Introduction
This manual provides instructions for the assembly, operation, and maintenance of your 5Rcom Universal Swivel TV Floor Stand. This stand is designed to support 32-55 inch TVs up to 40 kgs, offering height adjustment and swivel functionality. Please read this manual thoroughly before assembly and use to ensure safe and correct operation.
Safety Information
- Ensure all components are present and undamaged before assembly.
- Do not exceed the maximum weight capacity of 40 kgs for the TV mount and 10 kgs for the media shelf.
- Verify your TV's VESA pattern (100x100mm to 400x400mm) and weight are compatible before purchase.
- Assemble on a soft, clean surface to prevent scratches.
- Always use two people for lifting and mounting the TV.
- Keep children and pets away during assembly.
- Tighten all screws securely, but do not overtighten.
- Regularly check the stand for stability and tightness of connections.
Package Contents
Please check that all parts are included in your package. If any parts are missing or damaged, contact customer support.
(A detailed list of individual components is typically provided in the physical manual.)
Setup and Assembly
Follow these steps carefully to assemble your TV floor stand.
- Step 1: Assemble the Base and Support Column. Attach the main support column to the wooden base using the provided hardware. Ensure it is stable and secure.
Image: Assembly steps 1, 2, and 3. Step 1 shows the main column being attached to the base.
- Step 2: Install the Media Shelf. Secure the height-adjustable media shelf to the support column at your desired height. This shelf can hold AV components up to 10 kgs.
Image: Assembly steps 1, 2, and 3. Step 2 shows the media shelf being attached to the column.
- Step 3: Attach the TV Mounting Brackets. Fasten the TV mounting brackets to the back of your television, ensuring they align with the VESA holes. Refer to your TV's manual for specific VESA pattern details.
Image: Assembly steps 1, 2, and 3. Step 3 shows the TV mounting brackets being attached to the TV.
- Step 4: Mount the TV to the Stand. Carefully lift the TV with the attached brackets and hook them onto the main support column's mounting plate. Secure the TV using the safety lock mechanism.
Image: Close-up of the safety lock mechanism, cable management, and non-slip pads.
- Step 5: Cable Management. Utilize the integrated back clip system to organize and conceal cables for a clean appearance.
Image: Close-up of the cable management clips.
- Step 6: Optional Support Feet. If placing the stand freely (not against a wall), attach the additional support feet for enhanced stability. These can be removed for space-saving when placed against a wall.
Image: Close-up of the non-slip pads, which are part of the base support.
Operating Instructions
Swivel Function
The TV stand allows for a swivel range of up to 35 degrees left and 35 degrees right. Gently rotate the TV to achieve your desired viewing angle.
Image: Illustration of the TV stand's 35-degree left and right swivel range.
Height Adjustment
The TV mounting plate can be adjusted vertically to achieve optimal viewing height. The stand offers a height range from approximately 1138mm to 1188mm (from floor to top of the column). To adjust, loosen the securing bolts on the main column, slide the TV mount to the desired height, and re-tighten the bolts securely.
Image: Diagram illustrating the height adjustment range of the TV stand.
Maintenance
- Clean the stand with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Periodically check all screws and bolts to ensure they remain tight and secure.
- Do not hang objects from the TV or stand.
- Keep the stand away from direct sunlight and moisture.
Troubleshooting
- Problem: TV stand feels unstable.
Solution: Ensure all screws are tightened properly. Verify the TV weight does not exceed 40 kgs. If not placed against a wall, ensure the optional support feet are installed. Place the stand on a flat, level surface.
- Problem: TV is not level.
Solution: Check that the TV mounting brackets are installed evenly on the back of the TV and that the TV is properly seated on the stand's mounting plate.
- Problem: Cannot swivel the TV.
Solution: Ensure no cables are obstructing the swivel mechanism. Do not force the swivel beyond its intended range.
Specifications
| Feature | Detail |
|---|---|
| Compatible TV Sizes | 32-55 inches |
| Maximum TV Weight Capacity | 40 kgs |
| VESA Compatibility | 100x100 mm to 400x400 mm |
| Media Shelf Capacity | 10 kgs |
| Height Adjustment Range | 1138mm to 1188mm (approximate, from floor to top of column) |
| Swivel Angle | +/- 35 degrees |
| Base Dimensions | 425mm x 325mm |
| Material | Wood (base), Metal (column, mount) |
| Color | White |
| Product Dimensions | 49.9 x 32.5 x 134.3 cm; 6.91 kg |
Image: Detailed dimensions of the TV stand components.
Warranty and Support
For warranty information or technical support, please contact 5Rcom customer service. Refer to your purchase documentation for specific contact details.
