Nylavee SK400

Download PDF
Contents

Nylavee SK400 2.1 Computer Speakers with Subwoofer User Manual

Model: SK400

Introduction

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Nylavee SK400 2.1 Computer Speakers with Subwoofer. Please read this manual thoroughly before using the product to ensure proper functionality and longevity.

Product Overview

The Nylavee SK400 is a 2.1 channel speaker system designed to deliver enhanced audio for computers, gaming consoles, laptops, and tablets. It features a subwoofer for deep bass, two satellite speakers, and customizable LED lighting.

Components

  • 2 x Satellite Speakers
  • 1 x Subwoofer
  • Integrated USB/USB-C Power Cable
  • Integrated 3.5mm Aux Audio Cable
  • User Manual (this document)

Key Features

  • Dynamic 2.1 Channel Audio: Provides Hi-Fi sound with two satellite speakers and a dedicated subwoofer.
  • Enhanced Bass Performance: 4-inch subwoofer unit with a downward-facing design for rich low-end frequencies.
  • Customizable LED Lighting: Touch-controlled lighting with 6 modes (Symphony, Flow, Breathing, and 3 Solid Colors).
  • Easy Controls: Convenient volume knob for audio adjustment.
  • Plug and Play Connectivity: USB/USB-C powered and 3.5mm Aux input, requiring no additional drivers.
  • Compact Design: Space-saving dimensions suitable for various desktop setups.

Product Diagram

Nylavee SK400 2.1 Computer Speakers with Subwoofer
Figure 1: Front and side view of the Nylavee SK400 speakers and subwoofer.

This image displays the two satellite speakers and the central subwoofer unit. The satellite speakers feature integrated LED lighting strips and a volume knob on one unit. The subwoofer has a port on its front face.

Internal view of a satellite speaker showing speaker units
Figure 2: Internal components of a satellite speaker.

This diagram illustrates the internal structure of one satellite speaker, highlighting the two speaker units and two speaker ports for immersive sound delivery.

Diagram of down-firing subwoofer
Figure 3: Down-firing subwoofer design.

This image shows the underside of the subwoofer, emphasizing its down-firing design which utilizes ground reflection to enhance bass frequencies.

Nylavee SK400 speakers with vivid LED lighting on a desk
Figure 4: Speakers displaying vivid LED lighting modes.

This image depicts the speakers set up on a desk with a monitor, showcasing the various vibrant LED lighting effects available, including Flow, Breathing, Symphony, and Solid colors.

Connectivity diagram for Nylavee SK400 speakers
Figure 5: Plug and Play connectivity options.

This diagram illustrates the speaker's compatibility with various devices (laptop, PC, monitor, tablet, phone, projector) via USB/USB-C for power and 3.5mm Aux for audio, highlighting its plug-and-play nature.

Setup Instructions

  1. Placement: Position the two satellite speakers on either side of your monitor or listening area. Place the subwoofer on the floor or a sturdy surface near the satellite speakers for optimal bass reflection.
  2. Connect Audio Cable: Plug the 3.5mm audio jack from the speaker system into the audio output port (headphone jack) of your computer, laptop, tablet, or other compatible device.
  3. Connect Power Cable: Plug the USB-A or USB-C connector of the integrated power cable into an available USB port on your device (PC, laptop, monitor) or a compatible USB power adapter (not included). The speakers are USB powered and do not require an external power brick.
  4. Power On: Once both audio and power cables are connected, the speakers should power on automatically. The LED lights will illuminate.
  5. Adjust Volume: Rotate the volume knob on the right satellite speaker to adjust the audio level.

Note: Ensure your device's audio output is set to the connected speakers if no sound is heard initially.

Operating Instructions

Volume Control

The main volume control is located on the right satellite speaker. Rotate the knob clockwise to increase volume and counter-clockwise to decrease volume.

LED Lighting Modes

The speakers feature touch-controlled LED lighting with 6 distinct modes. To change the lighting mode, gently touch the designated touch sensor on top of the right satellite speaker. Cycle through the following modes:

  • Symphony
  • Flow
  • Breathing
  • Solid Color 1
  • Solid Color 2
  • Solid Color 3

A quick tap will cycle through the modes. To turn off the lighting, press and hold the touch sensor for a few seconds.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the speaker surfaces. Do not use liquid cleaners or abrasive materials, as these can damage the finish or internal components.
  • Dust: Regularly dust the speaker grilles and subwoofer port to prevent accumulation that could affect sound quality.
  • Placement: Avoid placing speakers in direct sunlight, near heat sources, or in areas with high humidity. Ensure adequate ventilation around the subwoofer.
  • Cables: Handle cables carefully. Avoid sharp bends or excessive pulling that could damage the connectors or wiring.

Troubleshooting

No Sound

  • Ensure the 3.5mm audio cable is securely connected to both the speakers and your audio source.
  • Verify the USB power cable is connected to a working USB port or power adapter.
  • Check the volume knob on the speaker and ensure it is turned up.
  • Confirm that the audio output settings on your computer or device are configured to use the connected speakers.
  • Test with a different audio source or device to rule out source issues.

Distorted Sound

  • Lower the volume on both the speakers and your audio source. Excessive volume can cause distortion.
  • Check for loose cable connections.
  • Ensure the speakers are not placed too close to other electronic devices that might cause interference.

LED Lights Not Working

  • Ensure the speakers are powered on via the USB connection.
  • Gently tap the touch sensor on the right satellite speaker to cycle through lighting modes.
  • If the lights were previously off, a long press on the touch sensor might be needed to reactivate them.

Specifications

Model NameSK400
Speaker Type2.1 Computer Speakers with Subwoofer
Connectivity TechnologyAuxiliary (3.5mm), USB/USB-C (Power)
Power SourceCorded Electric (USB/USB-C Powered)
Speaker Maximum Output Power28 Watts
Frequency Response20 KHz
Signal-to-Noise Ratio73 dB
Impedance4 Ohm
Subwoofer Speaker Unit4 Inches (as per product features)
Control MethodTouch (for lighting), Rotary Knob (for volume)
Product Dimensions (Subwoofer)7.8"W x 5.75"H x 4.76"D
Product Dimensions (Satellite Speaker)7"W x 3.23"H x 4.93"D
Item Weight1.8 Kilograms (approx. 3.96 lbs)
MaterialAcrylonitrile Butadiene Styrene (ABS), Metal
Included ComponentsComputer speakers (with USB to Type-C adapter and 3.5mm Aux cable), User manual
Nylavee SK400 speaker dimensions and specifications
Figure 6: Detailed dimensions and key specifications.

This image provides a visual representation of the dimensions for both the subwoofer and satellite speakers, along with a summary of key specifications like model, net weight, light modes, power input, power supply, connections, and speaker units.

Warranty and Support

The Nylavee SK400 speakers come with an extended warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact Nylavee customer support.

For technical assistance or support inquiries, please visit the official Nylavee website or contact their customer service department. Contact information can typically be found on the product packaging or the brand's official online presence.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.