VTOMAN X3 Car Jump Starter with Air Compressor

Introduction

The VTOMAN X3 is a versatile 6-in-1 portable device designed for automotive emergencies and daily utility. It functions as a powerful car jump starter, a 150 PSI tire inflator, a 300-lumen LED flashlight, an SOS warning signal, and a portable power bank. Engineered for reliability and safety, the X3 ensures you are prepared for various situations on the road.

Image: The VTOMAN X3 device highlighting its six functions: Jump Starter, Air Pump, Pressure Gauge, Power Bank, Flashlight, and SOS signal.

Safety Information

Please read all safety warnings and instructions before using this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Do not use the air pump function continuously for extended periods. If the tire compressor becomes hot, allow it to cool down for several minutes before continuing inflation.
• Fully charge the VTOMAN X3 upon first receiving it. Recharge the jump starter every 2-3 months to activate the battery and prolong its lifespan.
• Ensure proper polarity connection when jump starting. The VTOMAN X3 features 10 smart safety protections including automatic connection detection and real-time visual alarms to prevent sparks and ensure safe operation.
• Keep the device away from water, moisture, and extreme temperatures.
• Do not disassemble or modify the device. Refer all servicing to qualified personnel.
• Keep out of reach of children.

Image: Diagram illustrating the advanced protection features of the VTOMAN X3, including 10 safety technologies, 1000+ recycle cycles, and enhanced thermal design for longer service life.

Package Contents

Verify that all items are present in your package:

• VTOMAN X3 Portable Jump Starter and Air Compressor (x1)
• Smart Jumper Cable (x1)
• USB-A to USB-C Cable (x1)
• Carrying Bag (x1)
• Pump Tube (x1)
• Air Nozzles (x3)
• User Manual (x1)

Product Overview

Familiarize yourself with the components of your VTOMAN X3 device:

Image: Front view of the VTOMAN X3 showing the digital display, control buttons, jumper cable ports, and air hose connection.

• Digital Display: Shows battery level, air pressure, and operating modes.
• Control Panel: Buttons for power, mode selection, and pressure adjustment.
• Jump Start Port: For connecting the smart jumper cables.
• Air Compressor Port: For connecting the pump tube and air nozzles.
• USB Output Ports: For charging mobile devices.
• LED Light: Multi-function light for illumination, SOS, and strobe.

Setup

Initial Charging

Before first use, fully charge the VTOMAN X3. Connect the provided USB-A to USB-C cable to the device and a suitable USB power adapter (not included). The digital display will indicate charging status. A full charge is recommended to ensure optimal performance and battery longevity.

Operating Instructions

1. Jump Starting a Vehicle

1. Ensure the VTOMAN X3 is sufficiently charged (at least 50% recommended).
2. Connect the smart jumper cable to the jump start port on the VTOMAN X3.
3. Attach the red clamp (+) to the positive terminal of the vehicle's battery.
4. Attach the black clamp (-) to the negative terminal of the vehicle's battery.
5. Once connected correctly, the smart jumper cable's indicator light will turn green. If it's red or beeping, check connections for proper polarity.
6. Start the vehicle's engine.
7. Once the engine starts, immediately remove the jumper cables from the vehicle battery, then disconnect from the VTOMAN X3.

The VTOMAN X3 can jump start 12V vehicles with up to 8.5L gas or 6.0L diesel engines, even in extreme temperatures (-50°F to 150°F). It also features a BOOST function for completely drained batteries.

Image: The VTOMAN X3 connected to a car battery with jumper cables, illustrating its capability to jump start flat batteries in seconds for various vehicle types and engine sizes.

2. Using the Air Compressor (Tire Inflator)

1. Connect the pump tube to the air compressor port on the VTOMAN X3.
2. Attach the other end of the pump tube to the tire valve. Ensure a secure connection.
3. Press the power button to turn on the device. The digital display will show the current tire pressure.
4. Use the mode button to select the desired inflation mode (SUV, Car, Bicycle, Ball, or Customizable).
5. Adjust the target pressure using the '+' and '-' buttons. The display allows switching between BAR, PSI, and KPA units.
6. Press the start button to begin inflation. The compressor will automatically stop once the preset pressure is reached.
7. Disconnect the pump tube from the tire valve and the device.

The VTOMAN X3 features a maximum pressure of 150 PSI and an airflow of 35 L/min, capable of inflating a standard flat tire (205/55R16) from 25 PSI to 36 PSI in approximately 1 minute.

Image: The VTOMAN X3 inflating a car tire, demonstrating its 150 PSI super fast cordless tire inflator capability with a digital display showing pressure and inflation time.

3. Using the LED Light

The VTOMAN X3 includes a multi-function LED light with three modes:

• Flashlight: Press the light button once to turn on the steady flashlight.
• SOS Signal: Press the light button a second time for the SOS flashing mode.
• Strobe Light: Press the light button a third time for the strobe flashing mode.
• Press the light button a fourth time to turn off the light.

The 300-lumen LED light can last up to 48 hours on a full charge.

Image: The VTOMAN X3 used as a multi-function LED light, showing its flashlight, SOS, and strobe capabilities in a camping scenario.

4. Using as a Power Bank

The VTOMAN X3 can charge your mobile devices via its USB output ports.

1. Connect your device's charging cable to one of the USB output ports on the VTOMAN X3.
2. The VTOMAN X3 will automatically begin charging your device.

Maintenance

• Recharging: To maintain battery health, recharge the VTOMAN X3 every 2-3 months, even if not in use.
• Cleaning: Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Storage: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure it is fully charged before long-term storage.
• Thermal Design: The innovative honeycomb thermal design helps dissipate heat, contributing to a longer lifespan.

Image: A visual representation of the VTOMAN X3's upgraded heat dissipation design, showing airflow through the device.

Troubleshooting

Specifications

Image: The VTOMAN X3 displaying its powerful battery capabilities for inflating various items like car tires, motorcycle tires, bicycle tires, and balls, with approximate inflation counts.

Warranty and Support

VTOMAN provides an 18-month warranty for the X3 Car Jump Starter with Air Compressor. Additionally, lifetime technical support is available. For any post-sales questions or assistance, please do not hesitate to contact VTOMAN customer service. They are available 24/7 to assist you.

Please refer to the contact information provided on the VTOMAN official website or your purchase documentation for direct support channels.