BACEKOLL Plant Stand Indoor with Grow Light Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your BACEKOLL Plant Stand Indoor with Grow Light. This 54.6-inch tall, 9-tiered, S-shaped plant shelf is designed to display multiple plants and includes integrated full-spectrum grow lights to support healthy plant growth indoors. Please read all instructions carefully before assembly and use.

Safety Information

General Safety Guidelines

• Ensure all screws are tightened securely during assembly to prevent instability.
• Do not overload shelves beyond their recommended weight capacity.
• Use the included furniture straps to secure the plant stand to a wall, especially in households with children or pets, to prevent tipping.
• Keep electrical components (grow lights, power cords) away from water and excessive moisture.
• Do not attempt to modify the electrical wiring or grow lights. Contact customer support if issues arise.
• Place the stand on a flat, stable, and level surface.

Package Contents

Verify All Parts

Before beginning assembly, please ensure all components listed below are present. Refer to the assembly diagram for visual identification.

Setup and Assembly

Step-by-Step Assembly Guide

Follow these instructions carefully for proper assembly. An Allen wrench and screwdriver are included.

1. Assemble the Base Units: Begin by attaching the shorter metal support bars to the base wooden panels using the provided screws. Ensure the holes align correctly.
2. Construct the Lower Tiers: Connect the assembled base units with the next set of wooden shelves and metal supports. Pay close attention to the direction of the S-shaped metal pipes as indicated in the diagrams to ensure correct orientation.
3. Attach the Main S-Shaped Frame: Secure the larger S-shaped metal frame pieces to the lower tiers and progressively add the remaining wooden shelves. Tighten all connections as you go.
4. Install Upper Shelves: Continue attaching the remaining shelves to the S-shaped frame, ensuring all connections are tight and stable.
5. Mount Grow Lights: Affix the LED grow light strips to the underside of the designated shelves using the adhesive strips or screws provided. Route the cables neatly using the included zip ties along the metal frame to maintain a clean appearance.
6. Secure to Wall (Optional but Recommended): For enhanced stability, especially in homes with children or pets, use the furniture straps to anchor the top of the plant stand to a wall.

Assembly Video Tutorial

Video 1: A detailed video demonstrating the step-by-step assembly process of the plant stand, including how to connect the frame and shelves, and install the grow lights.

Operating Instructions (Grow Lights)

Using Your Full-Spectrum Grow Lights

The integrated grow lights are designed to provide optimal light for your plants, simulating natural daylight for healthy growth.

• Power On/Off: Connect the USB power adapter to a power source. Use the power button on the inline controller to turn the lights on or off.
• Brightness Adjustment: Use the '+' and '-' buttons on the controller to adjust the brightness of the lights. There are 10 dimming levels available to suit different plant needs.
• Timer Function: Set the lights to automatically turn off after a specific duration using the timer button. Options typically include 3, 9, or 12 hours. The lights will automatically turn on at the same time the next day, providing a consistent light cycle.
• Light Mode Selection: The controller may offer different light modes (e.g., full spectrum, red/blue spectrum). Select the mode best suited for your plants' growth stage and type.

Maintenance

Care for Your Plant Stand

Regular maintenance will ensure the longevity and appearance of your plant stand.

• Cleaning: Wipe down wooden shelves and metal frames with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
• Watering: Be careful when watering plants to avoid spilling water directly onto the grow lights or electrical components. While the particle boards have a water-resistant coating, excessive moisture should be avoided to prevent damage.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.
• Light Care: Keep the LED strips clean from dust to maintain optimal light output. Gently wipe with a dry, soft cloth.

Troubleshooting

Common Issues and Solutions

Specifications

Product Details

Warranty and Support

Customer Service

For warranty information, technical support, or replacement parts, please contact BACEKOLL customer service through the retailer where the product was purchased. Keep your purchase receipt for proof of purchase.