1. Introduction
The XTAR-Link EL3 V2 is a DC power supply designed to provide a professional and reliable power solution for Starlink Standard ACTUATED (Gen 2) dishes. This unit integrates a booster, PoE injector, and 12V voltage regulator into a single device, simplifying the power setup for your Starlink system. It enables direct connection to 12V/24V battery systems, such as those found in RVs, boats, and off-grid solar installations, offering enhanced portability and power efficiency. The EL3 V2 is engineered to reduce power consumption and minimize the complexity associated with DIY power solutions, ensuring a stable and safe connection to the Starlink network.
2. Package Contents
Verify that all items listed below are included in your package:
- 1x XTAR-Link EL3 V2 Unit
- 1x Power Cable for EL3 V2 (O-ring to Anderson connector)
- 1x RJ45 Adapter for Gen2 Dish (Actuated Standard)
- 1x RJ45 Cable A for Dishy Adapter
- 1x Third-party Router: WiFi 6 (574 Mbps/2.4 GHz & 1000 Mbps/5 GHz)
- 1x RJ45 Cable for Router
- 1x Power Cable for Third-party Router (DC5521 Male to DC5521 Male)
- 1x Additional AC Power Adapter for Third-party Router
Image: Overview of the XTAR-Link EL3 V2 SET package contents, showing the main unit, various cables, the RJ45 adapter, and the included WiFi 6 router.
3. Setup Instructions
Follow these steps to set up your XTAR-Link EL3 V2 DC Power Supply with your Starlink Gen 2 dish and third-party router.
- Connect the Starlink Dish: Connect your Starlink Gen 2 dish cable to the provided RJ45 Adapter. Ensure the connection is secure.
- Connect Adapter to EL3 V2: Use RJ45 Cable A to connect the RJ45 Adapter to the 'POE OUTPUT' port on the XTAR-Link EL3 V2 unit.
- Connect EL3 V2 to Power Source: Use the O-ring to Anderson power cable to connect the XTAR-Link EL3 V2 unit to your 12V/24V battery system. Ensure correct polarity. The EL3 V2 features a power switch and indicator light for safe operation.
- Connect Third-party Router: Connect the provided third-party WiFi 6 router to the 'LAN' port on the XTAR-Link EL3 V2 unit using the RJ45 Cable for Router.
- Power the Router: Use the DC5521 Male to DC5521 Male power cable to connect the router to the '12V OUTPUT' port on the XTAR-Link EL3 V2 unit. Alternatively, use the additional AC power adapter for the router if an AC source is preferred for the router itself.
- Verify Connections: Double-check all cable connections to ensure they are firm and correctly seated. The power indicator light on the EL3 V2 should illuminate when powered on.
Note: The XTAR-Link EL3 V2 is designed for a plug-and-play experience, requiring no wire cutting or modifications to your Starlink dish or cable, thus preserving your Starlink warranty.
Image: Connection diagram illustrating the setup of the Starlink Gen 2 dish, XTAR-Link EL3 V2, third-party router, and a 12/24V battery power source.
Image: A user setting up the XTAR-Link EL3 V2 with a laptop and Starlink dish on an outdoor table, demonstrating a typical use case.
Image: Detailed view of the XTAR-Link EL3 V2 unit, highlighting the various ports and connected cables for the Starlink dish and router.
4. Operating Instructions
Once the XTAR-Link EL3 V2 is correctly set up and connected to a 12V/24V power source, operate the unit as follows:
- Power On/Off: Locate the power switch on the EL3 V2 unit. Toggle the switch to the 'ON' position to power the unit and connected Starlink dish. The power indicator light will illuminate. Toggle to 'OFF' to power down.
- Starlink Operation: The Starlink dish will initiate its startup sequence and attempt to connect to the Starlink network. You can monitor its status via the Starlink app.
- Router Operation: The included WiFi 6 router will broadcast a Wi-Fi signal. Connect your devices (laptops, smartphones, etc.) to this Wi-Fi network to access the internet. Refer to the router's specific instructions for initial setup and password details.
