Introduction
Thank you for choosing the GOESWELL Enchanted Willow Vine Lights. This manual provides essential information for the safe and efficient use of your new lighting product. Please read these instructions thoroughly before installation and operation, and retain them for future reference.
Image: GOESWELL Enchanted Willow Vine Lights installed on a wall, showcasing the flexible brown twig design and warm white LED illumination.
What's in the Box
Verify that all components are present in your package:
- One (1) set of Willow Vine Lights (7.5 feet, 144 LEDs)
- One (1) Remote Control
- One (1) US Plug (AC100-240V DC24V)
- One (1) Instruction Manual for Use
- One (1) Package Box
Image: The product package for the Lighted Willow Vine, illustrating the contents within the box.
Safety Information
- Indoor Use Only: This product is designed for indoor use. Do not expose to water or moisture.
- Power Source: Use only the provided power adapter. Using an incompatible adapter may damage the product and void the warranty.
- Avoid Overheating: Do not cover the power adapter or lights with flammable materials during operation.
- Handling: The vine branches are bendable; however, avoid excessive force or sharp bends that could damage the internal wiring.
- Children and Pets: Keep the product out of reach of small children and pets to prevent choking hazards or electrical shock.
- Disposal: Dispose of electronic components and batteries according to local regulations.
Setup
- Unpack: Carefully remove all components from the package.
- Uncoil and Shape: Gently uncoil the willow vine lights. The branches are flexible and can be bent and shaped to your desired configuration. Avoid sharp creases.
- Placement: Position the vine lights in your desired indoor location, such as along a wall, around a window, or draped over furniture.
- Secure (Optional): If needed, use small, clear adhesive clips (not included) to secure the vine lights to surfaces.
- Connect Power: Plug the DC connector of the vine lights into the provided US plug adapter. Then, plug the adapter into a standard AC100-240V wall outlet.
Image: Demonstrating the flexible and adjustable nature of the willow vine lights, allowing for custom shaping.
Operating Instructions
The GOESWELL Enchanted Willow Vine Lights are operated using the included remote control.
Image: The remote control for the willow vine lights, detailing its various function buttons including power, timer, lighting modes, and dimmer controls.
- Power On/Off: Press the ON button to turn the lights on, and the OFF button to turn them off.
- Select Lighting Mode: Choose from four available lighting modes:
- ALWAYS: Lights remain steadily on.
- BREATHING: Lights gently fade in and out.
- FLASH: Lights flash quickly.
- SLOW: Lights flash slowly.
- Adjust Brightness: Use the DIM+ button to increase brightness and the DIM- button to decrease brightness. There are 5 levels of brightness.
- Set Timer: Press the 4H button to activate the 4-hour timer. The lights will automatically turn off after 4 hours and will reactivate at the same time the next day.
Image: The 4-hour timer function of the willow vine lights, which automatically turns off the lights after 4 hours, eliminating the need for daily manual operation.
Remote Control Functions
| Button | Function |
|---|---|
| ON | Turns the lights on. |
| OFF | Turns the lights off. |
| 4H | Activates the 4-hour timer. Lights turn off after 4 hours and resume daily. |
| ALWAYS | Sets the lights to a steady-on mode. |
| BREATHING | Sets the lights to a gentle fade in/out mode. |
| FLASH | Sets the lights to a fast flashing mode. |
| SLOW | Sets the lights to a slow flashing mode. |
| DIM+ | Increases the brightness level (5 levels). |
| DIM- | Decreases the brightness level (5 levels). |
Maintenance
- Cleaning: Disconnect the power before cleaning. Wipe the lights and branches with a soft, dry cloth. Do not use liquid cleaners or immerse in water.
- Storage: When not in use, gently coil the vine lights and store them in their original packaging or a protective container in a cool, dry place.
- Battery Replacement (Remote): If the remote control stops responding, replace its battery (typically a CR2025 coin cell battery). Ensure correct polarity.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on. | No power, loose connection, remote battery dead. |
|
| Remote control is not working. | Remote battery dead, obstruction, remote too far. |
|
| Lights are dim or flickering. | Low brightness setting, power issue. |
|
Specifications
| Feature | Detail |
|---|---|
| Brand | GOESWELL |
| Model Number | LT007 |
| Light Source Type | LED |
| Number of LEDs | 144 |
| Light Color | Warm White |
| Color Temperature | 3000 Kelvin |
| Item Length | 7.5 Feet |
| Power Source | Corded Electric |
| Voltage | 24 Volts (DC) |
| Wattage | 3.6 watts |
| Indoor/Outdoor Usage | Indoor |
| Special Features | Adjustable, Bendable, Dimmable, Remote Controlled, Timer |
| Control Method | Remote |
| Material Type | Copper, Polyester |
Image: Detailed dimensions of the GOESWELL Willow Vine Lights and its components.
Warranty
The manufacturer provides a limited warranty for this product. Please refer to the included "Instruction Manual for Use" or contact customer support for specific warranty terms and conditions. Generally, this product comes with a 1-year manufacturer's warranty covering defects in materials and workmanship.
Support
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact GOESWELL customer support through the retailer where the product was purchased or visit the official GOESWELL website for contact information.
GOESWELL Store: Visit the GOESWELL Store on Amazon