1. Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Zienstar m18 Wireless Vertical Ergonomic Mouse. Please read this manual thoroughly before using the product to ensure proper function and longevity.
2. Product Overview
The Zienstar m18 is a wireless optical mouse designed with an ergonomic vertical orientation to promote a natural hand and wrist posture. It features adjustable DPI settings and is rechargeable for convenience.
2.1 Key Features
- Ergonomic Vertical Design: Reduces wrist strain and promotes a neutral hand position.
- 2.4G Wireless Connectivity: Provides a stable connection up to 10 meters.
- Rechargeable Battery: Built-in lithium-ion battery for extended use.
- Adjustable DPI: Three sensitivity levels (1000-1600-2400 DPI) for precise control.
- Six Buttons: Left, Right, Scroll Wheel, DPI Switch, Previous Page, Next Page.
- Wide Compatibility: Supports Windows, macOS, and Android operating systems.
2.2 Mouse Components

Figure 1: Zienstar m18 Mouse Components. This diagram illustrates the various parts of the mouse, including the scroll wheel, DPI adjustment button, side buttons, charging port, USB receiver slot, and power switch.
- Left Click Button
- Right Click Button
- Scroll Wheel: For vertical scrolling.
- DPI Adjustable Button: Changes mouse sensitivity.
- Previous Page Button: Navigates back in web browsers or file explorers.
- Next Page Button: Navigates forward in web browsers or file explorers.
- Charging Place: USB port for recharging the mouse.
- USB Place: Storage compartment for the 2.4G USB receiver.
- ON/OFF Switch: Powers the mouse on or off.
3. Setup Instructions
- Charge the Mouse: Before first use, connect the mouse to a USB power source using the provided charging cable. A full charge typically takes 2-3 hours.
- Locate the USB Receiver: The 2.4G USB receiver is stored in a compartment on the underside of the mouse. Gently remove it.
- Connect the Receiver: Plug the USB receiver into an available USB port on your computer or compatible device.
- Power On the Mouse: Slide the ON/OFF switch, located on the underside of the mouse, to the "ON" position.
- Automatic Connection: The mouse should automatically connect to your device. No additional drivers are usually required.

Figure 2: Wireless Connection. This image demonstrates the wireless connection of the mouse to a laptop using the 2.4G USB receiver.
4. Operating Instructions
4.1 Basic Usage
Hold the mouse in a handshake position, allowing your hand to rest naturally on its vertical shape. Use the left and right click buttons as you would with a standard mouse. The scroll wheel is located conveniently for your thumb.

Figure 3: Proper Hand Placement. This image illustrates the correct and comfortable way to hold the vertical ergonomic mouse.

Figure 4: Ergonomic Grip. These images show the natural and comfortable grip provided by the vertical design, reducing wrist pronation.
4.2 DPI Adjustment
The mouse features three adjustable DPI settings: 1000, 1600, and 2400. To change the DPI, press the DPI adjustable button located near the scroll wheel. Each press will cycle through the available settings, allowing you to choose the cursor speed that best suits your needs.
4.3 Side Buttons
The two side buttons function as "Previous Page" and "Next Page" by default. These are useful for navigating web pages or folders quickly. Their functionality may vary depending on the application or operating system.
5. Charging the Mouse
The Zienstar m18 mouse is equipped with a rechargeable lithium-ion battery. When the battery is low, the mouse's performance may degrade, or it may stop responding.
- Connect the provided USB charging cable to the charging port on the mouse.
- Plug the other end of the USB cable into a USB power source (e.g., computer USB port, USB wall adapter).
- A full charge typically takes 2-3 hours.
- Once fully charged, the mouse can operate for 1-2 months under normal use, with a standby time of up to 3 months.

Figure 5: Charging and Battery Life. This image shows the mouse connected for charging and details the expected battery performance.
6. Power Saving Mode
The mouse is designed with a 3-stage energy-saving mode to conserve battery life:
- Standby Mode: After approximately 3 seconds of inactivity.
- Deep Sleep Mode: After approximately 9 minutes of inactivity.
- Suspend Mode: After approximately 30 minutes of inactivity, the mouse enters a deeper sleep state.
To wake the mouse from any sleep mode, simply move it or click any button.

Figure 6: Power Saving Modes. This graph details the automatic power-saving stages of the mouse.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the mouse. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the device.
- Storage: When not in use for extended periods, turn off the mouse using the ON/OFF switch and store the USB receiver in its designated compartment.
- Avoid Extreme Conditions: Do not expose the mouse to extreme temperatures, direct sunlight, or excessive moisture.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mouse not responding or erratic movement. |
|
|
| Mouse not charging or charges intermittently. |
|
|
| Buttons stop functioning or become unresponsive. |
|
|
9. Specifications
| Feature | Detail |
|---|---|
| Brand | Zienstar |
| Model Number | m18 wireless |
| Color | Black |
| Connectivity Technology | 2.4G Wireless (USB Receiver) |
| Movement Detection Technology | Optical |
| DPI Settings | 1000 / 1600 / 2400 DPI (Adjustable) |
| Number of Buttons | 6 |
| Hand Orientation | Right |
| Special Feature | Ergonomic Design |
| Operating System Compatibility | Windows, macOS, Android |
| Compatible Devices | Personal Computer, Game Console |
| Battery Type | Lithium-ion (Rechargeable) |
| Charging Time | 2-3 hours (approx.) |
| Working Time (Full Charge) | 1-2 months (approx.) |
| Standby Time (Full Charge) | Up to 3 months (approx.) |
| Wireless Frequency | 2402-2480 MHz |
| Product Dimensions | 138 x 75 x 68 mm |
| Product Weight (in packing) | 156g |
10. Warranty and Support
Specific warranty information for this product is not provided in the available data. For warranty claims or technical support, please refer to the retailer's return policy or contact the seller directly through the platform where the product was purchased.
For general inquiries or further assistance, you may visit the Zienstar brand store: Zienstar Official Store.