1. Product Overview
The HOLDLAMP ZQ01449 is a 3X6W RGBW 4-in-1 battery-powered LED Par Light designed for stage lighting, uplighting, and event illumination. It features multiple control modes, including DMX, sound activation, and remote control, offering versatile lighting solutions for various applications.
Figure 1: Front view of the HOLDLAMP ZQ01449 RGBW LED Par Light, showcasing its compact design and LED array.
1.1 What's in the Box
- LED Par Light (ZQ01449) x 1
- Remote Control x 1
- Power Cord x 1
- Instruction Manual x 1
2. Safety Instructions
- Read all instructions carefully before operating the device.
- Keep this manual for future reference.
- Ensure the power supply matches the voltage requirements of the device.
- Do not expose the device to rain or moisture to avoid electric shock or fire.
- Avoid direct eye exposure to the light source.
- Do not attempt to repair the device yourself. Refer all servicing to qualified personnel.
- Ensure proper ventilation to prevent overheating.
3. Product Features
- Efficient Heat Dissipation: Fanless design with aluminum material ensures quiet operation and effective heat management.
- Long-Lasting Performance: Durable construction and LED lifespan reduce the need for frequent replacements.
- Extended Battery Life: Single color run time: 10 hours; Double color run time: 8 hours; All colors run time: 6 hours.
- Quick Recharge: Fully recharges in approximately 5 hours.
- Multiple Control Modes: Auto, Strobe, Fade, Master-Slave, Sound Activated, and DMX modes.
- DMX Control: Supports 4, 6, or 8 DMX channels for professional lighting setups.
- Dimmable & Strobe: 0-100% linear dimming and adjustable strobe speed via remote or onboard buttons.
- High Brightness: 4800 lux output suitable for large-scale events.
- Versatile Installation: Can be placed on the floor, used as a wall washer, or mounted on a truss with an M10 light hook.
4. Components and Controls
4.1 Product Diagram
Figure 2: The LED Par Light showing its dimensions (Length: 4.9 inches, Width: 4.9 inches, Height: 6.7 inches) and the included IR remote control.
4.2 Control Panel
Figure 3: The display panel and control buttons on the LED Par Light. The battery indicator shows remaining power and charging status.
- Display: 4-alphanumeric display for mode and setting information.
- MENU Button: Navigates through different modes and settings.
- UP/DOWN Buttons: Adjusts values or selects options.
- ENTER Button: Confirms selections.
- MIC: Built-in microphone for Sound Activated mode.
- DMX IN/OUT: XLR connectors for DMX control.
- Power IN/OUT: Connects to power source and allows daisy-chaining power to other units.
- Power ON/OFF Switch: Main power switch for the unit.
5. Setup
5.1 Initial Charging
Before first use, fully charge the LED Par Light. Connect the provided power cord to the 'Power IN' port and plug it into a standard electrical outlet. The battery indicator on the display will show charging status. A full charge takes approximately 5 hours.
5.2 Powering On/Off
To power on the device, flip the 'Power ON/OFF' switch to the 'ON' position. To power off, flip the switch to 'OFF'.
5.3 Placement Options
The versatile design allows for various placement methods:
Figure 4: The light can be positioned in multiple ways to suit different event setups, including floor standing, wall washing, or truss mounting.
- Floor Standing: Place the unit directly on a flat surface.
- Wall Washer: Lay the unit on its side to project light upwards or across a wall.
- Truss Mounting: Secure the unit to a truss using an M10 light hook (not included). Ensure the control panel is aligned with the light bead panel for optimal remote control reception.
6. Operating Modes
The HOLDLAMP ZQ01449 offers six primary control modes, accessible via the onboard control panel or the included IR remote control.
Figure 5: This image illustrates the diverse control options available for the LED Par Light, allowing for flexible lighting effects.
6.1 Using the Control Panel
Use the MENU button to cycle through the main modes. Use UP/DOWN to adjust settings within a mode, and ENTER to confirm.
6.2 Remote Control Operation
Point the IR remote control directly at the light's sensor for effective operation. The remote allows direct selection of colors, modes, and adjustments to brightness and strobe speed.
6.3 Available Modes
- Auto Mode: The light cycles through pre-programmed color changes and effects automatically.
- Strobe Mode: Produces a flashing light effect. Strobe speed can be adjusted.
- Fade Mode: Colors smoothly transition from one to another.
- Sound Activated Mode: The light reacts to ambient sound and music, changing patterns and colors.
- Master-Slave Mode: Connect multiple units via DMX cables. One unit acts as the master, controlling all other slave units.
- DMX Mode: For professional control using a DMX controller. Supports 4, 6, or 8 channels. Refer to the DMX chart in the full manual for channel assignments.
Video 1: An official product video showcasing the various lighting effects, control modes, and portability of the HOLDLAMP ZQ01449 LED Par Light.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | ZQ01449 |
| Light Source Type | Light Emitting Diode (LED) |
| Wattage | 18 Watts |
| Voltage | 110 Volts (AC) |
| Power Source | Battery Powered |
| Battery Type | 1 C battery (included) |
| Material | Aluminum |
| Finish Type | Aluminum |
| Shape | Triangular |
| Product Dimensions | 4.7"L x 5.3"W x 5.3"H |
| Item Weight | 2.94 pounds |
| Beam Angle | 25 Degrees |
| Bulb Features | Dimmable |
| Mounting Type | Floor Mount, Truss Mount |
8. Maintenance
8.1 Cleaning
To maintain optimal performance and appearance, regularly clean the exterior of the LED Par Light with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the device is powered off and unplugged before cleaning.
8.2 Storage
When not in use for extended periods, store the light in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to store the unit in its original packaging or a protective case.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power, low battery, power switch off | Check power connection, charge battery, ensure power switch is ON. |
| Remote control not working | Remote battery dead, obstruction, not pointed at sensor | Replace remote battery, remove obstructions, ensure remote is pointed at the light's IR sensor. |
| Light not responding in DMX mode | Incorrect DMX address, faulty DMX cable, DMX controller issue | Verify DMX address, check DMX cable connections, test with another DMX controller if possible. |
| Sound Activated mode not working | No sound input, microphone obstructed, sensitivity too low | Ensure music is playing near the light, check microphone for obstructions, adjust sound sensitivity if available. |
10. Warranty and Support
This HOLDLAMP product typically comes with a 1-year manufacturer's warranty from the date of purchase, covering defects in materials and workmanship. Please retain your proof of purchase for warranty claims.
For technical support, warranty service, or inquiries about replacement parts, please contact HOLDLAMP customer service through the retailer where the product was purchased or visit the official HOLDLAMP website for contact information.