AINAVI SW-10 10-inch Active Slim Under Seat Car Subwoofer Instruction Manual

1. Product Overview

The AINAVI SW-10 is a 10-inch active slim car subwoofer designed to enhance your vehicle's audio system with powerful bass. It features a built-in amplifier and a compact design for flexible installation options, such as under a seat or in the trunk. The unit also includes customizable blue LED ambient lighting.

Image: AINAVI SW-10 10-inch Active Slim Under Seat Car Subwoofer with its complete wiring kit and remote control.

2. Package Contents

Verify that all items listed below are included in your package:

• Active Bass Underseat Car Subwoofer
• High to Low Level Adaptor
• Power Cables & Fuse
• RCA Extension Cable
• Remote Control

Image: All components included in the AINAVI SW-10 package, laid out for inspection.

3. Product Features

• Integrated Amplifier: 800 Watts peak power output, 220 Watts RMS, with high-speed MOSFET power supply.
• Slim Design: 10-inch active subwoofer in a sealed aluminum enclosure, ideal for under-seat installation.
• Adjustable Controls: Variable Low-Pass Filter (50Hz-250Hz), Variable Bass Boost (+0dB to +12dB), and Input Gain (MIN/MAX) for sound customization.
• High/Low-Level Inputs: Offers flexibility for connection to various car audio systems.
• Ambient LED Lighting: Features blue ambient lighting, controllable via a smartphone app or the included remote controller.
• Compact Dimensions: 343mm x 260mm x 82mm (13.5" x 10.2" x 3.2"), weighing 8 lbs.

4. Specifications

Image: Dimensions of the AINAVI SW-10 subwoofer, illustrating its compact size for discreet installation.

5. Setup and Installation

This section provides detailed instructions for installing your AINAVI SW-10 subwoofer. Professional installation is strongly recommended for optimal performance and safety.

Installation Steps:

1. Remove Factory Stereo: Carefully remove and unplug your vehicle's factory car stereo.
2. Test Speakers: Use a multimeter and a small battery to test the existing speakers and identify their wiring.
3. Connect TSK TD-22 Converter: Locate the wiring for the front door speakers. Connect a TSK TD-22 converter to these wires using the existing speaker cables. The converter's input/output wires are typically L+, L-, R+, R-, 12V, GND, and REM.
4. Splice Power and Speaker Wires: Utilize a T-connector to splice into the vehicle's existing power and speaker wires, connecting them to the TSK TD-22 converter.
5. Plug in RCA and REM Wire: Plug the RCA cable into the converter and connect the blue REM (remote turn-on) wire.
6. Route RCA and REM Wires: Feed the RCA and blue REM wires from the head unit area under the passenger seat, towards the intended subwoofer location.
7. Route Power Wire: Feed the red power wire from the engine compartment (connected to the car battery's positive terminal) through the firewall and into the cabin, leading it under the passenger seat.
8. Ground Wire Connection: Connect the black ground wire to a suitable metal screw or chassis point under the seat to ensure a secure ground connection.
9. Cable Management: Route all wires neatly under the front seats and hide all cables to ensure a clean and safe installation.
10. Connect Subwoofer Cables: Connect all power, ground, RCA, and remote wires to the corresponding terminals on the subwoofer unit. Ensure all connections are secure.
11. Connect Battery Terminal: Reconnect the positive terminal of your car battery.
12. Test Functionality: Plug in the subwoofer's remote controller and test the subwoofer's functionality.
13. Adjust Settings: Adjust the subwoofer's settings (Phase, Low Pass Filter, Bass Boost, Input Gain) to your preferred audio output. The 'POWER GREEN' light should turn blue when the subwoofer is working. If it doesn't, press the 'AUTO POWER ON' button.
14. Final Placement: For a clean and discreet installation, place the device under the passenger seat and adjust the seat cushion to conceal it.

Image: Detailed wiring diagram for connecting the AINAVI SW-10 subwoofer to a car stereo system.

6. Operating Instructions

Once installed, the AINAVI SW-10 subwoofer offers several adjustable controls to fine-tune your audio experience:

• Phase Switch (0°/180°): Adjust this switch to match the phase of your main speakers. Experiment with both settings to find the one that provides the most coherent bass response.
• Low-Pass Filter (LPF) (50Hz-150Hz): This control allows you to set the upper frequency limit for the subwoofer. Frequencies above this setting will be filtered out. Adjust it to blend smoothly with your main speakers.
• Bass Boost (0dB to +12dB): Use this control to increase the bass output at a specific frequency, typically around 45Hz. Adjust to your preference for added impact.
• Input Gain (MIN/MAX): This control matches the output level of your car stereo to the input sensitivity of the subwoofer. Start at MIN and slowly increase until the desired volume is achieved without distortion.
• Remote Control: The included remote allows for convenient adjustment of bass levels from your driving position.
• Ambient Light Control: The blue LED ambient light can be controlled via a smartphone app or the remote controller, allowing you to customize the aesthetic.

Image: Control panel of the AINAVI SW-10 subwoofer, highlighting the adjustable settings.

7. Maintenance

To ensure the longevity and optimal performance of your AINAVI SW-10 subwoofer, follow these maintenance guidelines:

• Cleaning: Regularly wipe the exterior of the subwoofer with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
• Ventilation: Ensure the subwoofer's ventilation areas are clear of obstructions to prevent overheating.
• Cable Inspection: Periodically check all wiring connections for tightness and signs of wear or damage. Secure any loose connections.
• Environmental Conditions: Avoid exposing the subwoofer to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture. The unit is not water-resistant.

8. Troubleshooting

If you encounter issues with your AINAVI SW-10 subwoofer, refer to the following common troubleshooting steps:

• No Power:
  • Check the power and ground connections at the subwoofer and the car battery.
  • Verify the fuse in the power cable is intact. Replace if blown.
  • Ensure the remote turn-on (REM) wire is properly connected and receiving a signal from the head unit.
  • Confirm the 'AUTO POWER ON' switch on the subwoofer is set correctly (ON or OFF depending on your head unit's remote output).
• No Sound:
  • Check RCA or high-level input connections from the head unit to the subwoofer.
  • Ensure the input gain is not set to minimum.
  • Verify the head unit's subwoofer output is enabled and volume is up.
  • Check the Low-Pass Filter setting; if set too low, you might not hear any output.
• Distorted Sound:
  • Reduce the input gain on the subwoofer.
  • Lower the bass boost setting.
  • Check for loose speaker wires or damaged cables.
• Subwoofer Overheating (PROTECT RED light on):
  • Ensure adequate ventilation around the subwoofer.
  • Reduce the volume or input gain.
  • Check for proper impedance matching if using external speakers with the high-level input.

9. Warranty and Support

AINAVI provides a one-year product warranty for the SW-10 subwoofer. For technical support, warranty claims, or any other inquiries, please contact AINAVI customer service.

Contact Information:

• Via Amazon Email: Contact us through the Amazon platform for prompt assistance.
• Customer Service Phone: +1 (833) 858-5016
• Working Hours: 01:00 PM to 00:00 AM PST
• Email: info@ainavi.com

Image: AINAVI customer support contact details for assistance.