Introduction
Thank you for choosing the 5Rcom Mobile TV Stand. This manual provides essential information for the safe and correct assembly, operation, and maintenance of your new TV stand. Please read these instructions thoroughly before beginning assembly and retain them for future reference.
Safety Information
Always observe the following safety precautions to prevent injury or damage to your equipment:
- Do not exceed the maximum weight capacity of 35 kg (77 lbs).
- Ensure your TV's VESA pattern is compatible with the stand (100x100mm to 400x400mm).
- Do not attempt to move the stand with a TV mounted if the wheels are not unlocked.
- Always lock the wheels when the stand is in a stationary position to prevent accidental movement.
- Keep children and pets away from the stand during assembly and operation.
- For detailed safety guidelines, please refer to the official safety document: Safety Information (PDF).
Package Contents
Verify that all components are present and undamaged before assembly. If any parts are missing or damaged, please contact customer support.
While a complete list of individual screws and small parts is not provided here, the main components typically include:
- Base with pre-attached wheels
- Main support column
- TV mounting brackets
- Adjustable media shelf
- Integrated power strip
- Hardware kit (screws, washers, spacers, Allen keys)
Specifications
| Feature | Detail |
|---|---|
| Model Number | DETF4001 |
| Compatible TV Sizes | 32 to 55 inches (also compatible with some 26-65 inch TVs if VESA and weight are met) |
| Maximum Weight Capacity | 35 kg (77 lbs) |
| VESA Compatibility | 100x100mm, 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm |
| Height Adjustment | Multiple levels, up to 1355 mm (from floor to center of TV) |
| Swivel Angle | ±30 degrees (60 degrees total) |
| Integrated Power Strip | 3 AC outlets, 1.5m power cable, power switch |
| Material | Metal frame, wooden base |
| Color | Black |
| Mobility | 4 lockable caster wheels |
Image: Compatibility check for VESA, TV size, and weight.
Image: Detailed dimensions and height adjustment range.
Assembly Instructions
Follow these steps carefully for proper assembly. It is recommended to have two people for certain steps, especially when mounting the TV.
- Prepare the Base: Attach the main support column to the wooden base using the provided screws. Ensure all screws are tightened securely.
- Install the Media Shelf: Slide the media shelf onto the main column at your desired height and secure it with the designated fasteners.
- Attach TV Brackets to TV: Identify the correct screws and spacers for your TV's VESA mounting holes. Attach the TV mounting brackets to the back of your television. Ensure they are level and securely fastened.
- Mount TV to Stand: Carefully lift the TV with the attached brackets and hook them onto the main column's TV plate. Ensure the TV is centered and level. Secure the TV using the safety lock mechanism on the brackets to prevent accidental dislodgement.
- Cable Management: Utilize the cable management clips or channels on the back of the column to route and organize your TV and device cables. This helps maintain a tidy appearance and prevents tripping hazards.
Image: Assembly of the main column to the base.
Image: Details of safety lock, cable management, and lockable wheels.
Operating Instructions
Height Adjustment
The TV stand allows for multiple height adjustments to achieve optimal viewing. To adjust the height:
- Ensure the TV is securely mounted.
- Loosen the height adjustment screws on the main column.
- Carefully raise or lower the TV to the desired position.
- Tighten the height adjustment screws firmly to lock the TV in place.
Image: TV plate height adjustment mechanism.
Swivel Function
The TV mount can swivel up to 30 degrees left or right for a wider viewing angle.
- Gently push the side of the TV to rotate it to your preferred angle.
- No locking mechanism is required for swivel; it holds its position through friction.
Image: Swivel adjustment for optimal viewing.
Moving the Stand
The stand is equipped with four lockable caster wheels for easy mobility.
- To move the stand, unlock all four wheels by flipping their levers.
- Carefully push the stand to its new location.
- Once in position, lock all four wheels to ensure stability and prevent accidental movement.
Image: Easily moving the stand with lockable wheels.
Using the Integrated Power Strip
The stand features a built-in power strip for convenient power access.
- Plug the stand's power cord into a wall outlet.
- Use the power switch on the strip to turn power on or off to the three AC outlets.
- Connect your TV, media players, or other devices to the outlets on the power strip.
Image: Integrated power strip details.
Maintenance
- Cleaning: Wipe the stand with a soft, dry cloth. For stubborn marks, a slightly damp cloth can be used, followed by immediate drying. Avoid harsh chemicals or abrasive cleaners.
- Hardware Check: Periodically check all screws and fasteners to ensure they remain tight. Re-tighten if necessary.
- Wheel Maintenance: Keep the caster wheels free of dust and debris to ensure smooth movement.
Troubleshooting
- Stand is wobbly: Ensure all assembly screws are tightened. Check that the TV is centered and within the weight limit. Ensure the floor surface is level.
- TV is not level: Adjust the TV mounting brackets slightly to correct the tilt. Ensure the stand itself is on a level surface.
- Wheels are difficult to move: Unlock all wheels. Check for any obstructions or debris caught in the wheels. Clean the wheels if necessary.
- Power strip not working: Ensure the stand's power cord is securely plugged into a functional wall outlet. Check the power switch on the strip is in the 'on' position. Test the wall outlet with another device.
Warranty and Support
For warranty information, product support, or to inquire about replacement parts, please refer to the manufacturer's official website or contact their customer service directly. Keep your purchase receipt as proof of purchase.
