LOAAO 23.6"x35.4" LED Bathroom Mirror Instruction Manual

1. Introduction

Thank you for choosing the LOAAO LED Bathroom Mirror. This mirror is designed to enhance your bathroom experience with its advanced features, including dimmable lighting, three color temperature options, an anti-fog function, and a memory setting. Please read this manual thoroughly before installation and use to ensure safe and optimal performance.

2. Important Safety Information

This product contains tempered glass which, while shatter-resistant, can still break. Always handle with care. The anti-fog feature works best in the center of the mirror and may decrease in effectiveness towards the edges. Always mount the mirror securely to the wall using the provided brackets, following the manufacturer's instructions. Do not install the mirror near heat sources or in areas prone to extreme temperature changes.

3. Product Features

• Dimmable & 3 Color Temperature: Adjust brightness by long-pressing the touch switch. Choose from warm light (3000 K), natural light (4000 K), or white light (6000 K).
• Defog Feature & Memory Function: Integrated defog function prevents fogging after showers, with a 1-hour auto-off. The memory function retains your last settings.
• Functional Upgrade: Modern design with both backlit and front-lit options for enhanced visibility during makeup application, shaving, or skincare.
• Easy Installation: Designed for easy installation with two Z-bar brackets. Can be powered via plug-in or hardwired connection.
• Tempered Glass: Constructed with 5 mm tempered glass for shatter-proof and explosion-proof safety and durability, providing clear reflection without distortion.

4. Package Contents

• LOAAO LED Bathroom Mirror
• Mounting Hardware (Z-bar brackets, screws, anchors)
• Instruction Manual

5. Installation Instructions

The LOAAO LED Bathroom Mirror can be installed vertically or horizontally. Ensure the mounting surface is sturdy and capable of supporting the mirror's weight (17.6 lbs).

5.1 Mounting the Mirror

1. Measure and mark the desired location for your mirror on the wall.
2. Attach the Z-bar brackets to the wall using appropriate screws and anchors, ensuring they are level and spaced correctly for your mirror's orientation.
3. Carefully lift the mirror and align the mirror's integrated Z-bar with the wall-mounted brackets. Gently lower the mirror until it is securely seated.

5.2 Power Connection

The mirror supports both plug-in and hardwired connections.

• Plug-in: Connect the mirror's power cord to a standard electrical outlet.
• Hardwired: For a seamless look, consult a qualified electrician to hardwire the mirror directly into your electrical system. This allows for control via a wall switch.

6. Operating Instructions

The mirror features intuitive touch controls integrated into the mirror surface.

6.1 Power On/Off and Brightness Adjustment

• Tap the power icon to turn the mirror lights on or off.
• Long-press the brightness icon to adjust the light intensity from dim to bright.

6.2 Color Temperature Selection

• Tap the color temperature icon to cycle through the three available light settings: warm light (3000 K), natural light (4000 K), and white light (6000 K).

6.3 Anti-Fog Function

• Tap the anti-fog icon to activate the defogging feature. This will prevent the mirror from fogging up during and after showers.
• The anti-fog function automatically turns off after one hour to conserve energy.

6.4 Memory Function

The mirror's memory function automatically saves your last brightness and color temperature settings, so you don't need to reset them each time you turn the mirror on.

7. Maintenance

To clean your LOAAO LED Bathroom Mirror, use a soft, damp cloth and a mild glass cleaner. Avoid abrasive cleaners or materials that could scratch the mirror surface or damage the LED components. Ensure the mirror is turned off before cleaning.

8. Troubleshooting

• Lights not turning on: Check if the mirror is properly plugged in or hardwired. Ensure the power outlet or wall switch is functional.
• Anti-fog not fully effective: The anti-fog heating pad is located in the center of the mirror for energy efficiency. Its effectiveness may decrease towards the edges, especially for larger mirrors. This is normal operation.
• Touch controls unresponsive: Ensure the mirror surface is clean and dry. If the issue persists, try cycling the main power to the mirror (unplug and replug, or flip the circuit breaker) to reset it.

9. Specifications

10. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact LOAAO customer service directly. Keep your purchase receipt for warranty claims.