- Versatile Power Compatibility: The EL3 V2 allows your Starlink dish to be powered directly from various 12V/24V battery systems, making it suitable for mobile applications in RVs, boats, and other off-grid environments.
5. Power Saving Features
The XTAR-Link EL3 V2 is designed to optimize power consumption for your Starlink system:
- Reduced Power Loss: By converting 12V/24V DC directly to the required 48V for the Starlink dish and providing a regulated 12V for the router, the EL3 V2 eliminates the need for inefficient DC-AC-DC conversions. This significantly reduces energy loss compared to using an AC inverter.
- Up to 30% Power Savings: This direct DC conversion and integrated regulation can result in up to 30% power savings for the entire Starlink setup, including both the dish and the third-party router. This is particularly beneficial for battery-powered applications where energy efficiency is critical.
Image: A diagram comparing the power flow and losses in a traditional Starlink setup using an AC inverter versus the efficient direct DC conversion provided by the XTAR-Link EL3 V2.
Image: The XTAR-Link EL3 V2 unit placed inside an RV, visually representing its application in mobile environments and its benefit of 30% power savings.
6. Maintenance
The XTAR-Link EL3 V2 is designed for durability and minimal maintenance:
- Casing Protection: The unit features a waterproof, shockproof, and corrosion-resistant metal casing, providing robust protection in various environments.
- Cleaning: Periodically wipe the exterior of the unit with a soft, dry cloth to remove dust and debris. Do not use harsh chemicals or abrasive cleaners.
- Inspection: Regularly inspect all cables and connectors for any signs of wear, damage, or loose connections. Ensure the built-in fuses are intact.
- Ventilation: Ensure the unit's ventilation fins are not obstructed to allow for proper airflow and heat dissipation.
7. Troubleshooting
If you encounter issues with your XTAR-Link EL3 V2, refer to the following troubleshooting guide:
- No Power to Starlink Dish:
- Ensure the EL3 V2 power switch is in the 'ON' position and the power indicator light is illuminated.
- Verify that the 12V/24V battery source is adequately charged and providing power.
- Check all power cable connections (O-ring to Anderson, and internal fuses) for secure fit and integrity.
- Confirm the RJ45 Adapter and RJ45 Cable A connections between the Starlink dish and the EL3 V2 'POE OUTPUT' port are secure.
- No Internet Connection via Router:
- Ensure the Starlink dish is successfully connected to the network (check via Starlink app).
- Verify the RJ45 Cable connecting the router to the EL3 V2 'LAN' port is secure.
- Confirm the router is powered on (either via EL3 V2 '12V OUTPUT' or its own AC adapter).
- Access the router's administration interface (usually via a web browser) to verify its configuration. Ensure it is set to obtain an IP address automatically from the EL3 V2. If issues persist, a factory reset of the router and re-configuration may be necessary.
- Reduced Performance:
- Ensure the Starlink dish has a clear view of the sky.
- Check for any obstructions around the EL3 V2 unit that might impede ventilation.
- Verify the integrity of all cables; damaged cables can affect performance.
8. Specifications
| Feature | Specification |
|---|---|
| Model Name | XTAR-Link EL3 V2 SET |
| Brand | XTAR |
| Compatible Devices | Starlink Dish (Gen 2 Actuated Standard), Third-party Router |
| Connector Type | Barrel, RJ45 |
| Wattage | 120 watts |
| Cooling Method | Air |
| Maximum Input Voltage | 48 Volts (DC) |
| Minimum Input Voltage | 110 Volts (AC) (for router AC adapter only) |
| Item Weight | 3.16 pounds |
| Package Dimensions | 10.63 x 9.8 x 3.46 inches |
| UPC | 768795453691 |
9. Warranty and Support
For warranty information and technical support, please refer to the official XTAR website or contact your retailer. Keep your purchase receipt for warranty claims. XTAR is committed to providing reliable products and customer assistance.
