Beautyrest Heated Throw Blanket (Model BR54-4848)

Introduction

The Beautyrest Heated Throw Blanket provides warmth and comfort with its advanced Secure Comfort technology. This technology intelligently adjusts the blanket's temperature based on overall, spot, and ambient room temperatures, ensuring consistent warmth. It also features virtually no electromagnetic field emissions for peace of mind. Crafted from ultra-soft microlight plush and billowy Berber fabric, this throw is designed for personal targeted heating.

Setup Instructions

Unpacking and Initial Placement

Carefully remove the heated throw blanket from its packaging. Unfold the blanket and lay it flat on a chair, sofa, or bed where it will be used. Ensure the blanket is spread out evenly without any bunches or folds to allow for proper heat distribution.

Figure 1: Heated throw blanket draped over a chair, ready for use.

Connecting the Controller

Locate the detachable controller and its power cord. Connect the controller securely to the blanket's connector. Ensure the connection is firm to prevent interruptions in power or heating. Plug the power cord into a standard 110-120V AC electrical outlet.

Figure 2: Detachable controller connected to the blanket. Ensure a secure connection.

Operating Instructions

Powering On and Adjusting Settings

Press the "ON/OFF" button on the controller to power on the blanket. The controller features 3 heat settings (Low, Medium, High) and a 2-hour auto shut-off timer for safety and convenience.

Figure 3: Controller with clearly marked ON/OFF button, heat settings, and auto shut-off indicator.

• Heat Settings: Use the heat adjustment button to cycle through Low, Medium, and High settings. Select your desired warmth level.
• Auto Shut-Off: The blanket is equipped with a 2-hour automatic shut-off feature for safety. It will power off after 2 hours of continuous use.

Important Safety Guidelines (Do's and Don'ts)

Adhere to the following guidelines to ensure safe operation and prolong the life of your heated blanket:

Figure 4: Visual guide for proper heated blanket usage.

• DO keep the controller uncovered during use to prevent overheating.
• DO spread the blanket out evenly on your body or surface.
• DO keep the power cord loose, not twisted or pinched.
• DO NOT lay on top of the blanket to prevent damage to internal coils.
• DO NOT ball up your blanket while it is on.
• DO NOT fold your blanket while it is on.

Care and Maintenance

The Beautyrest Heated Throw Blanket is machine washable for easy care. Always disconnect the controller and power cord from the blanket before washing.

Washing Instructions

Figure 5: Detaching the coupler before washing is essential.

• Disconnect: Ensure the coupler is fully detached from the blanket.
• Wash: Machine wash on a delicate cycle with minimal detergent in cold water.
• Rinse: Rinse thoroughly in cold water.
• Spin Cycle: Remove immediately after the spin cycle to prevent creasing.

Drying Instructions

Figure 6: Visual guide for drying your heated blanket.

• Tumble Dry: Tumble dry on medium or low heat for 5 minutes.
• Air Dry: Gently stretch the blanket and hang to finish drying.
• DO NOT hang with clothespins, as this can damage the internal wiring.
• DO NOT iron the blanket.

Troubleshooting

If you encounter any issues with your heated throw blanket, refer to the common solutions below:

Figure 7: Common troubleshooting steps for your heated blanket.

• Q: Why is my light blinking?
  A: Unplug and reconnect, ensuring the controller is properly connected. If the issue persists, contact customer support.
• Q: Why does my blanket not heat well?
  A: Ensure the blanket is powered on and set to the maximum level. Allow time for it to heat up.
• Q: Only parts of my blanket are getting warm?
  A: This is usually caused by a bunched or pinched heating element. Lay the blanket flat, untucked, and free from heavy objects. Straighten the heating wires as needed to restore function. Lay the blanket flat and run your fingers along the wire, paying special attention to the top and bottom of the blanket where the wire bends. If any portion of the wire is twisted on itself, manually twist it back.

Product Specifications

Warranty Information

This Beautyrest Heated Throw Blanket includes a manufacturer's 5-year warranty. Please retain your proof of purchase for any warranty claims. For details regarding warranty coverage and claims process, refer to the documentation included with your product or contact customer support.

Customer Support

For further assistance, questions, or to report any issues not covered in this manual, please contact Beautyrest customer support. Contact information can typically be found on the product packaging or the official Beautyrest website.

Manufacturer: E&E Co. Ltd DBA JLA Home