1. Introduction
This manual provides essential information for the safe and efficient operation of your Candy HE4 1274TWM6/1-S Slim Washing Machine. Please read these instructions carefully before installation and use, and retain them for future reference.
The Candy HE4 1274TWM6/1-S is a front-loading slim washing machine with a 7 kg capacity and a maximum spin speed of 1200 rpm, designed for efficient laundry care.
2. Safety Information
General Safety:
- Ensure the appliance is properly earthed.
- Do not allow children to play with the appliance.
- Do not touch the appliance with wet hands or feet.
- Unplug the appliance before cleaning or maintenance.
- Do not install the appliance in a damp place or where it may be exposed to water.
Installation Safety:
- Remove all transit bolts before use. Failure to do so may cause severe damage.
- Ensure the water inlet and drain hoses are correctly connected and secured.
- The appliance must be leveled correctly to prevent excessive vibration and noise.
3. Product Overview
Familiarize yourself with the main components of your washing machine.
Figure 1: Front view of the Candy HE4 1274TWM6/1-S Slim Washing Machine. This image shows the main control panel with digital display, program selector knob, detergent dispenser, and the large front-loading door.
4. Setup and Installation
4.1 Unpacking
- Remove all packaging materials, including the polystyrene base and any protective film.
- Carefully remove the transit bolts located at the rear of the machine. Keep these bolts for future transport.
4.2 Placement
- Place the washing machine on a firm, flat floor.
- Ensure there is adequate space around the machine for ventilation and access.
4.3 Leveling
- Adjust the adjustable feet at the bottom of the machine until it is perfectly level. Use a spirit level to verify.
- Tighten the lock nuts on the feet to secure them in position.
4.4 Water Connection
- Connect the water inlet hose to a cold water tap with a 3/4" thread.
- Ensure all connections are tight to prevent leaks.
4.5 Drain Connection
- Position the drain hose into a standpipe or over the edge of a sink, ensuring it is securely fixed to prevent displacement during operation.
- The drain hose should be positioned at a height between 60 cm and 100 cm from the floor.
4.6 Electrical Connection
- Plug the power cord into a grounded electrical outlet.
- Ensure the voltage and frequency match the specifications on the appliance rating plate.
5. Operating Instructions
5.1 Control Panel
The control panel consists of a program selector knob, a digital display, and various function buttons. Refer to Figure 1 for a visual representation.
- Program Selector Knob: Used to select the desired wash program.
- Digital Display: Shows program duration, remaining time, error codes, and selected options.
- Function Buttons: Allow adjustment of temperature, spin speed, delay start, and other special features.
5.2 Loading Laundry
- Open the washing machine door.
- Load laundry into the drum, ensuring not to overload. The maximum capacity is 7 kg.
- Close the door firmly until it clicks.
5.3 Adding Detergent
- Pull out the detergent dispenser drawer.
- Add detergent to the main wash compartment and fabric softener to the designated compartment. Follow detergent manufacturer's instructions for dosage.
- Push the dispenser drawer back in completely.
5.4 Selecting and Starting a Program
- Turn the program selector knob to choose the desired wash program (e.g., Cotton, Synthetics, Delicates).
- Adjust temperature and spin speed using the corresponding buttons if desired.
- Press the 'Start/Pause' button to begin the wash cycle.
5.5 End of Cycle
- The machine will signal the end of the cycle.
- Open the door and remove the laundry.
- Leave the door slightly ajar to allow the drum to dry and prevent odors.
6. Maintenance
6.1 Cleaning the Detergent Dispenser
- Pull out the dispenser drawer completely.
- Remove any residue and wash the drawer under running water.
- Clean the housing of the dispenser drawer with a brush.
- Reinsert the drawer.
6.2 Cleaning the Filter
- Locate the filter cover at the bottom front of the machine.
- Place a shallow container beneath the filter to collect any residual water.
- Carefully unscrew the filter and remove any lint, coins, or foreign objects.
- Clean the filter under running water and screw it back in securely.
6.3 Cleaning the Exterior
- Wipe the exterior surfaces with a soft, damp cloth.
- Do not use abrasive cleaners or solvents.
6.4 Drum Care
- Periodically run a maintenance wash cycle (e.g., a hot wash with no laundry and a descaling agent) to prevent limescale and odors.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not start | Power cord not plugged in; Door not closed properly; Program not selected. | Check power connection; Ensure door is latched; Select a program and press start. |
| No water intake | Water tap closed; Inlet hose kinked; Water supply cut off. | Open water tap; Straighten hose; Check household water supply. |
| Machine vibrates excessively | Transit bolts not removed; Machine not level; Uneven load. | Remove transit bolts; Adjust leveling feet; Redistribute laundry in the drum. |
| Water not draining | Drain hose kinked or blocked; Filter blocked. | Check and clear drain hose; Clean the filter. |
8. Specifications
- Model: Candy HE4 1274TWM6/1-S
- Type: Front-loading Slim Washing Machine
- Capacity: 7 kg
- Maximum Spin Speed: 1200 rpm
- Energy Efficiency Class: A
- Dimensions (H x W x D): 85 cm x 60 cm x 45 cm
- Noise Level (Spin): 74 dB
- Color: White
9. Warranty and Support
For warranty information, please refer to the warranty card provided with your appliance or visit the official Candy website. For technical assistance or customer support, please contact your local Candy service center.
You can find more information and support resources on the Candy Official Store.
