxan provides a lifetime warranty for this product. If you encounter any issues or have questions, please contact our customer support team.
Customer Support: For assistance, please refer to the contact information provided on the product packaging or the official Homirxan website. When contacting support, please have your model number (25UB-NEW) and purchase details ready.
Lost Emergency Key: If your emergency key is lost, please contact customer support. Provide the unique serial number found on the keyhole to request a replacement.