1. Important Safety Information
Please read all instructions carefully before using the BUVAYE Portable Air Compressor YS01. Failure to follow these safety guidelines may result in injury or damage to the product.
- Keep out of reach of children: This device is not a toy.
- Do not over-inflate: Always check the recommended pressure for the item you are inflating to prevent bursting.
- Avoid prolonged use: Allow the compressor to cool down after 10-15 minutes of continuous operation to prevent overheating.
- Use in well-ventilated areas: Do not operate in enclosed spaces.
- Protect from moisture: Do not expose the device to rain or wet conditions.
- Do not disassemble: Unauthorized disassembly voids the warranty and may cause damage.
- Charge properly: Use only the provided USB-C charging cable.
2. Package Contents
Verify that all items are present in your package:
- 1 x BUVAYE Portable Air Compressor YS01
- 1 x Air Hose with Schrader Valve
- 1 x General Nozzle Cone
- 1 x Needle Adapter (for balls)
- 1 x Presta Adapter (for bicycle tires)
- 1 x USB-C Charging Cable
- 1 x 12V Car Power Cord (2.5m)
- 1 x Carrying Case
- 1 x User Manual
Image: All components included in the BUVAYE Portable Air Compressor YS01 package, including the compressor unit, various adapters, charging cables, and carrying case.
3. Product Overview
The BUVAYE YS01 is a compact and powerful portable air compressor designed for various inflation needs. It features a high-performance motor, a large digital display, and a built-in 7800mAh battery for cordless operation.
Image: The main unit of the BUVAYE YS01 portable air compressor, showcasing its digital display, control buttons, and the attached air hose. Various inflation nozzles are also visible.
Key Features:
- High-Performance Motor: Delivers 25 L/Min airflow and up to 150 PSI pressure.
- 7800mAh Rechargeable Battery: Provides extended cordless operation.
- Digital Display: Shows real-time pressure readings and allows for precise pressure setting.
- Multiple Units: Switch between PSI, kPa, BAR, and KG/CM.
- Automatic Shut-off: Stops inflation once the preset pressure is reached.
- Integrated LED Light: Functions as an inflation light, emergency light, and SOS signal.
- Power Bank Function: Can charge other devices via USB.
- Dual Power Supply: Operates wirelessly with battery or via 12V car power cord.
Image: The BUVAYE YS01 compressor demonstrating its versatility as a power bank for charging a smartphone and its integrated LED light functioning as an emergency light and SOS signal.
4. Setup
4.1 Initial Charging
Before first use, fully charge the compressor's internal battery. Connect the provided USB-C charging cable to the compressor and a suitable USB power adapter (not included). The digital display will indicate charging status. A full charge typically takes several hours.
4.2 Attaching the Air Hose and Adapters
- Screw the air hose securely onto the compressor's air outlet.
- For Schrader valves (common on cars, motorcycles, some bicycles), directly attach the air hose to the valve stem.
- For Presta valves (common on road bicycles), screw the Presta adapter onto the valve stem, then attach the air hose.
- For balls, screw the needle adapter onto the air hose, then insert the needle into the ball's inflation port.
- For other inflatables, use the general nozzle cone if applicable.
5. Operating Instructions
5.1 Powering On/Off
- Power On: Press and hold the power button (usually marked with a power symbol) for a few seconds until the digital display illuminates.
- Power Off: Press and hold the power button again. The device will also automatically power off after a period of inactivity.
5.2 Selecting Units and Modes
After powering on, the display will show the current pressure and the selected unit.
- Change Units: Press the 'M' button (Mode/Unit button) to cycle through pressure units: PSI, kPa, BAR, KG/CM.
- Select Preset Mode: Press the 'M' button repeatedly to select from preset inflation modes (Car, Motorcycle, Bicycle, Ball). Each mode has a default pressure range.
Image: The digital display of the BUVAYE YS01 compressor illustrating the different preset inflation modes for car, motorcycle, bicycle, and ball, along with their typical pressure ranges.
5.3 Setting Target Pressure
Once a mode is selected, or if you are in manual mode, you can adjust the target pressure:
- Use the '+' and '-' buttons to increase or decrease the desired pressure value.
- The display will show the target pressure blinking. Once you stop adjusting, it will set the value.
5.4 Starting and Stopping Inflation
- Connect the air hose to the item to be inflated. The display will show the current pressure of the item.
- Set your desired target pressure.
- Press the inflation button (often marked with a play/pause symbol or a circle) to start inflation.
- The compressor will automatically stop once the target pressure is reached.
- To manually stop inflation, press the inflation button again.
Image: A close-up view of the BUVAYE YS01 compressor inflating a car tire, highlighting its digital display showing pressure and the quick inflation time (1 minute for 30-36 PSI).
5.5 Using the LED Light and Power Bank
- LED Light: Press the light button (often marked with a flashlight symbol) to cycle through different light modes: constant on, emergency flashing, and SOS signal.
- Power Bank: Connect your device's USB charging cable to the USB output port on the compressor to use it as a power bank.
Image: The BUVAYE YS01 compressor being powered by a car's 12V outlet, demonstrating its dual power supply capability alongside its internal 7800mAh battery.
6. Maintenance
6.1 Cleaning
- Wipe the exterior of the compressor with a soft, damp cloth.
- Do not use harsh chemicals or abrasive cleaners.
- Ensure the device is completely dry before storage or next use.
6.2 Storage
- Store the compressor and its accessories in the provided carrying case.
- Store in a cool, dry place, away from direct sunlight and extreme temperatures.
- For long-term storage, charge the battery every 3-6 months to maintain its lifespan.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Compressor does not turn on. | Low battery or no power. | Charge the battery using the USB-C cable or connect to the 12V car power cord. |
| Compressor inflates slowly or not at all. | Hose not securely attached; adapter not suitable; air leak; low battery. | Ensure hose and adapters are tightly connected. Check for leaks. Charge the battery. |
| Inaccurate pressure reading. | Hose not fully connected; sensor issue. | Ensure the hose is fully connected to the valve. If problem persists, contact support. |
| Compressor overheats and shuts off. | Prolonged continuous use. | Allow the compressor to cool down for at least 15-20 minutes before resuming use. |
8. Specifications
| Feature | Specification |
|---|---|
| Brand | BUVAYE |
| Model | YS01 |
| Max Pressure | 150 PSI |
| Airflow Rate | 25 L/Min |
| Battery Capacity | 7800mAh (3*2600mAh Li-ion) |
| Charging Port | USB-C |
| Power Input | 12V DC (via car power cord) |
| Item Weight | 940 g |
| Package Dimensions | 23.1 x 18.5 x 8.3 cm |
| Display Type | Digital |
| Pressure Units | PSI, kPa, BAR, KG/CM |
| LED Light Modes | Constant, Emergency Flash, SOS |
9. Warranty and Support
BUVAYE products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included in your package for specific terms and conditions.
For technical support, troubleshooting assistance, or warranty claims, please contact BUVAYE customer service through the retailer where you purchased the product or visit the official BUVAYE website for contact information.