Manuals+

Sonata 87058PP03

Sonata SF Vigour Quartz Digital Analog Watch Model 87058PP03 User Manual

Introduction

Welcome to the user manual for your new Sonata SF Vigour Quartz Digital Analog Watch, Model 87058PP03. This guide provides detailed instructions on how to set up, operate, maintain, and troubleshoot your watch to ensure optimal performance and longevity. Please read this manual carefully before using your watch.

Product Overview

The Sonata SF Vigour watch combines digital and analog displays, offering a range of features including an alarm, hourly chime, synchronized movement, EL backlight, world time, calendar, timer, 12/24 hour format, and a stopwatch. Its robust design with a black dial and plastic strap makes it suitable for unisex wear.

Key Features

  • LCD Display: Shows Hour, Minute, Second, Month, Day, and Week.
  • Daily Alarm and Hourly Chime.
  • 60-minute Countdown Timer.
  • Dual Time Function.
  • EL Backlight for low-light visibility.
  • Stopwatch with 1/100 second accuracy.
  • Water Resistance up to 50 meters (5 ATM).
Front view of the Sonata SF Vigour Quartz Digital Analog Watch, black with gold accents.

Figure 1: Front view of the Sonata SF Vigour Quartz Digital Analog Watch, showcasing its black dial with gold accents and digital display.

Initial Setup

Battery Activation

Your watch comes with a Lithium Polymer battery pre-installed. It is ready for immediate use. If the display is dim or unresponsive, the battery may need to be activated or replaced by a qualified technician.

Setting Time and Date

The watch features multiple buttons for setting. Typically, the 'MODE' button cycles through different settings (Time, Alarm, Stopwatch, Timer, Dual Time). Use the 'RESET' or 'START' buttons to adjust values once a setting is selected. Refer to the button layout below for general guidance.

Side view of the Sonata SF Vigour Quartz Digital Analog Watch, showing control buttons on the left and right sides.

Figure 2: Side view of the watch, highlighting the control buttons used for navigation and adjustments.

  • Analog Time Setting: Pull out the crown (usually on the right side) and rotate it to set the analog hands. Push it back in to secure the time.
  • Digital Time Setting: Press the 'MODE' button repeatedly until the time setting mode is displayed (usually flashing digits). Use 'START' or 'RESET' to adjust hours, minutes, and seconds. Press 'MODE' again to confirm and move to the next setting (e.g., date).
  • Date Setting: In digital time setting mode, continue pressing 'MODE' to cycle to month, day, and week settings. Adjust using 'START' or 'RESET'.
  • 12/24 Hour Format: This setting is usually adjusted within the digital time setting mode.

Operating Your Watch

Button Functions

  • LIGHT: Activates the EL backlight for a few seconds.
  • MODE: Cycles through different display modes (Time, Alarm, Stopwatch, Timer, Dual Time).
  • START: Used to start/stop functions (e.g., stopwatch) or increment values during setting.
  • RESET: Used to reset functions (e.g., stopwatch) or decrement values during setting.

Digital Display Modes

Press the 'MODE' button to navigate through the following display modes:

  • Time Mode: Displays current digital time, date, and day of the week.
  • Alarm Mode: Allows setting and activating/deactivating the daily alarm.
  • Stopwatch Mode: Measures elapsed time with start, stop, and reset functions.
  • Countdown Timer Mode: Sets a countdown from 60 minutes.
  • Dual Time Mode: Displays a second time zone.

Alarm and Chime

In Alarm Mode, use 'START' and 'RESET' to set the desired alarm time. Press 'MODE' to confirm. A separate button (often 'START' or 'RESET' in Time Mode) can toggle the hourly chime on or off.

Stopwatch Function

Enter Stopwatch Mode using the 'MODE' button. Press 'START' to begin timing, 'START' again to pause, and 'RESET' to clear the stopwatch to zero.

Countdown Timer

Navigate to Countdown Timer Mode. The timer can be set for up to 60 minutes. Use 'START' to begin the countdown and 'RESET' to stop or reset it.

EL Backlight

Press the 'LIGHT' button to illuminate the digital display for enhanced visibility in dark conditions.

Water Resistance

This watch is water resistant up to 50 meters (5 ATM). This means it is suitable for everyday use and can withstand splashes, rain, and brief immersion in water. It is not recommended for swimming, diving, or showering with hot water, as steam and pressure changes can compromise the seals. Do not operate buttons while the watch is wet or submerged.

Care and Maintenance

Cleaning

Wipe the watch case and strap regularly with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid using chemical cleaners, solvents, or abrasive materials.

Battery Replacement

When the watch display becomes dim or stops functioning, the battery may need replacement. It is recommended to have the battery replaced by an authorized service center or a professional watch repairer to ensure proper sealing and maintain water resistance.

Water Resistance Precautions

To maintain the water resistance of your watch, ensure the crown is always pushed in completely. Avoid exposing the watch to extreme temperature changes, which can cause seals to expand and contract, potentially leading to water ingress. Do not press any buttons while the watch is submerged in water.

Troubleshooting Guide

If you encounter any issues with your watch, please refer to the following common problems and solutions:

  • Digital Display is Blank/Dim: The battery may be low or depleted. Consider professional battery replacement.
  • Buttons are Unresponsive: Ensure the watch is not in a locked mode (if applicable). Try pressing the buttons firmly. If the issue persists, a soft reset (if available for your model) or battery replacement might be needed.
  • Time Inaccuracy: Check if the time was set correctly. If both analog and digital times are inaccurate, the battery might be weak, or the watch may require servicing.
  • Water Inside Watch: Immediately take the watch to an authorized service center. Do not attempt to dry it yourself.

Product Specifications

FeatureSpecification
Model Number87058PP03
Movement TypeQuartz
Display TypeDigital Analog
Case Diameter50 Millimetres
Band Material TypeThermoplastic Polyurethane (TPU)
Band ColourBlack
Water Resistance50 Meters (5 ATM)
Batteries1 Lithium Polymer battery (included)
Item Weight130 Grams
Product Dimensions (LxWxH)13 x 9 x 6 Centimeters
ManufacturerTitan Company Limited
Back view of the Sonata SF Vigour Quartz Digital Analog Watch, displaying the stainless steel case back with model number and water resistance markings.

Figure 3: Back view of the watch, showing the stainless steel case back with engraved details including the model number and water resistance rating.

Warranty Information

Your Sonata SF Vigour watch comes with a Limited Warranty provided by the manufacturer, Titan Company Limited. The terms and conditions of this warranty are typically outlined in the warranty card included with your purchase. Please retain your proof of purchase for any warranty claims. The warranty generally covers manufacturing defects but does not cover damage resulting from misuse, accidents, unauthorized repairs, or normal wear and tear.

Customer Support

For further assistance, technical support, or service inquiries regarding your Sonata SF Vigour watch, please contact Titan Company Limited, the manufacturer. You can find their contact details on their official website or through the customer service information provided with your product packaging.

Manufacturer: Titan Company Limited, #3, SIPCOT Industrial Complex, Hosur - 635126, Tamil Nadu, India.